Expansion and movement joint sealing in Kent Street, East Sussex
Expansion and movement joint sealing in walls, decks and floors across Kent Street, carried out by CSCS-carded applicators. CHAS accredited and fully insured.
- Previous reseals laid over old sealant
- Sealant pulling off the joint face
- Rain penetration at brick or block movement joints
Expansion joint sealing in Kent Street
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
What happens if it’s left?
Re-sealing with the same product that failed is often a false economy. If the joint is too narrow or the product wrong for the movement, it needs a different approach and we’ll tell you honestly. Older rural buildings around Kent Street move with the seasons, and rigid or tired sealant can’t keep up. A sealant with the right movement capability, correctly sized, lasts far better.
The specified product makes a difference, as does the preparation each joint needs, from cutting out to priming and backing rod. Access, phasing and site rules also count.
Why clients in Kent Street choose us
- CSCS-carded applicators
- Old sealant cut out, never sealed over
- Colours chosen to suit frames, cladding or finishes where possible
- A Constructionline member, so easy to vet
Read what affects the cost or our accreditations.
Expansion joint sealing in Kent Street, done properly
Buildings and slabs are never completely still: they expand in the heat, shrink as they dry, and shift under load. Expansion and movement joints are built in so the structure can move without cracking and the seal across each one keeps out water and grit. We seal and reseal movement joints in walls, panels, decks and floors for buildings in Kent Street. Most enquiries involve brittle, chalky sealant on external joints and debris jammed in movement joints, across precast concrete panel joints, brickwork movement joints and car park decks and ramps. Searching for sealant specialists in Kent Street? Mastic Doctor has worked for contractors, FMs and building owners since 2005, with CSCS-carded applicators.
Jobs around smaller places like Kent Street are planned so the whole job is done in one visit. Tell us the joint widths if you can, and what drives or walks over them.
A 12-month guarantee applies to all our work. If an installation problem shows up, ring 01277 525 020 or send details through our quote form and we will arrange a return visit.
- Where
- Kent Street (TN33)
- Wider area
- East Sussex
- Guarantee
- A 12-month guarantee
- Quotes
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Places near Kent Street
Other services in Kent Street
Keeping the joints sound
To get the most from the new sealant:
- Avoid parking heavy plant or pallets on joint lines
- Clear dirt from joint lines during routine cleaning
- Keep traffic off new joints until the cure time is up
- Check joints after long freezing spells
In warehouses, forklift and pallet-truck routes take the most wear. Avoid standing heavy loads or racking legs on the joints and flag chipped arrises before they spread.
Rain gets into walls through torn brick and block movement joints. It can surface inside as damp a long way from the joint. Resealing promptly prevents internal damage.
FAQs: Kent Street
Is Wheel Farm Business Park, near Kent Street, within your area?
Yes, sites like Wheel Farm Business Park are within our area, along with the rest of Kent Street. A few photographs and the unit address let us price the work.
Is Kent Street off your patch?
No. Places such as Kent Street are covered as much as the big towns. London and every South East county are within our area. Where we can, we group nearby jobs to make the most of each trip.
Do your applicators hold CSCS cards?
Yes. If you need card details for site access, let us know and we’ll send them with the quote.
How do you deal with asbestos in old sealant?
The duty to manage asbestos sits with the building’s dutyholder, so for older buildings we ask for the asbestos register first. If anything suspect turns up, we stop until it’s tested.
Are expansion joints and movement joints the same thing?
They’re closely related. Both let materials grow and shrink with temperature, moisture and load, and the seal across it keeps water and debris out.
Does the weather affect joint sealing?
The joint has to be dry, and the air and surface temperature inside the product’s limits. Cold, damp or frosty mornings can stop work outside so external dates keep some flexibility.
Do you offer coloured sealant?
That depends on the product specified. Some ranges are wide, others limited, so the available colours are confirmed with the quote.
Traffic, movement and joints around Kent Street
At least three named trading, business or retail sites lie within about 3 miles of Kent Street. Their warehouses, yards and car parks are exactly where joints take the most punishment. Kent Street lies roughly 49 miles out from central London. Distribution warehouses and industrial estates are common around the motorway corridors that serve the capital.
On a site such as Wheel Farm Business Park, 1 mile to the east of Kent Street, the movement joints are in car park slabs, paving and building elevations. For a centre such as Hastings Retail Park, which lies south of Kent Street, the service yard and car park joints usually need attention first. Sites like Conquest Hospital (to the south-east of Kent Street) carry ambulances, deliveries and visitors’ cars over their road and deck joints.
Kent Street is about 3 miles north of Hastings, in East Sussex. We cover commercial sites throughout Kent Street, for single jobs and planned programmes alike. Kent Street is one of 308 places in East Sussex on our list for movement joints. For work in that direction, see our Brighton page, about 30 miles away.
Commercial sites across TN33 are covered for movement joints. If your building is just outside Kent Street, we cover Westfield (1 mile east), Telham (2 miles west), Sedlescombe (2 miles north), Whatlington (2 miles north-west) and Brede (3 miles north-east). A short drive away, we cover Eastbourne (14 miles south-west), Hastings (3 miles south), Bexhill-on-Sea (6 miles south-west), Hailsham (13 miles west), St Leonards (4 miles south) and Polegate (14 miles south-west).
Around Kent Street
The closest station to Kent Street is Battle station, roughly 2.2 miles west. A little further out are Hastings Castle (4.3 miles south-east) and Conquest Hospital (2.2 miles south-east). The countryside around Kent Street includes Senlac Hill and Church Wood and Robsack Wood.
From enquiry to sign-off
Working in a building that stays open takes some planning. We sign and contain the area we are in, with routes through the building left open and move on in phases so staff and visitors can carry on around us. For work around Kent Street, we aim to finish in one visit, so photos and measurements up front really help. That way the right products come on the day.
- Photos, joint lengths and drawings come to us, or we visit.
- Joint widths and expected movement are checked against what the sealant can take and tell you if the design looks wrong for the movement.
- Every joint is cleared of the failed seal and any grit packed into it.
- Edges are checked, and we tell you if any need repairing before sealing.
- The right sealant goes in at the right depth, bonded to the two sides only.
- Each area is handed back after its cure time, under our 12-month guarantee.
Before we start on site
- Let us know about inductions and permits
- Have the specification and drawings to hand
- Share your working hours and any access restrictions
Ask for a quote
Send us photographs, drawings or a joint schedule are often enough for a fixed quote. Where a site visit makes more sense, we’ll arrange one.
Advice
When something else is needed
Being straight saves everyone time. New sealant won’t cure:
- Damaged metal nosings or cover plates over a joint
- Joints too narrow for the movement, which need redesigning by the engineer
- Concrete or masonry repairs along the arrises
If you’re not sure, just give us a call on 01277 525 020 or email us and we’ll give you a straight answer before you book.
Where we work in Kent Street
- Blockwork control joints
- Cladding panel joints
- Brickwork movement joints
- Podiums and floor movement joints
- Precast concrete panel joints
- Car park decks and ramps
For managing agents and facilities managers
Planned maintenance programmes are welcome: resealing failed joints building by building, on a schedule that suits your budget. Sites in Kent Street can sit alongside others in a wider programme.
If you look after buildings for someone else, you need clear quotes and clear reporting. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative.
What the job involves on each surface
Cladding panel joints
Access to cladding joints is agreed before the price is fixed. Close-up photos help us judge the joints, or we visit if they don’t show enough.
Car park decks and ramps
Water coming through deck joints is the usual first sign. The old seal comes out, the edges are prepared and the joint resealed.