Expansion and movement joint sealing in Hollington, East Sussex
Looking for expansion joint sealing in Hollington? It’s simple: send details, get a quote, we seal, guaranteed.
- Rain penetration at brick or block movement joints
- Sealant peeling off one face of the joint
- Expansion joints split through the centre of the bead
Expansion joint sealing across Hollington
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Expansion joint sealing in Hollington
The seal is what lets a movement joint do its job. Once it fails, water, grit and debris get in; the joint jams, its edges take the load and the arrises spall. Dealt with early, it stays a sealant job rather than a concrete or masonry repair. If you are dealing with layers of sealant in a movement joint and debris jammed in movement joints, we can put it right. Looking for mastic applicators who cover Hollington? Mastic Doctor has worked for contractors, FMs and building owners since 2005, with CSCS-carded applicators.
Around places the size of Hollington, joints that need sealing tend to be in rural business units, farm buildings put to commercial use, schools and community buildings. Their slabs and walls still need movement joints that work.
We sign every job off with a 12-month guarantee. It’s a plain promise: if our work fails within that year, we put it right.
- Where
- Hollington (TN38, TN37, TN34)
- Wider area
- East Sussex
- Cover
- 12 months on every job
- Quotes
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Diagnose, treat, sign off
A typical day starts with protection: masking tape along the joint edges and sheeting over anything nearby. The work itself normally takes a day or so for a modest run of joints, and longer where decks, ramps or floors are done in phases, and our waste is bagged and taken away as we go. Work in places the size of Hollington is planned as a single visit where we can. Photos with rough sizes let us arrive with everything needed.
- We look at the joints, their width and how they’ve failed.
- You get a fixed quote with the product and its movement capability stated.
- Old sealant and filler are cut out and the joint faces cleaned back to sound material, and we tell you if any edges need repairing first.
- Closed-cell backing rod is set to depth, or bond-breaker tape in shallow joints.
- Where the maker calls for primer, it’s applied first, then the bead goes in and is tooled to a concave finish.
- Each joint is inspected and handed over with our 12-month guarantee.
What we need from you
- Explain the parking and delivery arrangements
- Let us know about inductions and permits
- Confirm the product named in the specification
Quotes
Tell us about the building, the joints and when you need the work done, and a fixed quote will follow. To get it moving, ring 01277 525 020 or send details through our quote form.
Read more
Surface by surface
Podium joints
On podiums, the joint can belong to a larger waterproofing detail. Where the specification calls for sealant, we reseal and flag it if the membrane looks like the source.
Internal floor movement joints
Warehouse and retail floors have saw-cut induced joints and construction joints. A semi-rigid filler is common in trafficked industrial floors, with a flexible sealant where movement is larger.
Expansion joint sealing in Hollington: the local picture
With the shore within about 2 miles, Hollington counts as a coastal location. External movement joints in car parks, ramps and yards near the coast take salt and wind-driven rain on top of traffic, and edges left open tend to break up faster. The South East is one of the drier parts of the UK. Even so, yard and car park joints are only sealed when they’re dry and clean, and where de-icing salt is spread in winter, open joints let it in.
Warehouse floors on estates like Ponswood Industrial Estate (to the south of Hollington) carry pallet trucks and forklifts over every saw-cut joint. Hospital campuses such as Conquest Hospital, 1.1 miles to the north-east of Hollington, grow in stages, leaving movement joints wherever new blocks meet old. In a school such as Hollington Primary Academy, movement joints in brick, block and hall floors tend to be forgotten until they leak.
Hollington is about 1 mile north-west of Hastings, in East Sussex. We cover commercial sites throughout Hollington, whether it’s a single job or part of a planned programme. Across East Sussex, 308 places are covered, including Hollington. For work in that direction, see our Brighton page.
