Expansion and movement joint sealing in Hunters Forstal, Kent
Sealant work in Hunters Forstal for main contractors, managing agents and facilities managers: expansion and movement joint sealing in walls, decks and floors, quoted at a fixed price.
- Damp inside where a wall movement joint has failed
- New sealant over old, now failing
- Movement joints with split or torn sealant
Need expansion joint sealing in Hunters Forstal?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
How we handle expansion joint sealing in Hunters Forstal
Internal floor joints take trolleys, pallet trucks and forklifts. Unsupported edges break up under wheels, so the right filler or sealant for the traffic and movement matters. If the arrises are already broken, we will say so before sealing, and phased work keeps areas in use. If you are dealing with sealant pulling off the joint face and brittle, chalky sealant on external joints, we can put it right, on brickwork movement joints, cladding panel joints and podiums and floor movement joints alike. Most enquiries from Hunters Forstal start with one failed joint and grow into a wider look at the building: we look at the rest while we are there and tell you what we find.
For a site near Hunters Forstal, measurements and photos up front mean one trip where possible. Note joint widths and the traffic that uses them, and we will take it from there.
The 12-month guarantee covers our workmanship: the preparation, the sealing and the tooling. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Place
- Hunters Forstal (CT6)
- Region
- Kent
- Cover
- 12 months on every job
- Quotes
- Quoted before any work starts
- Call
- 01277 525 020
- Updated
- 3 November 2026
Should maintenance staff do it?
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
The visible bead is only part of the job. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
What happens if it’s left?
A like-for-like reseal of a joint that keeps splitting rarely lasts. If the joint is too narrow or the product wrong for the movement, it needs a different approach and we will tell you honestly. Halls, stores and units around places like Hunters Forstal may not be checked every day, so a failed joint can leak for a while before anyone sees it. Renewing joints in good time avoids the problem.
Pricing movement joints depends on how many there are, their condition and the access. Ask us for a fixed quote.
Why choose Mastic Doctor in Hunters Forstal
- Standard and matched colours in many product ranges
- CHAS accredited contractor
- Work to your specification and the manufacturer’s guidance
- Work carried out by CSCS-carded applicators
Also near Hunters Forstal
Also in Hunters Forstal
What the job involves on each surface
Internal floor movement joints
Floor joints include saw-cut joints and construction joints. Trafficked floor joints often get a semi-rigid filler.
Brickwork and blockwork joints
A brick movement joint full of old mortar or debris can’t close. We clear the joint fully before sealing, and tell you if the joint looks too narrow for the movement.
Owners, agents and contractors
Facilities managers want contractors who arrive with the paperwork sorted. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we’ll confirm them with the quote.
Building owners and managing agents use us on sealant work across single buildings or whole portfolios around Hunters Forstal. One quote can cover more than one site, which keeps the paperwork simple.
Floors, slabs and movement joints in Hunters Forstal
Hunters Forstal lies within about 2 miles of the sea. Coastal yards and decks give their joints salt and wet weather to deal with, not just wheels, and edges left open tend to break up faster. Hunters Forstal is in the South East, one of the UK’s drier regions. Outside joints in yards and car parks still have to be dry before sealing, while winter salting gets into any joint left open.
For buildings at a park such as Eddington Business Park, 0.9 miles north-west of Hunters Forstal, brick and panel movement joints are easy to forget until one leaks. For a school such as Herne Church of England Infant School, playground and building joints can be done in the holidays. For an estate such as Queen Victoria Memorial Hospital, which lies north of Hunters Forstal, the joints in ramps, decks and long building elevations all need attention over time.
Hunters Forstal is about 1 mile south-east of Herne Bay, in Kent. Looking for expansion joint sealing in Hunters Forstal? We can help. We work across 931 places in Kent, from busy centres to rural villages. London is covered too, around 54 miles from Hunters Forstal.
Work on movement joints is covered throughout CT6, whatever the building. Among the streets we cover are Mill Lane, Kingsfield Road and Hunters Forstal Road. Close to Hunters Forstal, our area also takes in Broomfield (1 mile east), Herne (1 mile south-west), Herne Bay (1 mile north-west), Eddington (1 mile west) and Bullockstone (1 mile south-west). Further afield, our area takes in Canterbury (6 miles south-west), Margate (11 miles east), Ramsgate (12 miles east), Broadstairs (12 miles east), Whitstable (5 miles west) and Deal (15 miles south-east).
What’s near Hunters Forstal
Locally, jobs take us to sites close to Herne Bay High School, The Huntsman And Horn Public House and Curtis Wood, among other places. The nearest railway station is Herne Bay station, roughly 1.1 miles north-west of the centre. Nearby you will also find Whitstable and Tankerton Hospital (4 miles west) and Tankerton Castle (4.6 miles west). Not far away are West Blean and Thornden Woods.
From enquiry to sign-off
Diagnose, treat, sign off: every visit follows that pattern. We inspect the joints and confirm what’s in scope, then we prepare and seal each joint with the specified product, and we finish with a walk round so the work can be signed off. Smaller jobs around Hunters Forstal can be grouped with others nearby. You will have a fixed quote before work starts.
- Photos, joint lengths and drawings come to us, or we visit.
- We compare each joint’s width with the movement and the sealant’s capability and tell you if the design looks wrong for the movement.
- Old sealant and debris are cut out of every joint.
- Edges are checked, and we tell you if any need repairing before sealing.
- The right sealant goes in at the right depth, bonded to the two sides only.
- Each area is handed back after its cure time, under our 12-month guarantee.
Before we start on site
- Make sure the joints can be reached
- Point out any areas we must not close
- Send your site hours and access windows
Quotes
Send us photos, drawings or a joint schedule are often enough for a fixed quote. If the job needs a look first, we will arrange a site visit.
Related advice
Questions about Hunters Forstal
Can you work at a site such as Eddington Business Park, by Hunters Forstal?
Yes. Our area takes in Hunters Forstal and its surroundings, with estates and business parks such as Eddington Business Park included. Send details of the unit and the work through our quote form for a quick quote.
Is a hospital such as Queen Victoria Memorial Hospital somewhere you can work?
Yes, hospitals are one of the sectors we cover. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
Can you send site paperwork?
Requirements differ from site to site, so list what you need, whether RAMS, insurance or CSCS details, and we’ll confirm with the quote.
Who decides which product is used?
A specification, where there is one, decides it. If there isn’t one, it comes down to the joint: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
Can weather delay the job?
For external joints, yes. Sealant needs a dry joint and a temperature within the product’s range, so damp, frosty or very cold days can stop external work. Inside work is seldom held up.
Does the weather affect joint sealing?
The joint has to be dry, and the air and surface temperature inside the product’s limits. Frost, rain and condensation on steel or concrete can hold up external work.
Which product is best for expansion joints?
The specification comes first, then the joint’s movement and exposure. We name the proposed product in the quote so there are no surprises.
When it isn’t the sealant
Part of a good diagnosis is knowing where sealant stops. We’ll tell you if the real problem is any of the following:
- Broken or spalled joint edges, which need repairing before any sealant goes in
- Joints too narrow for the movement, which need redesigning by the engineer
- Damaged metal nosings or cover plates over a joint
Not sure which it is? You can call the office on 01277 525 020 or email a schedule or drawings and we’ll tell you honestly.
Joints and surfaces we work on
- Cladding panel joints
- Car park decks and ramps
- Podiums and floor movement joints
- Brickwork movement joints
- Precast concrete panel joints
- Blockwork control joints