The Mastic Doctor team standing beside their branded vans outside an office building
Dundee · Scotland

Expansion and movement joint sealing in Pitkerro, Dundee

Expansion joint sealing in Pitkerro, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.

  • Hardened, cracked sealant on exposed facades
  • Water getting into the wall through a failed joint
  • Layers of sealant in a movement joint
1
Send details
Send the specification, photos or a marked-up plan.
2
Get a quote
One fixed quote covering the agreed scope.
3
We seal
CSCS-carded applicators, the right product for each joint.
4
Guaranteed
Our workmanship is guaranteed for 12 months.
London, the South East & Scotland
Constructionline member
Fully insured: £5m PL

Expansion joint sealing in Pitkerro

Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.

Expansion joint sealing in Pitkerro, done properly

Few joints take as much punishment as those in a car park. Wheel loads, grit and de-icing salts attack the seal and the concrete either side; water dripping through to the deck below is often the first sign. We reseal deck and ramp joints with a trafficable sealant chosen for the movement. We work on podiums and floor movement joints, cladding panel joints and car park decks and ramps, and the usual reasons a site gets in touch are debris jammed in movement joints and damp inside where a wall movement joint has failed. Whoever orders the work in Pitkerro, the brief is normally the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.

In Scottish cities, where newer extensions meet older stone buildings, movement joints take the difference. They need the right movement class and correct width and depth to last.

What our 12-month guarantee covers is the way we did the job: the preparation, the sealing and the tooling. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.

Place
Pitkerro (DD4)
Wider area
Dundee
Cover
12 months on our workmanship
Quotes
Fixed quote, scope in writing
Call
01277 525 020
Updated
3 November 2026
The Mastic Doctor team standing beside their branded vans outside an office building

Leave it or put it right?

On a car park, resealing joints in phases keeps the deck open. Work can be planned so parts of the deck stay open. We agree phasing with you before work starts. In a tenement or shared city building, water from a failed joint can reach other owners’ property, which makes early repair simpler for everyone. Fixing it promptly keeps repairs small.

What a job costs comes down to the quantity of joints, how much old material needs removing and the access. Call for a fixed quote once you have the details.

Why choose Mastic Doctor in Pitkerro

  • Our applicators hold CSCS cards
  • RAL and finish matching where the product range allows
  • A Constructionline member, so easy to vet
  • Commercial sealant work since 2005

See our cost guide and how we’re accredited.

Owners, agents and contractors

If you look after buildings for someone else, you need clear quotes and clear reporting. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative.

Hotels, schools, healthcare sites, offices and retail units book us directly too. The work is planned around how the building runs, so guests, pupils, patients or staff are disturbed as little as possible.

What we can’t put right

Some faults sit outside our scope, and we point that out rather than sealing over them:

  • Mechanical expansion joint covers, cover plates or proprietary joint systems (a specialist supplier’s job)
  • Changing the joint layout or spacing of a structure
  • Failed waterproofing membranes on podiums, roofs or decks (a waterproofing specialist’s job)

Not sure which it is? You can phone 01277 525 020 or send details through our quote form and we will tell you honestly before you book.

What we seal

  • Car park decks and ramps
  • Podiums and floor movement joints
  • Cladding panel joints
  • Precast concrete panel joints
  • Brickwork movement joints
  • Blockwork control joints

Surface by surface

Internal floor movement joints

Warehouse and retail floors have saw-cut induced joints and construction joints. Trafficked floor joints often get a semi-rigid filler and a flexible sealant where the joint moves more.

Joints between different materials

Different materials meeting at a joint rarely move in step. The product must bond to both substrates and cope with the movement.

Cost factors for movement joints

The price varies from site to site. It mainly depends on:

  • Location, for remote and island sites
  • Any access equipment needed
  • Whether the work must be split into stages
  • Specialist products, such as fire-rated or hygienic sealants

No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. A fixed quote follows once we understand the job.

Before you send an enquiry

A good diagnosis starts with the right details. Let us know:

  • Drawings or a marked-up plan, if available
  • Anything awkward about access or site hours
  • Clear photographs of the problem areas
  • The postcode of the building

Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price against exactly what is specified. Smaller jobs need nothing more than photographs and a few notes.

