Kirktown of Fetteresso expansion joint sealing
Expansion and movement joint sealing in walls, decks and floors in Kirktown of Fetteresso and across Aberdeenshire. CHAS accredited and fully insured, with a 12-month guarantee.
- Water dripping through deck or ramp joints
- New sealant over old, now failing
- Sealant pulling off the joint face
Expansion joint sealing for Kirktown of Fetteresso sites
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Expansion joint sealing in Kirktown of Fetteresso, done properly
Few joints take as much punishment as those in a car park. Tyres load the edges, and de-icing salts and water work into any gap; water dripping through to the deck below is often the first sign. We reseal deck and ramp joints with a trafficable sealant chosen for the movement, phasing bays so the car park can stay in use. If you have car park joints leaking onto vehicles below and torn sealant in brick or block movement joints, we can help, whatever the surface. For commercial sealant work in Kirktown of Fetteresso, you deal with one contact from quote to sign-off, whether it’s one building or several.
Around smaller Scottish places like Kirktown of Fetteresso, slabs needing attention are often in agricultural buildings, workshops, schools and hotels. Slabs and yards take vehicles, rain and frost.
Our workmanship is guaranteed for 12 months. If our installation lets you down in that time, we return and fix it.
- Place
- Kirktown of Fetteresso (AB39)
- Wider area
- Aberdeenshire
- Guarantee
- 12 months on our workmanship
- Quotes
- A fixed quote before we start
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Where floor joints take the most wear near Kirktown of Fetteresso
Kirktown of Fetteresso is within about 2 miles of the coast. External movement joints in car parks, ramps and yards near the coast take salt and wind-driven rain on top of traffic, which is why split joints are worth sealing before the edges deteriorate. Two named trading, business or retail sites lie within about 3 miles of Kirktown of Fetteresso. Sites like these are full of saw-cut floor joints, yard slabs and car park joints.
At places like Arduthie Business Centre, which lies east of Kirktown of Fetteresso, joints are sealed a section at a time so operations carry on. Estates like Spurryhillock Industrial Estate (to the east of Kirktown of Fetteresso) combine warehouse slabs, yards and loading bays, all with joints under wheels.
Kirktown of Fetteresso is about 14 miles south of Aberdeen, in Aberdeenshire. Anywhere in AB39, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. Kirktown of Fetteresso is one of 179 places we cover in Aberdeenshire. Aberdeen is covered too, around 14 miles from Kirktown of Fetteresso.
Business premises anywhere in AB39 are within our area for movement joints. If your site is on Broomhill Avenue, Broomhill Road and Broomhill Crescent or close by, we can quote for movement joints. Sites close to Kirktown of Fetteresso are covered too, including Stonehaven (1 mile east), Redcloak (1 mile north), Cowie (2 miles east), Glithno (2 miles north) and Rickarton (3 miles north-west). Bigger towns within reach include Westhill (13 miles north), Banchory (11 miles north-west), Portlethen (8 miles north-east), Laurencekirk (12 miles south-west), Newtonhill (6 miles north-east) and Inverbervie (8 miles south).
Near you in Kirktown of Fetteresso
Kirktown of Fetteresso’s nearest station is Stonehaven station, about 0.7 miles east. Nearby you will also find Kincardine Community Hospital (0.6 miles north-east) and Fetteresso Castle (0.7 miles west). Open spaces near Kirktown of Fetteresso include Megray Hill.
Places near Kirktown of Fetteresso
Other services in Kirktown of Fetteresso
On site: what to expect
Tell us your site hours and access windows and we’ll plan around them. While we’re working, the area stays contained and tidy, and your contact hears from us before we move to the next area. Jobs near Kirktown of Fetteresso are often grouped with others in the same area. Let us know if your dates have any give.
- We assess the joints on site or from photos, noting widths and how each has failed.
- You receive a fixed quote stating the product and the movement it is rated for.
- Phasing is agreed so decks, floors or entrances can stay in use where needed.
- The failed seal is cut out and both joint faces cleaned back to sound material.
