Expansion joint sealing in Brentwood
We carry out expansion and movement joint sealing in walls, decks and floors in Brentwood and the surrounding area. Send details for a fixed quote.
- Sealant peeling off one face of the joint
- Spalled or broken joint edges in floors and decks
- Previous reseals laid over old sealant
Need expansion joint sealing in Brentwood?
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Site staff or a sealant specialist?
For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and we will confirm the paperwork you need with the quote.
About our expansion joint sealing in Brentwood
We cover the full range of movement joints: brickwork and blockwork joints, precast and cladding panel joints, concrete joints, car park decks and ramps, podiums and floor movement joints. The product depends on the movement, the weather and anything that runs over it. We work on brickwork movement joints, podiums and floor movement joints and cladding panel joints, and the usual reasons a site gets in touch are car park joints leaking onto vehicles below and damp inside where a wall movement joint has failed. Facilities teams, main contractors and managing agents in Brentwood tend to want the same three things: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
In Brentwood, as in most towns, brickwork and panel movement joints on public and commercial buildings age quietly. Once the sealant hardens or splits, water gets into the wall and the joint no longer works.
What our 12-month guarantee covers is the way we did the job: the preparation, the sealing and the tooling. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
Our process
We schedule the visit to fit the site hours and access windows you give us. On the day, the work area is kept contained and tidy, and we check in with your contact before moving on to each new area. In a town such as Brentwood, most jobs are single buildings. Your photos, drawings or a site visit come first, followed by a fixed quote.
- First, the joints are inspected for width, movement and the type of failure.
- A fixed quote follows, naming the sealant and its movement class.
- We strip out the old seal and prepare the faces.
- We control the depth with backing rod or, in shallow joints, bond-breaker tape.
- Where the maker calls for primer, it’s applied first, then the bead goes in and is tooled to a concave finish.
- Each joint is inspected and handed over with our 12-month guarantee.
Getting the site ready
- Arrange parking or a loading space
- Tell us which areas need to stay in use
- Tell us what induction or permit system the site runs
Get a fixed quote
To get a fixed quote, ring 01277 525 020 or send details through our quote form with the site address and an outline of the work. You can also send details through our quote form.
Read more
Questions we are asked in Brentwood
Can you take on a job at a hospital such as Nuffield Hospital?
Yes, hospitals are one of the sectors we cover. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
Do we have to stop operations in Brentwood while the joints are sealed?
In the majority of cases the site keeps working. Joints are done in phases, a bay, aisle or deck at a time. We agree the sequence and timings with you before we start.
Will your applicators have CSCS cards?
Yes. Should the site need card details in advance, tell us and we’ll confirm them with the quote.
How do I request a quote?
It works in four steps: send details, get a quote, we seal, guaranteed. Step one needs little more than photos and a postcode.
Can you seal joints in cold or wet weather?
Sealing onto a damp surface leads to adhesion failure, so external work waits for suitable conditions. The work is simply moved to the next suitable day.
Can staff carry on working while you are here?
Yes, as long as we plan it. We agree a sequence with your contact so just one area at a time is disrupted.
How long does movement joint sealing take?
Expect anything from part of a day to a couple of weeks, depending on joint lengths, widths and access. We’ll confirm when each area can be used again.
What we can’t put right
A few problems need another trade or a different fix, and we say so rather than covering them up:
- Changing the joint layout or spacing of a structure
- Structural movement beyond what the joints were designed for (that needs a structural engineer)
- Failed waterproofing membranes on podiums, roofs or decks (a waterproofing specialist’s job)
If you are not sure, just ring 01277 525 020 or email drawings and photos and we will give you a straight answer before you book.
Surfaces we seal
- Brickwork movement joints
- Blockwork control joints
- Precast concrete panel joints
- Cladding panel joints
- Car park decks and ramps
- Podiums and floor movement joints
Commercial clients in Brentwood
CHAS accredited and a Constructionline member, we make supplier vetting simple. Our insurance certificate can be sent along with the quote.
FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm with the quote.
Maintenance after handover
Sealant joints are maintenance items, and how long they last depends on how they’re treated. We suggest:
- Clear dirt from joint lines during routine cleaning
- Look over external and deck joints after a hard winter
- Keep scrapers and ploughs from dragging across joint sealant
- Report split or peeling joint sealant early
On car parks, winter clearance can damage deck joint sealant. Raising blades over joints where possible protects the seal.
On a multi-storey car park, a failed joint normally shows up as a leak onto the deck underneath. That water often carries de-icing salts with it and it can affect the structure over time. Resealing early limits the damage.
Different surfaces, different methods
Brickwork and blockwork joints
Vertical movement joints in brick and block walls let the masonry grow and shrink. They take a low-modulus sealant with a movement class to suit laid over backing rod at the correct depth.
Car park decks and ramps
Water coming through deck joints is the usual first sign. We strip the old seal, prepare the edges and seal again, and we will tell you if any edges need repairing first.
Towns and villages near Brentwood
What else we do in Brentwood
Slabs, ramps and loading bays in Brentwood
Central London is about 19 miles from Brentwood. Distribution warehouses and industrial estates are common around the motorway corridors that serve the capital. Rainfall across the South East, Brentwood included, is lower than in many parts of the UK. Even so, yard and car park joints are only sealed when they’re dry and clean, and winter de-icing salt on car parks and ramps works into any open joint.
Hospital campuses such as Nuffield Hospital, less than half a mile south-east of Brentwood, grow in stages, leaving movement joints wherever new blocks meet old. Schools such as Becket Keys Church of England School have movement joints in their walls and floors that are easy to overlook. On a site such as Warley Hill Business Park, 1.5 miles to the south of Brentwood, the movement joints are in car park slabs, paving and building elevations.
Brentwood is about 19 miles north-east of London, in Essex. If you’re looking for expansion joint sealing in Brentwood, we can help. 644 places across Essex fall within our area, including Brentwood. Sites around London have their own page, about 19 miles away.
If you need expansion joint sealing in CM13, CM14, CM15 and CM4, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. For a building on High Street, London Road and Old Church Road or nearby, we can quote for movement joints. Main routes into Brentwood include the A12 and A128, useful when we plan access and materials. Just outside Brentwood, we also work in Shenfield (1 mile north-east), Hutton Mount (1 mile east), Ingrave (2 miles south-east), Hutton (2 miles east) and Doddinghurst (3 miles north). Nearby towns on our patch include Chelmsford (11 miles north-east), Basildon (8 miles south-east), Harlow (13 miles north-west), Canvey Island (14 miles south-east), Billericay (5 miles east) and Rayleigh (13 miles east). As one of the bigger centres in Essex, Brentwood has a broad mix of commercial, public and industrial buildings, and we cover them all.
Landmarks near Brentwood
In Brentwood, that means premises near Sawyers Hall College, Weald Country Park and St Helen's Catholic Junior School. The closest station to Brentwood is Brentwood station, about 0.9 miles south. Nearby you’ll also find Brentwood Community Hospital (0.5 miles east). Not far away are Thorndon Park.