Expansion and movement joint sealing in Mount Pleasant, Hampshire
Expansion joint sealing in Mount Pleasant, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.
- Expansion joints split through the centre of the bead
- Weathered movement joint sealant that no longer flexes
- Sealant pulling off the joint face
Expansion joint sealing in Mount Pleasant
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
What happens if it’s left?
A torn seal left alone typically gets worse. Water and debris get in, the joint jams and the edges spall. Resealing early keeps the work to sealant. For buildings around smaller places like Mount Pleasant, water damage can go unnoticed for longer, especially where a building isn’t used daily, which gives a failed joint time to do damage. Renewing joints in good time avoids the problem.
Whether it’s a single area or a whole estate, the same things set the price: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote, and you’ll have a fixed figure to work with.
What you get with us
- One number for every site we cover
- Failed material removed, not covered up
- Work carried out by CSCS-carded applicators
- Workmanship guaranteed for 12 months
See how commercial sealant jobs are priced or our accreditations and insurance.
How we handle expansion joint sealing in Mount Pleasant
Joint design counts for as much as the sealant itself. The joint has to be wide enough for the expected movement and the sealant’s movement capability while depth is limited by backing rod or, in shallow joints, a bond-breaker. For wider joints, many sealant makers recommend a width-to-depth ratio, often around 2:1, and the bead is tooled so it grips the two faces alone. If you are dealing with damp inside where a wall movement joint has failed and expansion joints split through the centre of the bead, we can put it right, whatever the surface. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in Mount Pleasant, preparation and product choice get the time they need.
Jobs around smaller places like Mount Pleasant are planned so the whole job is done in one visit, with the right materials on hand. Tell us the joint widths if you can, and what drives or walks over them.
Building owners and contractors get the same cover: a 12-month guarantee on our workmanship. It doesn’t extend to damage, faults in the building or work by others, and we’re upfront about that.
- Where
- Mount Pleasant (SO41)
- Region
- Hampshire
- Cover
- 12 months on our workmanship
- Price
- Quoted before any work starts
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Joints that move: notes for Mount Pleasant
With the shore within about 3 miles, Mount Pleasant counts as a coastal location. Coastal yards and decks give their joints salt and wet weather to deal with, not just wheels, which is why split joints are worth sealing before the edges deteriorate. Mount Pleasant is in the South East, one of the UK’s drier regions. External joints still wait for dry conditions, and where de-icing salt is spread in winter, open joints let it in.
In a school such as Priestlands School, movement joints in brick, block and hall floors tend to be forgotten until they leak. Sites like Lymington New Forest Hospital (to the south-east of Mount Pleasant) carry ambulances, deliveries and visitors’ cars over their road and deck joints.
Mount Pleasant is about 2 miles north-west of Lymington, in Hampshire. Anywhere in SO41, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. Mount Pleasant is one of 723 places we cover in Hampshire for movement joints. Our Southampton page has more on work in that area (13 miles or so).
Work on movement joints is covered throughout SO41. We cover commercial and managed buildings on Mount Pleasant Lane and Kings Hyde and the roads nearby. Just outside Mount Pleasant, we also work in Battramsley (1 mile north-east), Boldre (1 mile east), Sandy Down (1 mile north-east), Warborne (2 miles east) and Lymington (2 miles south-east). Further afield, our area takes in Totton (10 miles north), Hedge End (15 miles north-east), Romsey (15 miles north), Hythe (10 miles north-east), New Milton (4 miles south-west) and Ringwood (10 miles north-west).
Landmarks near Mount Pleasant
Locally, jobs take us to sites close to The Hobler Public House, among other places. Mount Pleasant’s nearest station is Sway station, roughly 1.6 miles west. Other landmarks nearby include St Barbe Museum and Art Gallery (1.9 miles south-east) and Lymington New Forest Hospital (1.4 miles south-east). For a walk, there’s Milford on Sea LNR.
Places near Mount Pleasant
What else we do in Mount Pleasant
What the job involves on each surface
Concrete and precast panel joints
Precast panels often have surface residues that sealant won’t bond to. Proper cleaning and primer where specified give a sound bond, so the new seal holds.
Joints between different materials
Hybrid or MS polymer sealants bond to many substrates. We pick the product for the materials and the movement, and confirm it in the quote.
When something else is needed
Being straight saves everyone time. Fresh joints won’t solve:
- Damaged metal nosings or cover plates over a joint
- Crumbling edges that would give a new bead nothing sound to grip
- Waterproofing layers buried beneath the sealant
If in doubt, give us a call on 01277 525 020 or email a schedule or drawings and we’ll say what we think.
Joints and surfaces we work on
- Brickwork movement joints
- Precast concrete panel joints
- Podiums and floor movement joints
- Cladding panel joints
- Car park decks and ramps
- Blockwork control joints
General trades versus a specialist
Using site staff can make sense for a small touch-up, but larger jobs are different: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and our CSCS-carded applicators are used to working under those rules.
Your questions answered
Is Mount Pleasant too far out for you?
No. Small places get the same service as large ones. London and every South East county are within our area. Where we can, we group nearby jobs to make the most of each trip.
Does the sea air around Mount Pleasant change the choice of sealant?
It can. Driven rain and salt are tougher on outside sealant than sheltered inland conditions. We choose the product for the exposure, prime where the manufacturer requires it and size the joint for its movement.
What about RAMS and site documents?
Each site asks for different documents, so tell us what you need and we’ll confirm it when we quote.
Is colour matching possible?
Often, yes. Many products come in a range of standard colours, and matching to RAL references or surrounding finishes is often possible. We will confirm the colours available for the specified product.
Can you seal car park deck joints?
Yes. Tyre loads, grit and de-icing salts make these some of the hardest joints to keep sealed, and we’ll tell you if any edges need repairing first.
What timescale should we allow for resealing expansion joints?
Expect anything from part of a day to a couple of weeks, depending on joint lengths, widths and access. We’ll confirm when each area can be used again.
Do you have public liability insurance?
Yes. We’re fully insured, and the certificate can go with your quote.
Our process
At the end of each section, the masking comes off, the area is cleaned and every joint is checked with your site contact. If an area should be left alone while the sealant cures, we say how long and put signs out. Jobs in and around smaller places like Mount Pleasant are usually planned as a single visit, so we ask for photos and rough sizes first. That way the right products come on the day.
- First, the joints are inspected for width, movement and the type of failure.
- A fixed quote follows, naming the sealant and its movement class.
- The failed seal is removed and both faces are cleaned until sound and dry, flagging any broken edges that need repair before sealing.
- Closed-cell backing rod is set to depth, or bond-breaker tape in shallow joints.
- After any primer the maker requires, the bead is applied and tooled so it grips two sides only.
- Finished joints are checked and backed by our 12-month guarantee.
Getting the site ready
- Point out parking and an unloading spot
- Let us know about inductions and permits
- Share the asbestos register for older buildings
Request a quote
Photos, drawings or a schedule of the joints are often enough for a fixed quote. If the job needs a look first, we’ll arrange a site visit.
Related advice
For managing agents and facilities managers
As a CHAS accredited contractor and Constructionline member, we are straightforward to vet for your supplier list. We’re fully insured, and our insurance certificate can go with the quote.
Planned maintenance programmes are welcome: resealing failed joints building by building, on a schedule that suits your budget. Sites in Mount Pleasant can sit alongside others in a wider programme across Hampshire.