Expansion and movement joint sealing in Scourie, Highland
Looking for expansion joint sealing in Scourie? It’s simple: send details, get a quote, we seal, guaranteed.
- Movement joints with split or torn sealant
- Rain penetration at brick or block movement joints
- Hardened, cracked sealant on exposed facades
Expansion joint sealing near Scourie
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Expansion joint sealing in Scourie
Few joints take as much punishment as those in a car park. Wheel loads, grit and de-icing salts attack the seal and the concrete either side. A sealant suited to traffic and the expected movement goes in. If you are dealing with expansion joints split through the centre of the bead and hardened, cracked sealant on exposed facades, we can put it right, on precast concrete panel joints, cladding panel joints and blockwork control joints alike. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Scourie is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.
For floor or movement joints around smaller places like Scourie, we plan to finish in one visit where we can. Photos, approximate widths and what uses the floor help us bring the right materials.
Our workmanship is guaranteed for 12 months. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Location
- Scourie (IV27)
- Region
- Highland
- Cover
- 12 months on our workmanship
- Quotes
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Different surfaces, different methods
Car park decks and ramps
Car park joints are some of the hardest-working joints in any building. We use a sealant made for wheel loads and the expected movement with bays done in phases so the car park keeps running.
Joints between different materials
Different materials meeting at a joint rarely move in step. We choose a sealant that grips both faces priming where the maker calls for it.
Cost factors for movement joints
A fixed quote reflects the actual work. It takes account of:
- The site’s rules and procedures
- Backing rod, priming and other preparation
- How much there is to seal
- Which sealant the job calls for
The specified product makes a difference, and so does the preparation, from cutting out to priming and backing rod. Access, phasing and site rules also count.
Sending details for a quote
A few photographs plus some basic facts will normally do. Please tell us:
- Approximate linear metres or a joint schedule
- Any dates the work must fit around
- What the building is and how it’s used
- Access details, including height
Photos, drawings or a schedule of the joints and a fixed quote comes back to you. Where a site visit makes more sense, we’ll arrange one.
Expansion joint sealing around Scourie: points for this area
Scourie sits close to the coast, within about 1 mile. Coastal yards and decks give their joints salt and wet weather to deal with, not just wheels, so a failed joint lets more in and the edges break up sooner. Scourie is on Scotland’s wetter western side. Open joints in car parks and yards let in more water than in drier areas. Outside joints are sealed in dry spells, so dates have some give.
Around Scourie, each joint gets a filler or sealant matched to what crosses it and how much it moves. Once a joint near Scourie opens up, grit and water get in and the edges start to break.
Scourie is in Highland. Any commercial site in Scourie is covered, whether it’s a single job or part of a planned programme. Across Highland, 256 places are covered, Scourie among them.
We cover the IV27 postcode districts. Among the streets we cover are Moffat Square and Harbour Road, and sites on any of them can send details for a fixed quote. If your building is just outside Scourie, we cover Scourie More (1 mile south-west), An Druim Beag (8 miles south), Kinlochbervie (8 miles north-east), Stor (12 miles south-west) and Stoer (12 miles south-west). Where a site is remote or on an island, we plan travel and materials carefully, so the full address helps from the start.
Landmarks near Scourie
Green spaces nearby include Loch Bad nam Mult and Handa Island.
Leave it or put it right?
A like-for-like reseal of a joint that keeps splitting rarely lasts. If the joint is too narrow or the product wrong for the movement, it needs a different approach and we’ll tell you honestly. For buildings near Scourie, dealing with all the failing joints at once saves return trips. Send photos and we will quote for everything together.
There’s no price list, because the scope varies so much from one building to the next. For a fixed figure, call for a quote and we’ll price your job on its own details.
Why clients in Scourie choose us
- Colours chosen to suit frames, cladding or finishes where possible
- Constructionline member
- Sealing commercial buildings since 2005
- Our applicators hold CSCS cards
Read what affects the cost and how we’re accredited.
Common questions from Scourie clients
Is Scourie too small for you to travel to?
Not at all. Scourie is within our area. Our area covers all of Scotland, cities, towns and islands alike. Where we can, we group nearby jobs to make the most of each trip.
Do we have to stop operations in Scourie while the joints are sealed?
In the majority of cases the site keeps working. Joints are done in phases, a bay, aisle or deck at a time. We agree the sequence and timings with you before we start.
Does weather matter for sealant work?
It can, when the joints are outside. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so we watch the forecast and rearrange outside work if we have to. Indoors, the weather is rarely a problem.
Can you seal joints in cold or wet weather?
Outside work depends on conditions: rain, frost and condensation all stop sealant bonding. Indoor joints can typically carry on regardless.
Can the building stay open while you work?
In most cases, yes. Phased work can be planned so areas stay in use.
Is any job too small?
Whatever the size, the process is the same: send details, get a fixed quote, we seal, guaranteed.
Can you send site paperwork?
Let us know which documents the site needs, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm them with the quote.
Doing it in-house
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
When something else is needed
Honesty saves time and money. New sealant won’t cure:
- Joints too narrow for the movement, which need redesigning by the engineer
- Damaged metal nosings or cover plates over a joint
- Waterproofing layers buried beneath the sealant
Not sure which it is? You can phone 01277 525 020 or send photos by email and we will tell you honestly.
Joints and surfaces we work on
- Cladding panel joints
- Precast concrete panel joints
- Brickwork movement joints
- Car park decks and ramps
- Blockwork control joints
- Podiums and floor movement joints
Also near Scourie
What else we do in Scourie
Our process
Site rules come first: signing in, inductions and any permit to work. With the paperwork done, the joints are worked through in the order agreed with your site contact. For work around Scourie, we aim for one trip, which is why we ask for photos and a full list first. External joints need a dry spell as well.
- The first job is to check each joint: how wide it is, how it moves and why the old seal let go.
- Next, we fix a price and confirm the sealant we propose for the movement.
- Old sealant and filler are cut out and the joint faces cleaned back to sound material.
- Closed-cell backing rod is set to depth, or bond-breaker tape in shallow joints.
- Where the maker calls for primer, it’s applied first, then the bead goes in and is tooled to a concave finish.
- We check every joint before sign-off, and the work carries our 12-month guarantee.
What we need from you
- Let us know about inductions and permits
- Tell staff and tenants when we’ll be in
- Point out parking and an unloading spot
Request a quote
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we will fill any gaps with a visit.