Pilley expansion joint sealing
Expansion and movement joint sealing in walls, decks and floors in Pilley. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- New sealant over old, now failing
- Leaks through car park deck joints onto the level below
- Weathered movement joint sealant that no longer flexes
Expansion joint sealing for Pilley sites
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Why it’s worth doing now in Pilley
Combining joint work with other maintenance reduces set-up costs. But joints already letting water in shouldn’t wait for a programme. Urgent joints now, the rest later, is often the sensible plan. One visit to deal with every failing joint makes more sense than several trips to a place like Pilley, rather than one at a time. Send photographs of each area and we will quote for the lot.
Access can matter as much as the joints themselves: joints within easy reach take less time than ones that need access equipment. Tell us how the joints are reached and call for a quote.
What you get with us
- Constructionline member
- Old sealant cut out, never sealed over
- Standard and matched colours in many product ranges
- Work to your specification and the manufacturer’s guidance
Read our cost guide and our accreditations.
How we handle expansion joint sealing in Pilley
Internal floor joints take trolleys, pallet trucks and forklifts. Unsupported edges break up under wheels. We will tell you if the edges need repairing before sealing, and phased work keeps areas in use. If you have water dripping through deck or ramp joints and joints packed with grit and debris, we can put it right. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: in Pilley, that means joint design, primers and backing rod as standard.
Jobs around smaller places like Pilley are planned so the whole job is done in one visit. Note joint widths and the traffic that uses them, and we will take it from there.
Every job is signed off with a 12-month guarantee. The promise is simple: if our work fails within that year, we put it right.
- Where
- Pilley (SO41)
- Wider area
- Hampshire
- Guarantee
- A 12-month guarantee
- Price
- A fixed quote before we start
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
How a job runs
Working in a building that stays open takes some planning. The work area is signed and kept contained, keep walkways clear and work section by section so the rest of the building stays in use. If others near Pilley need work, visits can be combined. You’ll have a fixed quote before work starts.
- We assess the joints on site or from photographs, noting widths and how each has failed.
- You receive a fixed quote stating the product and the movement it is rated for.
- Where areas have to stay open, we agree a phased sequence before starting.
- We strip the old sealant or filler and prepare each face until it’s sound and dry.
- Depth is controlled with backing, the faces are primed where the maker calls for it, then the bead is laid and tooled.
- We check each joint with you, confirm the cure time and sign off under our 12-month guarantee.
Getting the site ready
- Point out any areas we must not close
- Explain the parking and delivery arrangements
- Tell us your opening times and when work is allowed
Get a fixed quote
The quickest route to a quote is a few photos and the site postcode. Upload them with the quote form, or call 01277 525 020 or email a schedule or drawings to discuss it first.
Advice
Traffic, movement and joints around Pilley
Pilley is within about 2 miles of the coast. External movement joints in car parks, ramps and yards near the coast take salt and wind-driven rain on top of traffic, and edges left open tend to break up faster. Pilley sits in one of the drier corners of the country, the South East. Even so, yard and car park joints are only sealed when they’re dry and clean, and gritting in cold spells finds its way into open joints.
Hospital campuses such as Lymington New Forest Hospital, 1.1 miles south-west of Pilley, grow in stages, leaving movement joints wherever new blocks meet old.
Pilley is about 2 miles north of Lymington, in Hampshire. Across the SO41 postcode area, it works the same way: details in, fixed quote out, then sealing and a 12-month guarantee. Pilley is one of 723 places we cover in Hampshire. For work in that direction, see our Southampton page, about 11 miles away.
We cover the SO41 postcode districts. Buildings on Pilley Street, Burnt House Lane and May Lane are within our area for movement joints. Close to Pilley, our area also takes in Pilley Bailey (1 mile north-east), Warborne (1 mile south-west), Bull Hill (1 mile east), Portmore (1 mile south-east) and Boldre (1 mile west). A short drive away, we cover Eastleigh (15 miles north-east), Fareham (15 miles east), Totton (9 miles north), Chandler's Ford (15 miles north-east), Hedge End (14 miles north-east) and Romsey (15 miles north).
