Expansion joint sealing in Lyminster
Expansion and movement joint sealing in walls, decks and floors in Lyminster and across West Sussex. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Previous reseals laid over old sealant
- Hardened, cracked sealant on exposed facades
- Chipped joint edges on forklift routes
Expansion joint sealing across Lyminster
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Expansion joint sealing in Lyminster
Buildings and slabs are never completely still: they expand in the heat, shrink as they dry, and shift under load. Expansion and movement joints are built in so the structure can move without cracking. We seal and reseal movement joints in walls, panels, decks and floors for buildings in Lyminster. We work on podiums and floor movement joints, car park decks and ramps and cladding panel joints, and the failures we are asked to look at most are arrises breaking up along floor joints and layers of sealant in a movement joint. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in Lyminster, preparation and product choice get the time they need.
For a site near Lyminster, measurements and photos up front mean one trip where possible, with the right materials on hand. Tell us the joint widths if you can, and what drives or walks over them.
Work we carry out comes with a 12-month guarantee. Should something we installed fail, call 01277 525 020 or email drawings and photos and we’ll come back to it.
- Place
- Lyminster (BN17)
- Region
- West Sussex
- Cover
- 12 months on every job
- Price
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Traffic, movement and joints around Lyminster
The sea is no more than about 2 miles from Lyminster. External movement joints in car parks, ramps and yards near the coast take salt and wind-driven rain on top of traffic, which is why split joints are worth sealing before the edges deteriorate. At least three named trading, business or retail sites lie within about 3 miles of Lyminster. Floors, loading bays and yards on sites like these are where floor and movement joints work hardest.
Across sites such as Riverside Industrial Estate (1.2 miles south of Lyminster), floor and movement joints can be sealed in phases so units keep working. Warehouse floors on estates like Lineside Road Industrial Estate (1 mile south of Lyminster) carry pallet trucks and forklifts over every saw-cut joint. Hospital campuses such as Arundel & District Community Hospital (to the north-west of Lyminster) grow in stages, leaving movement joints wherever new blocks meet old.
Lyminster is about 1 mile north-west of Littlehampton, in West Sussex. Looking for expansion joint sealing in Lyminster? We can help, as we do across West Sussex. Lyminster is one of 373 places in West Sussex on our list. For work in that direction, see our Brighton page.
Anyone looking for expansion joint sealing in BN17 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. For a building on Arundel Drive, Old Mead Road and Lyminster Road or nearby, we can quote for movement joints. If your building is just outside Lyminster, we cover Wick (1 mile south), Toddington (1 mile south-east), Crossbush (1 mile north-east), Tortington (1 mile west) and Littlehampton (1 mile south-east). Bigger towns within reach include Worthing (6 miles east), Bognor Regis (7 miles south-west), Chichester (10 miles west), Selsey (12 miles south-west), Shoreham-by-Sea (12 miles east) and Lancing (10 miles east).
Around Lyminster
Recent enquiries here include premises near The 6 Bells Public House, The Littlehampton Academy and Littlehampton College. The closest station to Lyminster is Arundel station, about 1.3 miles north of the centre. Nearby you will also find Arundel and District Hospital (1.9 miles north-west) and Rustington Museum (2.3 miles south-east). The countryside around Lyminster includes Highdown Hill and WWT Arundel.
How the quote is worked out
Quotes vary with the job. Expect it to depend on:
- How accessible the joints are
- Induction, permit and paperwork requirements
- Specialist products, such as fire-rated or hygienic sealants
- Quantities, in metres or numbers
We don’t publish prices, since every building and every scope is different. Call for a quote.
What we need to price the job
Whether it’s one area or a whole building, these details speed things up:
- When you need the work done
- Specification clauses that apply
- Approximate linear metres or a joint schedule
- The type of building and who uses it
We quote a fixed sum against the scope you give us, so you know the figure before anyone is on site. To start the process, phone 01277 525 020 or email the details over.
