Expansion joint sealing in Shotgate
Sealant work in Shotgate for main contractors, managing agents and facilities managers: expansion and movement joint sealing in walls, decks and floors, quoted at a fixed price.
- Arrises breaking up along floor joints
- Expansion joints split through the centre of the bead
- Brittle, chalky sealant on external joints
Expansion joint sealing in Shotgate
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Expansion joint sealing in Shotgate
Mastic Doctor has sealed movement joints since 2005, for main contractors, FMs, managing agents and building owners. Our applicators are CSCS-carded, we are CHAS accredited and a Constructionline member, and we carry five million pounds of public liability insurance. Each job is backed by a 12-month guarantee on the workmanship. We work on brickwork movement joints, precast concrete panel joints and blockwork control joints, and the failures we’re asked to look at most are chipped joint edges on forklift routes and expansion joints filled with dirt and stones. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in Shotgate, preparation and product choice get the time they need.
In and around smaller places like Shotgate, the concrete floors we see are often in converted farm buildings, small workshops and storage units. Whether it’s a farm store turned workshop or a storage unit, the joints need a product that suits the traffic.
Our 12-month guarantee is about workmanship, not wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we spell out the cover before we begin.
- Location
- Shotgate (SS11, SS12)
- Wider area
- Essex
- Guarantee
- 12 months on every job
- Price
- Quoted before any work starts
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Floors, slabs and movement joints in Shotgate
The 3 miles around Shotgate take in at least three named trading estates, business parks or retail parks. Floors, loading bays and yards on sites like these are where floor and movement joints work hardest. Shotgate sits in one of the drier corners of the country, the South East. Outside joints in yards and car parks still have to be dry before sealing, while winter salting gets into any joint left open.
At places like Rawreth Industrial Estate, 1.8 miles to the east of Shotgate, joints are sealed a section at a time so operations carry on. On a site such as Annwood Lodge Business Park, which lies south of Shotgate, the movement joints are in car park slabs, paving and building elevations. Large sites such as Basildon University Hospital, 5.5 miles south-west of Shotgate, have car parks, service roads and long elevations with movement joints in brick and panels.
Shotgate is about 1 mile east of Wickford, in Essex. We send applicators to Shotgate for movement joints, handled exactly as we handle every other area. 644 places across Essex fall within our area, Shotgate among them. Our London page has more on work in that area (29 miles or so).
Anyone looking for expansion joint sealing in SS11 and SS12 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. We cover commercial and managed buildings on Third Avenue, First Avenue and Second Avenue and the roads nearby. Just outside Shotgate, we also work in Rawreth (1 mile east), Wickford (1 mile west), Battlesbridge (1 mile north-east), Runwell (2 miles north-west) and Brock Hill (3 miles north-west). Nearby towns on our patch include Chelmsford (9 miles north), Basildon (5 miles south-west), Brentwood (11 miles west), Maldon (10 miles north-east), Canvey Island (6 miles south) and Billericay (6 miles west).
Near you in Shotgate
Locally, jobs take us to sites close to Hilltop Infant School. The nearest railway station is Battlesbridge station, about 1.3 miles north-east. Other landmarks nearby include Basildon University Hospital (5.5 miles south-west) and Battlesbridge Motorcycle Museum (1.3 miles north-east). Green spaces nearby include Shotgate Thickets.
Should maintenance staff do it?
The visible bead is only part of the job. Correct depth, the right primer and a sealant matched to the movement are where general trades tend to cut corners.
General builders and handymen seal joints, but it isn’t their main trade. A specialist prepares properly, controls joint depth and picks a product with the right movement class.
Places near Shotgate
Other services in Shotgate
FAQs: Shotgate
Do you take on work at healthcare sites like Basildon University Hospital?
Yes. We work in healthcare settings as well as offices and schools. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
Is Shotgate off your patch?
