New Byth expansion joint sealing
Expansion and movement joint sealing in walls, decks and floors in New Byth. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- New sealant over old, now failing
- Hardened, cracked sealant on exposed facades
- Expansion joints filled with dirt and stones
Expansion joint sealing near New Byth
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Expansion joint sealing in New Byth, done properly
For movement joints in New Byth, photos and approximate lengths are the best start. We will come and look where photographs don’t show enough. You can also call the office on 01277 525 020 or email the details over to talk the joints through. We work on podiums and floor movement joints, brickwork movement joints and car park decks and ramps, and the usual reasons a site gets in touch are damp inside where a wall movement joint has failed and sealant peeling off one face of the joint. For commercial sealant work in New Byth, you deal with one contact from quote to sign-off, whether it’s one building or several.
In smaller places such as New Byth, the joints we’re asked about sit in workshops, farm sheds, schools and halls. Slabs and yards take vehicles, rain and frost.
Our workmanship is guaranteed for 12 months, wherever the site is. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Place
- New Byth (AB53)
- Wider area
- Aberdeenshire
- Cover
- 12 months on every job
- Quote
- A fixed quote before we start
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
From enquiry to sign-off
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Any old material is cut back to clean, sound faces, primer goes on where the manufacturer specifies it, and the sealant is tooled off neatly. For a building near New Byth, directions, keys and a contact on the day are worth sorting early. That goes into the plan alongside the quote.
- The first job is to check each joint: how wide it is, how it moves and why the old seal let go.
- A fixed quote follows, naming the sealant and its movement class.
- Old sealant and filler are cut out and the joint faces cleaned back to sound material.
- Closed-cell backing rod is set to depth, or bond-breaker tape in shallow joints.
- After any primer the maker requires, the bead is applied and tooled so it grips two sides only.
- Each joint is inspected and handed over with our 12-month guarantee.
Preparing the site
- Flag any permit to work we will need
- Agree which areas must stay open
- Arrange parking or a loading space
Quotes
Every quote starts with the facts: the joints involved, quantities, access and the product called for. Send what you have, and we will arrange a site visit if anything is unclear.
Related advice
Common questions from New Byth clients
Which documents can you supply for work in New Byth?
We’ll confirm the paperwork you need, such as RAMS, our insurance certificate and CSCS details, with the quote. We hold £5m public liability insurance, are CHAS accredited and a Constructionline member, and our applicators are CSCS-carded.
Must our site in New Byth stop work while the joints are done?
Rarely. Work is phased around your operations. The phasing plan comes with the quote.
What hours do you work?
The office is staffed Monday to Friday, from 8am until 5pm. Tell us your site hours and access windows and the work will be fitted around them.
Can staff carry on working while you are here?
Yes, with some planning. We agree a sequence with your contact so just one area at a time is disrupted.
Do you use silicone or polyurethane in movement joints?
The specification comes first, then the joint’s movement and exposure. The quote states the sealant and its movement class.
Do your applicators hold CSCS cards?
Yes. We use CSCS-carded applicators.
Will you come and look before quoting?
Photos, drawings or a schedule are often enough to quote. If the job needs a look first, we’ll arrange a visit before quoting.
Towns and villages near New Byth
Also in New Byth
When something else is needed
Being straight saves everyone time. Fresh joints won’t solve:
- Failed waterproofing membranes on podiums, roofs or decks (a waterproofing specialist’s job)
- Crumbling edges that would give a new bead nothing sound to grip
- A joint that has to be widened or re-detailed before it can work
If in doubt, phone 01277 525 020 or email us and we’ll say what we think.
Where we work in New Byth
- Precast concrete panel joints
- Car park decks and ramps
- Podiums and floor movement joints
- Blockwork control joints
- Brickwork movement joints
- Cladding panel joints
Work for main contractors and building owners
If you look after buildings for someone else, you need clear quotes and clear reporting. You get a fixed quote, an agreed scope and a walk round at the end.
We take on planned maintenance as well as one-off repairs: resealing failed joints building by building, on a schedule that suits your budget. New Byth can form part of a wider programme.
General trades versus a specialist
Using site staff can make sense for a small touch-up, but anything bigger is another matter: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and we’ll confirm the paperwork you need with the quote.
What affects the price in New Byth
Before we quote, we look at:
- The total length or number of joints
- Induction, permit and paperwork requirements
- The product specified
- Any access equipment needed
Access often affects the price as much as the sealing: easy-to-reach joints are quicker than those that need equipment to get to. Mention the access as part of your enquiry.
What we need to price the job
To price the job accurately, we need to understand the site. Send us:
- Drawings or a marked-up plan, if available
- A wide shot and a close-up of the area
- Where the site is, with the postcode
- Asbestos survey details if the building is older
Let us know the site, the scope and your timescale, and a fixed quote will follow. To get it moving, give us a call on 01277 525 020 or use the quote form.
Aftercare for building managers
Regular inspection catches problems early. In particular:
- Record the sealant used and the date in the O&M file
- Keep traffic off new joints until the cure time is up
- Include every elevation and deck joint in periodic inspections
- Act on the first tear or lifting edge rather than waiting
Movement joints belong on the planned maintenance inspection list. Early splits and edges starting to lift show up on a routine check. If anything looks wrong, call the office on 01277 525 020 or email drawings and photos with photos.
Unsupported floor joint edges spall under forklift and pallet-truck wheels. Broken arrises jolt trucks, loads and drivers. Sealing early protects the edges.
Expansion joint sealing around New Byth: what changes locally
Being in the east of Scotland, New Byth gets less rain than the west coast. Freezing weather and salt still attack open external joints. Autumn is a sensible time to seal them.
Around New Byth, open joints collect water and debris, and the arrises are the next to go. In and around New Byth, the right filler or sealant for each joint depends on the traffic and the movement it takes.
New Byth is about 13 miles south-west of Fraserburgh, in Aberdeenshire. We cover New Byth and the rest of Aberdeenshire, with the same fixed quotes and 12-month guarantee as everywhere else. New Byth is one of 179 places we cover in Aberdeenshire for movement joints. We also cover Aberdeen, some 30 miles away.
We cover the AB53 postcode districts. We cover commercial and managed buildings on Main Street, Chapel Lane and Bridge Street. If your building is just outside New Byth, we cover Garmond (1 mile south-west), Cuminestown (2 miles south-west), New Pitsligo (4 miles east), Turfhill (5 miles south-east) and New Deer (6 miles south-east). A short drive away, we cover Fraserburgh (13 miles north-east), Banff (11 miles north-west), Macduff (10 miles north-west), Mintlaw (11 miles east), Broadsea (13 miles north-east) and Rosehearty (11 miles north-east). Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so give the site location in your enquiry.
Landmarks near New Byth
A little further out are Craigston Castle (3.8 miles west). Not far away are Glasslaw Loch.