The Mastic Doctor team standing beside their branded vans outside an office building
Glasgow · Scotland

Expansion and movement joint sealing in Newbank, Glasgow

Commercial sealant work in Newbank for contractors, FMs and building owners: expansion and movement joint sealing in walls, decks and floors, quoted at a fixed price.

  • Sealant pulling off the joint face
  • Movement joints with split or torn sealant
  • Arrises breaking up along floor joints
1
Send details
Drawings, photos, a joint schedule or a site visit.
2
Get a quote
A fixed quote for the work, with the scope in writing.
3
We seal
The right sealant, to the right depth, neatly finished.
4
Guaranteed
Backed by a 12-month workmanship guarantee.
Covering the South East & Scotland
CHAS accredited
£5m public liability

Expansion joint sealing in Newbank

Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.

What we are called out for in Newbank

With no backing rod or bond-breaker in place, sealant grips the base of the joint too. Bonded on three faces, it can’t stretch evenly when the joint opens so backing is set before sealing.

Look out for the following:

  • New sealant over old, now failing
  • Expansion joints filled with dirt and stones
  • Spalled or broken joint edges in floors and decks
  • Weathered movement joint sealant that no longer flexes

A healthcare site such as Lightburn Hospital (1.6 miles north-east of Newbank) depends on car parks, ramps and service yards whose joints take traffic all day.

Before you book anyone

  • Is depth set with backing rod, or bond-breaker tape in shallow joints?
  • Will RAMS and insurance details be available?
  • Will failed sealant be removed rather than covered?
  • Will CSCS-carded applicators be on site?

How to choose a sealant contractor

Expansion joint sealing in Newbank, done properly

Internal floor joints take trolleys, pallet trucks and forklifts. Unsupported edges break up under wheels. If the arrises are already broken, we’ll say so before sealing. We work on cladding panel joints, podiums and floor movement joints and car park decks and ramps, and the usual reasons a site gets in touch are damp inside where a wall movement joint has failed and debris jammed in movement joints. A specialist sealant contractor works differently from a general builder: on jobs in Newbank, preparation and product choice get the time they need.

In Scottish cities, where newer extensions meet older stone buildings, movement joints take the difference. Those joints need a sealant with the right movement capability, sized to the gap.

Building owners and contractors get the same cover: a 12-month guarantee on our workmanship. It doesn’t extend to damage, faults in the building or work by others, and we are upfront about that.

Mastic Doctor team members lined up next to their branded vans outside an office building
Place
Newbank (G31, G40, G32)
Wider area
Glasgow
Cover
12 months on our workmanship
Price
Quoted before any work starts
Telephone
01277 525 020
Last updated
3 November 2026

Expansion joint sealing in Newbank: the local picture

The west of Scotland, where Newbank is, gets more rain than the east. Open joints in car parks and yards let in more water than in drier areas. Outside joints are sealed in dry spells, so dates have some give. Newbank has at least three named business or industrial parks inside a 3-mile radius. That puts plenty of warehouse floors, service yards and car parks close by, all with joints under traffic.

Campuses like University of Strathclyde, 1.6 miles to the north of Newbank, mix old and new buildings, with movement joints wherever they meet. At a retail site such as The Forge Shopping Centre, which lies north of Newbank, trolleys, cages and cars run over floor and slab joints all day.

Newbank is about 3 miles east of Glasgow, in Glasgow. Commercial clients in Newbank can call on us for movement joints, as part of our coverage of Glasgow. Newbank is one of 171 places we cover in Glasgow.

Business premises anywhere in G31, G40 and G32 are within our area for movement joints. If your site is on Yate Road, Arrol Road and Perth Lane or close by, we can quote for movement joints. If your building is just outside Newbank, we cover Barrowfield (1 mile west), Camlachie (1 mile north-west), Haghill (1 mile north), Gallowgate (1 mile north-west) and Bridgeton (1 mile west). Bigger towns within reach include Glasgow (3 miles west), Hillhead (4 miles north-west), Dowanhill (4 miles north-west), Woodlands (3 miles north-west), Woodside (3 miles north-west) and North Kelvinside (4 miles north-west).

Near you in Newbank

Locally, jobs take us to sites close to St Andrew's Secondary School, Parkhead Library and 1 pub, among other places. For rail, the closest station is Duke Street station, roughly 0.8 miles north-west. Other landmarks nearby include The Forge Shopping Centre (under half a mile north) and Parkhead Hospital (under half a mile north-east). For a walk, there’s Cathkin Braes and Hogganfield Loch.