No. Small places get the same service as large ones. Our area covers London and the South East counties. We plan jobs in smaller places so return trips are kept to a minimum.
Do your applicators hold CSCS cards?
Yes. Should the site need card details in advance, tell us and we will confirm them with the quote.
Is movement joint sealing guaranteed?
Each job is backed by a 12-month guarantee on the workmanship. Damage from later works or traffic loads outside the joint’s design isn’t a workmanship fault.
Are you CHAS accredited and on Constructionline?
Yes. Mastic Doctor is CHAS accredited and a Constructionline member, which helps with supplier vetting.
How soon can the area be used again?
We’ll confirm how long the chosen product needs to cure.
Why has the sealant in our expansion joints split?
Most often the movement is too much for the product or the joint width. We review the joint design as well as the sealant before pricing, rather than replacing like for like.
When it isn’t the sealant
Some faults sit outside our scope, and we point that out rather than sealing over them:
- Joints too narrow for the movement, which need redesigning by the engineer
- Waterproofing layers buried beneath the sealant
- Damaged metal nosings or cover plates over a joint
If you’re not sure, just speak to us on 01277 525 020 or email a schedule or drawings and we’ll give you a straight answer before you book.
What we seal
- Podiums and floor movement joints
- Brickwork movement joints
- Blockwork control joints
- Car park decks and ramps
- Cladding panel joints
- Precast concrete panel joints
On site: what to expect
We follow your site rules from the start: signing in, inductions and any permit to work. With the paperwork done, we take the joints in the sequence agreed with you. Jobs in and around smaller places like Shotgate are typically planned as a single visit, so we ask for photos and rough sizes first. That way the right products come on the day.
- First, the joints are inspected for width, movement and the type of failure.
- Next, we fix a price and confirm the sealant we propose for the movement.
- We strip out the old seal and prepare the faces.
- We control the depth with backing rod or, in shallow joints, bond-breaker tape.
- Primer goes on where the manufacturer specifies it, followed by the sealant, which is then tooled off.
- Each joint is inspected and handed over with our 12-month guarantee.
Before we start on site
- Send asbestos survey details if the building is pre-2000
- Let us know about inductions and permits
- Arrange parking or a loading space
Request a quote
Send us photos, drawings or a joint schedule are often enough for a fixed quote. Where a site visit makes more sense, we’ll arrange one.
Advice
Why act early in Shotgate
A torn seal left alone usually gets worse. Water and debris get in, the joint jams and the edges spall and the job grows to repairs as well as sealing. Resealing early keeps the work to sealant. One visit to deal with every failing joint makes more sense than several trips to a place like Shotgate, rather than one at a time. Send photographs of each area and we will quote for the lot.
A quote for movement joints depends on how many there are, their condition and the access, plus any specification you are working to. Call for a quote.
Why appoint us
- Fully insured, including public liability cover
- Our applicators hold CSCS cards
- RAL and finish matching where the product range allows
- Constructionline member for supplier checks
Read how commercial sealant jobs are priced and how we’re accredited.
How the job changes by surface
Car park decks and ramps
Deck and ramp joints take tyre loads, grit and de-icing salts. We use a sealant made for wheel loads and the expected movement, phased so parts of the car park stay open.
Cladding panel joints
Access to cladding joints is agreed before the price is fixed. Close-up photos help us judge the joints.
Quoting for work in Shotgate
Your fixed quote is built from the real scope. It takes account of:
- The product specified
- Whether the work must be split into stages
- The total length or number of joints
- Backing rod, priming and other preparation
Larger quantities, tricky access or phasing all shape the price. So do site requirements such as inductions and permits, along with the time of year for external work.
Before you send an enquiry
Diagnosis starts before we arrive. Tell us:
- Drawings or a marked-up plan, if available
- The type of building and who uses it
- Where the site is, with the postcode
- Any dates the work must fit around
If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price the work to it. For smaller jobs, photographs and a description will do.