Expansion joint sealing in Lower Hardres
Looking for expansion joint sealing in Lower Hardres? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Water dripping through deck or ramp joints
- Chipped joint edges on forklift routes
- Layers of sealant in a movement joint
Expansion joint sealing near Lower Hardres
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
How we handle expansion joint sealing in Lower Hardres
Width, depth and product all have to work together. The joint has to be wide enough for the expected movement and the sealant’s movement capability. For wider joints, the width-to-depth ratio is often around 2:1, as the manufacturer advises, and the bead is tooled so it grips the two faces alone. If you are dealing with car park joints leaking onto vehicles below and water getting into the wall through a failed joint, we can put it right, on brickwork movement joints, podiums and floor movement joints and precast concrete panel joints alike. Whoever orders the work in Lower Hardres, the brief is normally the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
For a site near Lower Hardres, measurements and photographs up front mean one trip where possible. Note joint widths and the traffic that uses them, and we’ll take it from there.
We stand by our work with a 12-month guarantee. It covers how we prepared and applied the sealant, and we come back if anything isn’t right.
- Location
- Lower Hardres (CT4)
- Region
- Kent
- Guarantee
- 12 months on every job
- Price
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Should maintenance staff do it?
Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
Using site staff can make sense for a small touch-up, but anything bigger is another matter: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
Lower Hardres: questions and answers
Can you work at a site such as Wincheap Industrial Estate, by Lower Hardres?
Yes, sites like Wincheap Industrial Estate are within our area, along with the rest of Lower Hardres. Send details of the unit and the work through our quote form for a quick quote.
Would you work within a site like The Chaucer Hospital?
Yes, provided the work is planned with the site’s estates team. Each area is agreed with the ward or department and the estates team in advance.
What about RAMS and site documents?
Let us know which documents the site needs, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm them with the quote.
What exactly is a movement joint?
They’re closely related. Both let materials grow and shrink with temperature, moisture and load while the sealant stops grit and water getting in.
Can you handle several sites?
Yes. We take on portfolio and planned maintenance work, with each site phased to suit its occupants.
Can you follow the specification on our project?
Yes. Send it with your enquiry, and the quote will be based on it, flagging anything that needs clarifying.
Will your applicators have CSCS cards?
Yes. Should the site need card details in advance, let us know and we’ll send them with the quote.
From enquiry to sign-off
Inspect, seal, sign off: that’s the shape of every visit. First comes an inspection and agreement on scope, then the work is carried out to the specified product and detail, and the job ends with a walk round and sign-off. Jobs in and around smaller places like Lower Hardres are normally planned as a single visit, so photos and measurements up front really help. That way the right products come on the day.
- We start with photographs, approximate lengths and any drawings, visiting where needed.
- Joint widths and expected movement are checked against what the sealant can take and tell you if the design looks wrong for the movement.
- Old sealant and debris are cut out of every joint.
- Any broken arrises or friable edges are flagged before work goes further.
- A sealant suited to the movement and traffic is laid to depth and tooled.
- Areas reopen once cured, and the work carries our 12-month guarantee.
Before we start on site
- Tell us what induction or permit system the site runs
- Send asbestos survey details if the building is pre-2000
- Tell us your opening times and when work is allowed
Quotes
To get a fixed quote, ring 01277 525 020 or email us. Our quote form is another easy route.
Related advice
How the job changes by surface
Concrete and precast panel joints
Precast and concrete panel joints move daily. The sealant needs the right movement capability and a controlled depth.
Brickwork and blockwork joints
Mortar snots and debris in the joint stop it working. Everything is raked out before backing and sealant go in, and tell you if the joint looks too narrow for the movement.
Places near Lower Hardres
Also in Lower Hardres
Aftercare for building managers
Cleaning and maintenance staff play a part too. Share these points with them:
- Brief car park operatives to protect joint lines during winter clearance
- Check joints after long freezing spells
- Record the sealant used and the date in the O&M file
- Sweep decks, ramps and floors so grit doesn’t collect in the joints
On car parks, winter clearance can damage deck joint sealant. Lifting the blade at each joint avoids tearing the bead and a look at the joints after winter catches any damage.
External wall joints that fail let rain into the masonry and cavity. The first sign is often a damp patch indoors. Resealing promptly prevents internal damage.
Warehouse floors and decks around Lower Hardres
Lower Hardres lies roughly 54 miles out from central London. Distribution warehouses and industrial estates are common around the motorway corridors that serve the capital. Rainfall across the South East, Lower Hardres included, is lower than in many parts of the UK. External slab and deck joints still need a dry, clean joint to seal, and winter de-icing salt on car parks and ramps works into any open joint.
For a centre such as Whitefriars Shopping Centre, 2.9 miles north of Lower Hardres, the service yard and car park joints usually need attention first. Another example is Stour Valley Business Park, 2.8 miles to the north-west of Lower Hardres, where floors and yards would be done in stages around the occupiers. If you manage units on an estate such as Wincheap Industrial Estate, which lies north of Lower Hardres, the floor joints under forklifts and pallet trucks and the slab joints in the yard are the ones to watch.
Lower Hardres is about 3 miles south of Canterbury, in Kent. We cover Lower Hardres, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Lower Hardres is one of 931 places we cover in Kent. We also cover London, some 54 miles away.
Work on movement joints is covered throughout CT4, for business premises of every kind. Close to Lower Hardres, our area also takes in Street End (1 mile north), Pett Bottom (1 mile south-east), Nackington (1 mile north), Upper Hardres (1 mile south) and Petham (2 miles south-west). Further afield, our area takes in Ashford (11 miles south-west), Canterbury (3 miles north), Dover (12 miles south-east), Folkestone (11 miles south), Whitstable (8 miles north) and Deal (14 miles east).
Local landmarks in Lower Hardres
Around Lower Hardres, our work takes us to commercial buildings near The Duck pub and the streets around them. For rail, the closest station is Canterbury East station, about 2.7 miles north of the centre. Other landmarks nearby include Kent and Canterbury Hospital (2.2 miles north) and Whitefriars Shopping Centre (2.9 miles north). Green spaces nearby include Blean Woods RSPB Reserve.
Work for main contractors and building owners
When you manage a building on behalf of an owner, clear figures and clear communication matter. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative, plus a 12-month guarantee.
Whether you’re a managing agent, a property factor or an owner’s representative: send details, get a fixed quote, we seal, guaranteed. We can agree access arrangements and keyholder contacts beforehand.
What sets the cost
Sealant work doesn’t have a standard rate, because every site is different. What we take into account:
- How much existing material needs removing
- Site requirements such as inductions and permits
- Quantities, in metres or numbers
- Joint width, depth and condition
No two sites price the same: joint size, product, access and site hours all play a part. Send the details and a fixed figure follows.
What we need to price the job
A good diagnosis starts with the right details. Let us know:
- Whether an asbestos survey exists
- Clear photographs of the problem areas
- Approximate linear metres or a joint schedule
- Anything awkward about access or site hours
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to call 01277 525 020 or email us with what you know.