What’s near Pilley
We work on buildings around Priestlands School, The Red Lion Inn and Southlands School and the streets around them. Pilley’s nearest station is Lymington Town station, about 1.5 miles south. A little further out are St Barbe Museum and Art Gallery (1.7 miles south) and Lymington New Forest Hospital (1.1 miles south-west). The countryside around Pilley includes Boldre Foreshore.
What the job involves on each surface
Joints between different materials
Junctions between brick and render, or concrete and cladding, move independently. We choose a sealant that grips both faces, with primer where specified.
Internal floor movement joints
Wheeled traffic chips floor joint edges that aren’t supported. We match the product to the traffic and the movement flagging broken arrises before sealing.
Quoting for work in Pilley
Quotes vary with the job. Expect it to depend on:
- Removal of failed or old sealant
- Any access equipment needed
- Specialist products, such as fire-rated or hygienic sealants
- Phasing around occupants
What a job costs comes down to the quantity of joints, what has to come out first and how the joints are reached. Call for a fixed quote when you are ready.
Before you send an enquiry
However big the job, the same details help:
- Your programme or deadline
- Whether the building will be occupied during the work
- The postcode of the building
- Whether an asbestos survey exists
For a fixed quote, call 01277 525 020 or email drawings and photos. Our quote form is another easy route.
Nearby places to Pilley
More services for Pilley
Questions about Pilley
Is a smaller place like Pilley outside your area?
No. Small places get the same service as large ones. London and every South East county are within our area. We plan jobs in smaller places so return trips are kept to a minimum.
Can you work on a hospital site such as Lymington New Forest Hospital?
Yes. We work in healthcare settings as well as offices and schools. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Does the weather affect the work?
For external joints, yes. The joint has to be dry and within the product’s temperature range, so damp, frosty or very cold days can stop external work. Internal work is rarely affected.
When is resealing likely to be due?
There isn’t a single answer, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular checks let you plan resealing before leaks or damage.
Can you work while the building is occupied?
Yes, as long as we plan it. We agree a sequence with your contact so just one area at a time is disrupted.
How soon can the area be used again?
That comes down to the sealant and the temperature. Some take light use quickly, others need longer to cure, and we confirm it before leaving site.
Can you follow the specification on our project?
Yes. We follow the specification, along with the manufacturer’s installation guidance, and we raise anything unclear before work begins.
Common problems we fix in Pilley
With no backing rod or bond-breaker in place, sealant grips the base of the joint too. Bonded on three faces, it can’t stretch evenly when the joint opens so backing is set before sealing.
Clients normally get in touch after noticing something like this:
- Rain penetration at brick or block movement joints
- New sealant over old, now failing
- Expansion joints filled with dirt and stones
- Hardened, cracked sealant on exposed facades
In a school such as William Gilpin Church of England Primary School, movement joints in brick, block and hall floors tend to be forgotten until they leak.
What to look for in a quote
- How long is the guarantee, and what does it include?
- Is the sealant right for the movement and the substrate?
- Will failed sealant be removed rather than covered?
- Who will actually carry out the work
When something else is needed
Not every problem is a sealant problem, and we’d rather tell you before you spend money. It won’t fix:
- Structural movement beyond what the joints were designed for (that needs a structural engineer)
- Mechanical expansion joint covers, cover plates or proprietary joint systems (a specialist supplier’s job)
- Crumbling edges that would give a new bead nothing sound to grip
If in doubt, phone 01277 525 020 or email drawings and photos and we will say what we think.
Surfaces we seal
- Precast concrete panel joints
- Car park decks and ramps
- Cladding panel joints
- Blockwork control joints
- Brickwork movement joints
- Podiums and floor movement joints