Expansion joint sealing in Polegate
Expansion and movement joint sealing in walls, decks and floors throughout Polegate and nearby, by CSCS-carded applicators. Fully insured and CHAS accredited.
- Leaks through car park deck joints onto the level below
- Weathered movement joint sealant that no longer flexes
- Sealant peeling off one face of the joint
Expansion joint sealing for Polegate sites
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Joints that move: notes for Polegate
Polegate is about 49 miles from central London. The South East has large numbers of industrial estates and warehouses along the motorway corridors. Polegate sits in one of the drier corners of the country, the South East. Even so, yard and car park joints are only sealed when they’re dry and clean, and winter de-icing salt on car parks and ramps works into any open joint.
A healthcare site such as Eastbourne District General Hospital, 2.6 miles to the south of Polegate, depends on car parks, ramps and service yards whose joints take traffic all day. A campus such as University of Brighton Eastbourne Campus, 4.7 miles south of Polegate, has long runs of movement joint in its buildings, decks and paving.
Polegate is about 3 miles south of Hailsham, in East Sussex. Across the BN26 postcode area, it works the same way: details in, fixed quote out, then sealing and a 12-month guarantee. Polegate is one of 308 places in East Sussex on our list for movement joints. Sites around Brighton have their own page, roughly 17 miles from Polegate.
We cover the BN26 postcode districts for movement joints. For a building on Station Road, High Street and Church Road or nearby, send details and we’ll quote for movement joints. Being close to the A27 and A2270, Polegate is straightforward for us to reach. If your building is just outside Polegate, we cover Wannock (1 mile south-west), Lower Willingdon (1 mile south), Willingdon (1 mile south), Filching (2 miles south-west) and Folkington (2 miles west). Bigger towns within reach include Eastbourne (3 miles south-east), Hastings (14 miles east), Bexhill-on-Sea (10 miles east), Seaford (7 miles south-west), Lewes (11 miles west) and Hailsham (3 miles north).
Local landmarks in Polegate
Around Polegate, our work takes us to commercial buildings near Horse & Groom pub and Willingdon Community School and the streets around them. Polegate has its own railway station: Polegate station. Well-known places in the area include Burlough Castle (3.4 miles west) and Eastbourne District General Hospital (2.5 miles south). Green spaces nearby include Combe Hill.
Expansion joint sealing for commercial buildings in Polegate
If you need expansion joint sealing in Polegate, start with photos and joint lengths. We will come and look where photos don’t show enough. You can also call 01277 525 020 or email a schedule or drawings to talk the joints through. We work on podiums and floor movement joints, cladding panel joints and precast concrete panel joints, and what we’re called in for most is damp inside where a wall movement joint has failed and new sealant over old, now failing. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Polegate is the same: the right product in a properly prepared joint.
Rural business units around smaller places such as Polegate often have new slabs laid inside older buildings. Saw-cut and construction joints in those floors need the right filler or sealant for the forklifts and trolleys that use them.
Every job ends the same way: guaranteed. You get a 12-month guarantee on our workmanship, and the quote explains what it covers.
- Place
- Polegate (BN26)
- Region
- East Sussex
- Guarantee
- A 12-month guarantee
- Quote
- A fixed quote before we start
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
When to call us in Polegate
Sometimes the sealant holds but the substrate breaks away. If the edge of the joint is friable, the bond fails with it so edge repair has to come before resealing.
What tends to prompt an enquiry:
- Joints where the bead has lost adhesion
- Joints packed with grit and debris
- Water getting into the wall through a failed joint
- Car park joints leaking onto vehicles below
If you manage units on an estate such as Chaucer Industrial Estate, which lies east of Polegate, the floor joints under forklifts and pallet trucks and the slab joints in the yard are the ones to watch.
Comparing quotes
- Will RAMS and insurance details be available?
- What level of public liability insurance do they hold?
- How the joint faces will be prepared and primed
- How long is the guarantee, and what does it include?