Map of Newbank © OpenStreetMap contributors

Looking after the joints

Your facilities or cleaning team can help the joints last. Pass these on to them:

  • Raise snow-clearing blades over deck joints where possible
  • Leave barriers in place until fresh joint sealant has cured
  • Inspect movement joints alongside other routine building checks
  • Record the sealant used and the date in the O&M file

Snow ploughs and scrapers catch on joint lines. Raising blades over joints where possible protects the seal and a look at the joints after winter catches any damage.

An open joint fills with grit, and a joint full of grit can’t close. The edges then take the pressure and start to spall. A sound seal keeps the joint working.

What sealant work can’t fix

Part of a good diagnosis is knowing where sealant stops. You’ll hear from us if the cause turns out to be one of these:

  • Cracking or settlement that calls for an engineer’s assessment
  • Joints too narrow for the movement, which need redesigning by the engineer
  • Crumbling edges that would give a new bead nothing sound to grip

If you’re not sure, just give us a call on 01277 525 020 or email drawings and photos and we’ll give you a straight answer.

Joints and surfaces we work on

  • Podiums and floor movement joints
  • Blockwork control joints
  • Precast concrete panel joints
  • Cladding panel joints
  • Car park decks and ramps
  • Brickwork movement joints

Diagnose, treat, sign off

The first thing on site is a walk round with your contact, to confirm the scope, the order of work and any areas we must keep clear. Then we strip out anything that has failed, prepare every joint and seal it. University, hospital and office estates in Scotland’s cities have their own permits, inductions and sign-in rules. Pass on the site’s contractor rules when you get in touch.

  1. First, the joints are inspected for width, movement and the type of failure.
  2. You get a fixed quote with the product and its movement capability stated.
  3. Old sealant and filler are cut out and the joint faces cleaned back to sound material, flagging any broken edges that need repair before sealing.
  4. Backing rod goes in at the right depth, or bond-breaker tape where the joint is shallow.
  5. Where the maker calls for primer, it’s applied first, then the bead goes in and is tooled to a concave finish.
  6. We check every joint before sign-off, and the work carries our 12-month guarantee.

What we need from you

  • Tell us your opening times and when work is allowed
  • Explain the parking and delivery arrangements
  • For older buildings, check the asbestos register before work

Get a fixed quote

A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Send what you have, and we will arrange a site visit if anything is unclear.

Get a price

Advice

Cost factors for movement joints

Quotes vary with the job. Expect it to depend on:

  • Phasing around occupants
  • Which sealant the job calls for
  • Site requirements such as inductions and permits
  • Joint width, depth and condition

No two sites price the same: joint size, product, access and site hours all play a part. A fixed quote follows once we understand the job.

What we need to price the job

There’s no need for a formal survey. These details are enough to start:

  • The asbestos register, for older buildings
  • Whether the building will be occupied during the work
  • A wide shot and a close-up of the area
  • Anything awkward about access or site hours

Send us photographs, drawings or a joint schedule and a fixed quote comes back to you. If the job needs a look first, we will arrange a site visit.

FAQs: Newbank

Do you cover business parks and estates near Newbank, such as Forge Retail Park?

Yes, sites like Forge Retail Park are within our area, along with the rest of Newbank. Send details of the unit and the work through our quote form for a quick quote.

Can you work on a hospital site such as Lightburn Hospital?

Yes. Healthcare sites are among the places we work. The estates team’s permit system and infection-control rules come first, and the work is planned around them.

Can you fit around our working hours?

Give us your site hours and any access windows in your enquiry, and we will schedule the work to suit. You can reach the office between 8am and 5pm, Monday to Friday.

Do you guarantee expansion joint work?

Our workmanship on movement joints carries a 12-month guarantee. Damage from later works or traffic loads outside the joint’s design isn’t a workmanship fault.

What about RAMS and site documents?

Each site asks for different documents, so list what you need, whether RAMS, insurance or CSCS details, and we’ll confirm with the quote.

What if there’s asbestos in the old mastic?

Some older mastics, especially in pre-2000 buildings, can contain asbestos. We check the asbestos register before cutting out old sealant in an older building, and work stops until any suspect material has been tested. We don’t remove asbestos-containing materials.

How long before the joints can be used?

The product and site conditions decide that. Some products skin over quickly but need longer to cure fully, and we confirm it before leaving site.

Why deal with it now?

Spot repairs can be useful on a tight budget. But if the rest of the run is the same age and product, it’s normally not far behind. Where it helps, we quote both options. Scottish city buildings take plenty of rain, so a split or hardened joint lets water into the wall. Resealing promptly protects the stone and the interior.

Small jobs and large programmes are priced from the same things: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote and we’ll put a fixed figure on it.

Why us?

  • Colours confirmed for the specified product
  • Workmanship guaranteed for 12 months
  • A Constructionline member, so easy to vet
  • One number for every site we cover

Read what affects the cost and our accreditations.

Accreditations

Trusted. Accredited. Insured.