Expansion and movement joint sealing in Slough
We carry out expansion and movement joint sealing in walls, decks and floors in Slough and the surrounding area. Send details for a fixed quote.
- New sealant over old, now failing
- Joints where the bead has lost adhesion
- Torn sealant in brick or block movement joints
Expansion joint sealing near Slough
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
How we handle expansion joint sealing in Slough
For movement joints in Slough, photos and approximate lengths are the best start. Send them through our quote form, and we’ll arrange a site visit if needed before issuing a fixed quote. To discuss the joints first, phone 01277 525 020 or email us. Most enquiries involve movement joints with split or torn sealant and weathered movement joint sealant that no longer flexes, on car park decks and ramps, precast concrete panel joints and podiums and floor movement joints. A single leaking joint is often how a building in Slough first comes to us: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Retail units, healthcare buildings and car parks in large towns all have movement joints in floors, decks and walls, and Slough is no different. Failed joints let water, grit and debris in, and the damage spreads from there.
We sign every job off with a 12-month guarantee. It’s a plain promise: if our work fails within that year, we put it right.
How a job runs
On arrival, we report to your site contact and complete whatever induction the building runs. Floors, finishes and fittings next to the joints are covered before any cutting starts, and the work normally takes a short visit for a handful of joints, or several days or more for a car park deck or long runs of facade joints. For premises in central Slough, deliveries and parking need a bit of planning, while out-of-town estates normally have yards and car parks. Either way, tell us what’s available.
- First the joints are inspected, widths measured and the type of failure noted.
- A fixed quote names the sealant we propose and its movement class.
- Where areas have to stay open, we agree a phased sequence before starting.
- The failed seal is cut out and both joint faces cleaned back to sound material.
- Backing rod or bond-breaker sets the depth, primer goes on where specified, and the sealant is applied and tooled.
- We check each joint with you, confirm the cure time and sign off under our 12-month guarantee.
What we need from you
- Let us know about inductions and permits
- Point out parking and an unloading spot
- Tell us your opening times and when work is allowed
Quotes
Tell us about the building, the joints and when you need the work done, and a fixed quote will follow. To get it moving, speak to us on 01277 525 020 or email us.
Related advice
Nearby places to Slough
Other services in Slough
Questions about Slough
Can you work at a site such as Slough Business Park, by Slough?
Yes, sites like Slough Business Park are within our area, along with the rest of Slough. Photos and a short description are enough for a first look.
Do we have to stop operations in Slough while the joints are sealed?
Rarely. Work is phased around your operations. Tell us which hours and entrances we can use and we’ll plan from there.
How long before the joints can be used?
Curing time varies by product, and we confirm it on the day, and flag anything to keep off until it has cured.
What site paperwork can you supply?
Requirements differ from site to site, so tell us what you need and we will confirm it when we quote.
Do you work in Slough?
Yes. We cover Slough, and the simplest way to start is to call 01277 525 020 or use the quote form.
Do the joint edges need to be sound before sealing?
Sound edges are essential. If they’re damaged, we will say so before any sealing so you’re not paying for a bead that won’t hold.
Do you reseal car park expansion joints?
Yes. Let us know the opening hours and which levels or bays have to stay available.
Floors, slabs and movement joints in Slough
Less than 3 miles from Slough there are at least three named estates and business parks. Sites like these are full of saw-cut floor joints, yard slabs and car park joints. Central London is about 22 miles from Slough. The South East has large numbers of industrial estates and warehouses along the motorway corridors.
Across sites such as Slough Retail Park, 0.6 miles to the west of Slough, floor and movement joints can be sealed in phases so units keep working. For a school such as Herschel Grammar School, playground and building joints can be done in the holidays.
Slough is about 22 miles west of London, in Slough. Anywhere in SL1, the process is the same: send details, get a fixed quote, we seal, and the work is guaranteed. We work across 11 places in Slough, large and small. We also cover Reading, some 17 miles away.