We take on movement joints across the TN38, TN37 and TN34 postcode area, whatever the building. Buildings on Kent Road, Duke Road and Ford Road are within our area. Hollington sits on or close to the A21, which helps when planning parking and deliveries for the job. If your building is just outside Hollington, we cover Silverhill (1 mile south-east), Hastings (1 mile south-east), Baldslow (1 mile north), St Helen's (1 mile east) and St Leonards (1 mile south). A short drive away, we cover Eastbourne (13 miles south-west), Bexhill-on-Sea (4 miles south-west), Hailsham (13 miles west), Polegate (14 miles west), Old Town (14 miles south-west) and Heathfield (14 miles north-west).
What’s near Hollington
In Hollington, that means premises near William Parker Sports College, The Wishing Tree pub and Old Roar Gill and Coronation Wood. For rail, the closest station is St Leonards Warrior Square station, about 1.4 miles south. Other landmarks nearby include Hastings Castle (2.1 miles south-east) and Conquest Hospital (1.1 miles north-east). Open spaces near Hollington include Senlac Hill and Church Wood and Robsack Wood.
Why deal with it now?
Sealing over a failed movement joint is a common shortcut. A bead over the old seal can’t bond or flex. We cut out the old seal and prepare the faces every time. A failed joint lets water into a building whatever its size. Early resealing avoids the damage that follows a leak.
Quantities, awkward access and phased working all shape the price. Site requirements like inductions and permits play a part as well, along with the time of year for external work.
Why clients in Hollington choose us
- Colour options checked against the specified product
- Public liability insurance in place
- Sealing commercial buildings since 2005
- Matching to RAL references, product permitting
Take a look at what affects the cost and our accreditations.
Common questions from Hollington clients
Is a smaller place like Hollington outside your area?
No. Small places get the same service as large ones. Our area covers London and the South East counties. We plan jobs in smaller places so return trips are kept to a minimum.
Does the sea air around Hollington change the choice of sealant?
It can. Wind-driven rain and, closer to the shore, salt air are harder on external joints. We check the specified product suits the exposure and pay close attention to preparation.
Are you insured?
Yes. Our insurance certificate can be sent alongside the quote.
Can you fit around our working hours?
Give us your site hours and any access windows in your enquiry, and we will schedule the work to suit. Our office runs Monday to Friday, 8am until 5pm.
Is it fine to apply new sealant on top of old?
No. We cut the old material out and clean the joint back before sealing, since fresh sealant will not bond reliably to aged material.
What will the job cost?
We don’t publish prices, because every site is different. With photographs or drawings, we can give you a fixed quote.
Are you CHAS accredited?
Yes. CHAS accredited, Constructionline member, and our applicators hold CSCS cards.
Towns and villages near Hollington
Also in Hollington
Doing it in-house
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Looking after the joints
Every sealant joint needs some looking after, and their life depends on movement, exposure, cleaning and use. We suggest:
- Inspect movement joints alongside other routine building checks
- Avoid parking heavy plant or pallets on joint lines
- Keep scrapers and ploughs from dragging across joint sealant
- Sweep decks, ramps and floors so grit doesn’t collect in the joints
Movement joints belong on the planned maintenance inspection list. A periodic look picks up tears and lifting before water gets in, when they’re still cheap to deal with. Should you spot a problem, you can call the office on 01277 525 020 or email us and send a picture.
Rain gets into walls through torn brick and block movement joints. The first sign is often a damp patch indoors by which time the joint has been open for a while. Catching it early keeps the water outside.
What affects the price in Hollington
There’s no standard rate for sealant work, because every site is different. What we take into account:
- Specialist products, such as fire-rated or hygienic sealants
- Access and working height
- Working within restricted access windows
- Quantities, in metres or numbers
Small jobs and large programmes are priced from the same things: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote and we will put a fixed figure on it.
Details that help us quote
It doesn’t need to be a full survey. These details are enough to start:
- Drawings or a marked-up plan, if available
- Whether the building will be occupied during the work
- When you need the work done
- The asbestos register, for older buildings
A handful of photos and a postcode is the fastest way to a quote. Upload them with the quote form, or ring 01277 525 020 or email drawings and photos to discuss it first.