Looking after the joints
Regular inspection catches problems early. Specifically:
- Keep product details with the building records for the next reseal
- Brief car park operatives to protect joint lines during winter clearance
- Look over external and deck joints after a hard winter
- Act on the first tear or lifting edge rather than waiting
Movement joints belong on the planned maintenance inspection list. A periodic look picks up tears and lifting before water gets in. If anything looks wrong, ring 01277 525 020 or email drawings and photos with photos.
On a multi-storey car park, a failed joint normally shows up as a leak onto the deck underneath. Salty water dripping through stains soffits and lands on parked vehicles and it can affect the structure over time. Resealing early limits the damage.
What happens if it’s left?
Closing a car park for a reseal is rarely an option. Work can be planned so parts of the deck stay open, compared with a full closure. Tell us what has to stay open and we will plan around it. Small buildings around Polegate suffer from failed joints as much as large ones. Early resealing avoids the damage that follows a leak.
The price depends on the quantity of joints, how much old material needs removing and the access. Call for a fixed quote once you have the details.
Why us?
- Over 20 years of commercial sealing
- A range of standard colours, depending on the product
- A fixed quote before work starts
- Colour options checked against the specified product
Take a look at what affects the cost and our accreditations and insurance.
How a job runs
We bring the products specified for the job, along with primers and backing rod. Joint faces are cleaned back to sound, dry surfaces, primer goes on where the manufacturer specifies it, and the sealant is tooled off neatly. Several jobs near Polegate can be grouped on one trip. Tell us your site hours and we will plan around them.
- First, the joints are inspected for width, movement and the type of failure.
- You get a fixed quote with the product and its movement capability stated.
- Old sealant and filler are cut out and the joint faces cleaned back to sound material.
- We control the depth with backing rod or, in shallow joints, bond-breaker tape.
- Where the maker calls for primer, it’s applied first, then the bead goes in and is tooled to a concave finish.
- We check every joint before sign-off, and the work carries our 12-month guarantee.
Before we start on site
- Arrange parking or a loading space
- Send asbestos survey details if the building is pre-2000
- Tell us which areas need to stay in use
Request a quote
Specifications, drawings and tender packages are welcome with any enquiry, and we will price the work to it. For smaller jobs, photos and a description will do.
Advice
How the job changes by surface
Car park decks and ramps
Deck and ramp joints take tyre loads, grit and de-icing salts. A trafficable sealant suited to the movement goes in.
Internal floor movement joints
Warehouse and retail floors have saw-cut induced joints and construction joints. A semi-rigid filler is common in trafficked industrial floors.
Nearby places to Polegate
What else we do in Polegate
Quoting for work in Polegate
These are the things that shape the price:
- Site requirements such as inductions and permits
- Distance, for remote addresses
- Joint width, depth and condition
- How accessible the joints are
Access often affects the price as much as the sealing: joints within easy reach take less time than ones that need access equipment. Mention the access as part of your enquiry.
Sending details for a quote
For an accurate fixed quote, we need a clear picture of the site. Send us:
- The postcode of the building
- The type of building and who uses it
- Anything awkward about access or site hours
- Approximate linear metres or a joint schedule
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Share whatever details you have and we will fill any gaps with a visit.
Common questions from Polegate clients
Is a hospital such as Eastbourne District General Hospital somewhere you can work?
Yes. We work in healthcare settings as well as offices and schools. Work is phased so departments keep running, under the site’s own rules.
Is a smaller place like Polegate outside your area?
No. Places such as Polegate are covered as much as the big towns. We cover Greater London and the counties of the South East. Good photographs up front let us bring everything on the first visit.
Can you work while the building is occupied?
Usually, yes. Phased work can be planned so areas stay in use.
What will the job cost?
We don’t publish prices, as every site differs. Send photographs or drawings and we will price it at a fixed figure.
What causes movement joint sealant to fail?
The common causes are poor preparation, three-sided adhesion, the wrong movement class and weathering. We diagnose which one it is before resealing, because the fix differs.
What exactly is a movement joint?
They’re closely related. A movement joint allows for expansion, contraction, shrinkage and loading while the sealant stops grit and water getting in.
Do you seal on top of existing sealant?
No. Overlaying old sealant is a frequent cause of early failure, so everything comes out first.