Construction Mastic in Hunters Forstal
Mastic packages for new-build and refurbishment projects throughout Hunters Forstal and nearby, carried out by CSCS-carded applicators. Fully insured and CHAS accredited.
- Internal caulk splitting as the building dries out
- Sealant knocked or painted over by other trades
- Inconsistent sealant finishes from plot to plot
Construction mastic in Hunters Forstal
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Building and refurbishing in Hunters Forstal
The sea is no more than about 2 miles from Hunters Forstal. Coastal exposure means perimeter and cladding joints work harder than on an inland job, so we check the specified product suits the exposure before the first bead. Rainfall across the South East, Hunters Forstal included, is lower than in many parts of the UK. Even so, frost and condensation on steel and glass are common on winter mornings, so external mastic is timed for workable conditions and agreed with the site manager.
New wings at hospitals like Queen Victoria Memorial Hospital (0.7 miles north of Hunters Forstal) bring long runs of window and panel joints to seal. New units and refits on sites such as Eddington Business Park (to the north-west of Hunters Forstal) need their panel and perimeter joints sealed to the specification. For contractors at a school such as Herne Church of England Infant School, sealing has to be finished before term starts.
Hunters Forstal is about 1 mile south-east of Herne Bay, in Kent. Commercial clients in Hunters Forstal can call on us for mastic packages, as part of our coverage of Kent. Hunters Forstal is one of 931 places in Kent on our list. Sites around London have their own page, about 54 miles away.
We cover the CT6 postcode districts for mastic packages. Among the streets we cover are Mill Lane, Kingsfield Road and Hunters Forstal Road, and sites on any of them can send details for a fixed quote. We also cover Broomfield (1 mile east), Herne (1 mile south-west), Herne Bay (1 mile north-west), Eddington (1 mile west) and Bullockstone (1 mile south-west). A short drive away, we cover Canterbury (6 miles south-west), Margate (11 miles east), Ramsgate (12 miles east), Broadstairs (12 miles east), Whitstable (5 miles west) and Deal (15 miles south-east).
Landmarks near Hunters Forstal
Recent enquiries here include premises near Herne Bay High School, The Huntsman And Horn Public House and Curtis Wood, among other places. The closest station to Hunters Forstal is Herne Bay station, roughly 1.1 miles north-west of the centre. A little further out are Whitstable and Tankerton Hospital (4 miles west) and Tankerton Castle (4.6 miles west). Open spaces near Hunters Forstal include West Blean and Thornden Woods.
About our construction mastic in Hunters Forstal
Since 2005 we have worked alongside main contractors, developers and fit-out firms. Quantities come off the drawings, the sequence is agreed with the site manager and the work follows the trades. For construction mastic on a scheme in Hunters Forstal, send drawings through our quote form, or phone or email us to talk it through. If you have early adhesion failures on new external joints and a long mastic snag list close to completion, we can help, on floor and skirting junctions, cladding and panel joints and brick and block movement joints alike. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in Hunters Forstal, preparation and product choice get the time they need.
Construction in and around smaller places such as Hunters Forstal is often barn conversions, small groups of houses or extensions to halls and schools. Perimeters, facade joints and internal sealant all need doing properly, however small the scheme.
A 12-month guarantee applies to all our work in Kent. Should something we installed fail, phone 01277 525 020 or email the details over and we’ll come back to it.
- Where
- Hunters Forstal (CT6)
- Region
- Kent
- Guarantee
- A 12-month guarantee
- Price
- A fixed quote before we start
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Commercial clients in Hunters Forstal
Main contractors use us as their sealant subcontractor on new-build and refurbishment projects. Programme, specification and site rules come first, and our applicators hold CSCS cards.
Planned maintenance programmes are welcome: resealing failed joints building by building, on a schedule that suits your budget. Hunters Forstal can form part of a wider programme.
When something else is needed
Not every problem is a sealant problem, and we’d rather tell you before you spend money. It won’t fix:
- Faulty frames rather than failed sealant
- Frames fitted out of tolerance
- Joints damaged after sign-off by following trades
If in doubt, ring 01277 525 020 or send photos by email and we will say what we think.
What we seal
- Floor and skirting junctions
- Sanitary and kitchen joints
- Brick and block movement joints
- Window and door perimeters
- Internal decorators’ caulk
- Cladding and panel joints
Different surfaces, different methods
Internal decorators’ caulk
Caulking is often done in a hurry by whoever’s on site. Done properly, it saves decorators time and gives a clean line and reduces snags.
Fire-rated sealant where specified
Where the specification calls for fire-rated or intumescent sealant around service penetrations or linear gaps, we install it to the manufacturer’s tested detail. The design and sign-off of fire stopping sit with the designer, principal designer or fire engineer.
General trades versus a specialist
Certain joints really need a specialist: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.
For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
Your questions answered
Can you take on a job at a hospital such as Queen Victoria Memorial Hospital?
Yes, provided the work is planned with the site’s estates team. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
Is a smaller place like Hunters Forstal outside your area?
Not at all. Hunters Forstal is within our area. London and every South East county are within our area. We plan jobs in smaller places so return trips are kept to a minimum.
How many days will you need on site?
The duration is planned around your programme and the access we are given. We will give you an estimate of time on site when we quote.
How do you work with the site programme?
We work to your programme. Share the release dates and we’ll match our work to them, sealing as areas become ready.
Do you guarantee new-build sealant work?
It’s backed by our 12-month guarantee, covering how we sealed. Keeping other trades off finished joints prevents most problems.
When can you be on site?
We’re in the office from 8am until 5pm, Monday to Friday. Let us know your site hours and access windows, and the work will be planned around them.
How do you deal with asbestos in old sealant?
The duty to manage asbestos sits with the building’s dutyholder, so we’ll ask for the register before work on an older building. Work pauses if suspect material is found, until it has been tested.
Our process
Before any cutting starts, the area is protected: masking tape along the joint edges and sheeting over anything nearby. On site, the work usually takes whatever the programme allows, since the work follows the trades as areas are released, and our waste is bagged and taken away as we go. Smaller jobs around Hunters Forstal can be grouped with others nearby, which keeps travel down. A fixed quote is given before anything starts.
- We walk the site or review drawings to understand the package.
- You receive a fixed quote covering scope, products and sequence.
- Site paperwork is confirmed and our CSCS-carded applicators are inducted.
- We seal plot by plot or floor by floor in line with the programme.
- Any frame gaps or issues outside our scope are flagged to the site team.
- Final snagging is completed and the 12-month guarantee applies.
Before we start on site
- Confirm the product named in the specification
- Point out parking and an unloading spot
- Tell us which areas need to stay in use
Getting a fixed quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to call 01277 525 020 or email us with what you know.
Advice
What happens if it’s left?
Leaving mastic to whichever trade is fitting the element can look cheaper on paper. In practice it often means different standards, gaps in responsibility and snags nobody owns. One mastic subcontractor for the lot keeps it simple, with the same standard on every plot. One visit to deal with every failing joint makes more sense than several trips to a place like Hunters Forstal, rather than one at a time. Send photographs of each area and we’ll quote for the lot.
Cost follows what’s involved: stripping out, preparation, sealing, access and phasing. Call for a quote and we will explain how it’s made up.
What you get with us
- A fixed quote before work starts
- Standard and matched colours in many product ranges
- CHAS accredited
- Failed material removed, not covered up
Read our cost guide or our accreditations.