Why it’s worth doing now in Lyminster
Combining joint work with other maintenance reduces set-up costs. Leaking joints need sealing now because damage continues. Urgent joints now, the rest later, is often the sensible plan. For buildings around smaller places like Lyminster, water damage can go unnoticed for longer, especially where a building isn’t used daily, so a failed joint can leak for a while before anyone sees it. Resealing early avoids that.
Access can matter as much as the joints themselves: easy-to-reach joints are quicker than those that need equipment to get to. Mention the access as part of your enquiry.
Why appoint us
- Fully insured, including public liability cover
- Failed material removed, not covered up
- Sealing commercial buildings since 2005
- One contact handling all your sites
See how commercial sealant jobs are priced and our accreditations and insurance.
Nearby places to Lyminster
Also in Lyminster
Lyminster: questions and answers
Our building in Lyminster is near the coast: does that change the sealant?
It can. Coastal exposure works external joints harder than inland weather. We check the specified product suits the exposure and pay close attention to preparation.
Do you take on work at healthcare sites like Arundel & District Community Hospital?
Yes, healthcare and care buildings are part of our work. Work is phased so departments keep running, under the site’s own rules.
Do you work in Lyminster?
Yes. Lyminster falls within our area, and you can phone 01277 525 020 or email the details over to get started.
How much does the work cost?
That depends on the job: the volume of work, the access, the specified product and how it’s phased. Call for a quote and we will price it properly.
Who decides which product is used?
The specification comes first, if there is one. Without one, the joint decides: its movement, its surfaces and what it has to cope with.
Can you send site paperwork?
Requirements differ from site to site, so list what you need, whether RAMS, insurance or CSCS details, and we’ll confirm with the quote.
Can you seal car park deck joints?
Yes. We use a sealant designed for wheel loads and the expected movement with bays phased so the car park keeps operating.
Maintenance after handover
Every sealant joint needs some looking after, and how long they last depends on how they’re treated. Our advice:
- Include every elevation and deck joint in periodic inspections
- Check joints after long freezing spells
- Plan racking layouts so feet don’t land on a joint
- Reopen bays and walkways only after the stated cure time
Floor joints on main traffic routes need watching more closely than the rest. Keep racking feet and heavy point loads off joint lines and flag chipped arrises before they spread.
Floor joints with failed fillers break up quickly under wheels. Broken arrises jolt trucks, loads and drivers. Sealing early protects the edges.
On site: what to expect
At the end of each section, the masking comes off, the area is cleaned and every joint is checked, ready for your sign-off. Where the sealant needs time to cure before use, we tell you and sign the area. If others near Lyminster need work, visits can be combined, which keeps travel down. You will have a fixed quote before work starts.
- First the joints are inspected, widths measured and the type of failure noted.
- A fixed quote names the sealant we propose and its movement class.
- Where areas have to stay open, we agree a phased sequence before starting.
- We strip the old sealant or filler and prepare each face until it’s sound and dry.
- Backing rod or bond-breaker sets the depth, primer goes on where specified, and the sealant is applied and tooled.
- We check each joint with you, confirm the cure time and sign off under our 12-month guarantee.
Getting the site ready
- Move anything stored against the joints
- Flag any permit to work we’ll need
- Send asbestos survey details if the building is pre-2000
Getting a fixed quote
Pricing a project or setting a maintenance budget? Send the scope and any drawings, and we’ll return a fixed quote you can plan around. If you have questions first, ring 01277 525 020 or email us.
Read more
Owners, agents and contractors
Whether you’re a managing agent, a property factor or an owner’s representative: send details, get a fixed quote, we seal, guaranteed. We can agree access arrangements and keyholder contacts beforehand.
Facilities managers want contractors who arrive with the paperwork sorted. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm with the quote.
When something else is needed
Honesty saves time and money. New sealant won’t cure:
- Crumbling edges that would give a new bead nothing sound to grip
- Movement on a scale no sealant is meant to absorb
- A joint that has to be widened or re-detailed before it can work
Not sure which it is? You can phone 01277 525 020 or email the details over and we will tell you honestly before you book.
Surfaces we seal
- Blockwork control joints
- Podiums and floor movement joints
- Brickwork movement joints
- Cladding panel joints
- Precast concrete panel joints
- Car park decks and ramps