Work on movement joints is covered throughout SL1, SL3, SL2 and SL6, whatever the building. For a building on High Street, Station Road and London Road or nearby, send details and we will quote for movement joints. Slough sits on or close to the A4 and A332. If your building is just outside Slough, we cover Chalvey (1 mile south), Cippenham (1 mile west), Britwell (1 mile north-west), Farnham Royal (2 miles north) and Huntercombe (2 miles west).
Local landmarks in Slough
Around Slough, our work takes us to commercial buildings near Westgate School, Herschel Park and The Moon and Spoon pub and the streets around them. The closest station to Slough is Slough station, about 0.7 miles east. A little further out are Upton Hospital (0.9 miles south-east) and Windsor Castle (2.1 miles south). Green spaces nearby include Taplow Lake and Burnham Beeches.
Looking after the joints
Your facilities or cleaning team can help the joints last. Share these points with them:
- Keep scrapers and ploughs from dragging across joint sealant
- Keep product details with the building records for the next reseal
- Look over external and deck joints after a hard winter
- Report split or peeling joint sealant early
Add every elevation, deck and floor joint to your inspection round. A periodic look picks up tears and lifting before water gets in and long before edges start to break. If anything looks wrong, ring 01277 525 020 or email drawings and photos with photographs.
Unsupported floor joint edges spall under forklift and pallet-truck wheels. Damaged edges make the floor rough and wear wheels faster, and the damage spreads along the joint. Sealing early protects the edges.
Why deal with it now?
A like-for-like reseal of a joint that keeps splitting rarely lasts. If the joint is too narrow or the product wrong for the movement, it needs a different approach. If one joint has failed on your building in Slough, others of the same age may be close behind. Renewing them in one programme saves time later.
A quote for movement joints depends on how many there are, their condition and the access. Ask us for a fixed quote.
Why choose Mastic Doctor in Slough
- 12-month guarantee on workmanship
- Colours chosen to suit frames, cladding or finishes where possible
- Failed material removed, not covered up
- A range of standard colours, depending on the product
Take a look at what affects the cost or our accreditations and insurance.
Quoting for work in Slough
The price varies from site to site. It mainly depends on:
- Site requirements such as inductions and permits
- Access and working height
- Specialist products, such as fire-rated or hygienic sealants
- Working within restricted access windows
Cost follows what’s involved: stripping out, preparation, sealing, access and phasing. Call for a fixed quote and we will explain how it’s made up.
Sending details for a quote
There’s no need for a formal survey. These details are enough to start:
- Asbestos survey details if the building is older
- Specification clauses that apply
- When you need the work done
- Clear photos of the problem areas
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To ask for one, phone 01277 525 020 or email a schedule or drawings.
What we can’t put right
We seal joints; we don’t mend everything behind them. Sealant alone won’t deal with:
- A joint that has to be widened or re-detailed before it can work
- Leaks coming from the membrane rather than the joint seal
- Proprietary pre-formed expansion joint systems
If you are not sure, just speak to us on 01277 525 020 or send details through our quote form and we will give you a straight answer before you book.
Joints and surfaces we work on
- Blockwork control joints
- Cladding panel joints
- Precast concrete panel joints
- Brickwork movement joints
- Car park decks and ramps
- Podiums and floor movement joints
When to call us in Slough
When a bead pulls away from one face, it has lost adhesion. Poor preparation, a skipped primer, or sealant bonded to the back of the joint are typical reasons.
Most enquiries start with something like this:
- Hardened, cracked sealant on exposed facades
- Expansion joints filled with dirt and stones
- Car park joints leaking onto vehicles below
- New sealant over old, now failing
Hospitals like Upton Hospital, 0.9 miles south-east of Slough, have multi-storey or surface car parks whose joints carry vehicles round the clock.
Questions to ask before you book
- Health and safety accreditation such as CHAS
- Whether old or failed sealant will be cut out, not overlaid
- Can the work be phased to keep areas open?
- Is depth set with backing rod, or bond-breaker tape in shallow joints?