Expansion joint sealing around Pitkerro: how the place shapes the job

Pitkerro sits close to the coast, within about 2 miles. External movement joints in car parks, ramps and yards near the coast take salt and wind-driven rain on top of traffic, which is why split joints are worth sealing before the edges deteriorate. At least three named trading, business or retail sites lie within about 3 miles of Pitkerro. That puts plenty of warehouse floors, service yards and car parks close by, all with joints under traffic.

Retail parks like Happyhillock Shopping Centre, under half a mile to the east of Pitkerro, have long runs of car park and yard joints taking daily traffic. Across sites such as New Craigie Retail Park, which lies south of Pitkerro, floor and movement joints can be sealed in phases so units keep working. Campuses like Abertay University, 2 miles south-west of Pitkerro, mix old and new buildings, with movement joints wherever they meet.

Pitkerro is about 2 miles east of Dundee, in Dundee. Any commercial site in Pitkerro is covered, whether it’s a single job or part of a planned programme. Pitkerro is one of 28 places in Dundee on our list for movement joints.

We take on movement joints across the DD4 postcode area. Among the streets we cover are Fintry Road, Rennell Road and Midmill Road, and sites on any of them can send details for a fixed quote. Being close to the A972, Pitkerro is straightforward for us to reach. If your building is just outside Pitkerro, we cover Whitfield (1 mile north-east), Mill of Mains (1 mile north-west), Craigiebank (1 mile south), Douglas (1 mile east) and Ballumbie (1 mile north-east). A short drive away, we cover Broughty Ferry (3 miles east), Blackness (3 miles south-west), Barnhill (3 miles east), Logie (3 miles south-west), St Marys (3 miles west) and Lochee (3 miles west).

Around Pitkerro

Around Pitkerro, our work takes us to commercial buildings near Morgan Academy, St Roque's Library and Baxter Park, among other places. Pitkerro’s nearest station is Dundee station, roughly 2.3 miles south-west of the centre. Nearby you’ll also find Maryfield Hospital (1.1 miles south-west) and McManus Gallery (2 miles south-west). Open spaces near Pitkerro include Trottick Mill Ponds and Balgay Hill.

Map of Pitkerro © OpenStreetMap contributors

On site: what to expect

When we get to site, we report to your site contact and complete whatever induction the building runs. Everything around the joints gets protected before any cutting starts, with the work itself normally taking anything from part of a day to a couple of weeks, depending on joint lengths, widths and access. In a Scottish city, kerbside space and loading need planning, especially near the centre. Tenement closes, shared stairs and factor approvals may also be involved.

  1. First the joints are inspected, widths measured and the type of failure noted.
  2. A fixed quote names the sealant we propose and its movement class.
  3. Where areas have to stay open, we agree a phased sequence before starting.
  4. We strip the old sealant or filler and prepare each face until it’s sound and dry.
  5. Backing rod or bond-breaker sets the depth, primer goes on where specified, and the sealant is applied and tooled.
  6. Finished joints are inspected, the cure time confirmed and the 12-month guarantee applies.

What we need from you

  • Point out any areas we must not close
  • Flag any permit to work we will need
  • Send your site hours and access windows

Request a quote

To get a fixed quote, call 01277 525 020 or email a schedule or drawings, telling us the site location and the nature of the job. Our quote form is another easy route.

Ask for a quote

Related advice

Pitkerro: questions and answers

Does the sea air around Pitkerro change the choice of sealant?

It can. Coastal exposure works external joints harder than inland weather. That puts more weight on product choice, primers where the manufacturer specifies them, and correct joint sizing.

Does your area include sites such as Happyhillock Shopping Centre, near Pitkerro?

Yes. Our area takes in Pitkerro and its surroundings, with estates and business parks such as Happyhillock Shopping Centre included. Photos and a short description are enough for a first look.

Do you take on small jobs?

Whatever the size, the process is the same: details, then a fixed price, then sealing, then a 12-month guarantee.

Are you CHAS accredited and on Constructionline?

Yes. We are CHAS accredited and a Constructionline member, which helps with supplier vetting.

Are your applicators CSCS-carded?

Yes. We use CSCS-carded applicators, as many construction sites ask for.

What’s the difference between an expansion joint and a movement joint?

The general name is movement joint, and expansion joint is one common type. On site, people tend to use them interchangeably, and the sealing method is much the same.

Why do our movement joints keep failing?

It depends on how the sealant has let go: a split through the middle points to over-stretching, while peeling from one face points to preparation or primer. Broken edges are a third possibility.

Accreditations

Trusted. Accredited. Insured.