- Depth is controlled with backing, the faces are primed where the maker calls for it, then the bead is laid and tooled.
- Finished joints are inspected, the cure time confirmed and the 12-month guarantee applies.
Getting the site ready
- Send asbestos survey details if the building is pre-2000
- Tell us your opening times and when work is allowed
- Tell us what induction or permit system the site runs
Get a fixed quote
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, call the office on 01277 525 020 or email a schedule or drawings.
Related advice
FAQs: Kirktown of Fetteresso
Is Spurryhillock Industrial Estate, near Kirktown of Fetteresso, within your area?
Yes. We cover Kirktown of Fetteresso and the area around it, including industrial estates, business parks and retail parks such as Spurryhillock Industrial Estate. Send details of the unit and the work through our quote form for a quick quote.
Does a coastal location like Kirktown of Fetteresso affect which sealant is used?
It can. Driven rain and salt are tougher on outside sealant than sheltered inland conditions. Product choice and preparation matter more, and sea-facing elevations are worth inspecting more often.
What sealant do you use in movement joints?
The specification comes first, then the joint’s movement and exposure. The quote states the sealant and its movement class.
What’s the quickest route to a quote?
It works in four steps: send details, get a quote, we seal, guaranteed. The first step only needs photos and a postcode.
Will you come and look before quoting?
That depends on the size and complexity of the job. Straightforward work can often be priced from photos and measurements, while larger or less clear jobs get a site visit first.
When is resealing likely to be due?
It depends on movement, UV and weather, cleaning, traffic and the product. Sealant joints are maintenance items, so inspect them regularly.
Can a joint be sealed if the edges are broken?
Broken arrises have to be put right before resealing, and we’ll point out where that’s the case. Sealing over them leads to early failure.
Doing it in-house
The visible bead is only part of the job. Backing rod, primer where specified and a joint designed to move with the building are easy to get wrong without experience.
Redoing a failed joint normally costs more than getting it right at the outset, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.
Surface by surface
Brickwork and blockwork joints
Brick and block edges need careful preparation. Faces are prepared and primed wherever the sealant maker calls for it before the bead goes in.
Joints between different materials
Some mixed-material joints suit a hybrid sealant. The choice depends on the substrates and how much the joint moves, and confirm it in the quote.
What sealant work can’t fix
Not every problem is a sealant problem, and we’d rather tell you before you spend money. These need a different solution:
- Failed waterproofing membranes on podiums, roofs or decks (a waterproofing specialist’s job)
- A joint that has to be widened or re-detailed before it can work
- Crumbling edges that would give a new bead nothing sound to grip
If in doubt, call the office on 01277 525 020 or email the details over and we will say what we think before you book.
Joints and surfaces we work on
- Cladding panel joints
- Precast concrete panel joints
- Podiums and floor movement joints
- Blockwork control joints
- Car park decks and ramps
- Brickwork movement joints
When to call us in Kirktown of Fetteresso
Repeated failure often traces back to the wrong product. Products not classed for the movement fail early. BS EN ISO 11600 classifies building sealants by movement capability.
Common reasons buildings call us in:
- Arrises breaking up along floor joints
- Debris jammed in movement joints
- Car park joints leaking onto vehicles below
- Rain penetration at brick or block movement joints
For a school such as Mackie Academy, playground and building joints can be done in the holidays.
Comparing quotes
- Whether their applicators hold CSCS cards
- Do they follow the manufacturer’s priming guidance?
- Which product they’ll use, and why it suits the joint
- Will RAMS and insurance details be available?
After the work
To get the most from the new sealant:
- Check joints after long freezing spells
- Include every elevation and deck joint in periodic inspections
- Raise snow-clearing blades over deck joints where possible
- Keep product details with the building records for the next reseal
Floor joints on main traffic routes need watching more closely than the rest. Keep racking feet and heavy point loads off joint lines and flag chipped arrises before they spread.
Joints sealed at the same time generally fail around the same time. It pays to check every joint, not just the obvious one. We can suggest an order, worst joints first.