
Commercial sealant contractors in Hollington, East Sussex
Sealant work in Hollington for main contractors, managing agents and facilities managers: sealant work for offices, shops, hotels and other commercial buildings, quoted at a fixed price.
- Gaps behind commercial kitchen worktops and sinks
- A top-up bead over failed sealant, now lifting
- Window and door perimeter joints that have cracked open
Commercial sealant contractors for Hollington sites
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
About our commercial sealant contractors in Hollington
Pricing a commercial reseal is a short process. Our quote form takes photographs, drawings or a schedule of the areas and you can also speak to us on 01277 525 020 or email us to talk it through. Where the photos don’t tell the full story, we arrange a site visit, and a fixed quote for the agreed scope follows. If you are dealing with messy, uneven beads from earlier work that let the building down and black mould through washroom sealant that won’t clean off, we can put it right, on external facade joints, floor and threshold joints and kitchen worktops and splashbacks alike. A single leaking joint is often how a building in Hollington first comes to us: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Occupied buildings in Hollington need the work phased: we agree the order with you and hand back each area with its cure time.
Small businesses near places like Hollington frequently occupy converted farm buildings. Old masonry and timber meet new glazing and partitions in these buildings, and every junction needs a sealant that suits it.
Work we carry out in East Sussex comes with a 12-month guarantee. Should something we installed fail, call 01277 525 020 or email drawings and photos and we will come back to it.

- Where
- Hollington (TN38, TN37, TN34)
- Region
- East Sussex
- Guarantee
- 12 months on our workmanship
- Quote
- Quoted before any work starts
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Looking after the joints
Once the work is signed off, these steps help:
- Make sure ventilation in wet areas is switched on and working
- Check the asbestos register before anyone disturbs old sealant in an older building
- Put external and wet-area joints on a regular inspection round
- Deal with small splits before they become leaks
Brief your cleaning team on the joints that have been resealed. Scourers, blades and harsh products shorten a bead’s life, while a neutral cleaner and a soft cloth do no harm.
A failed external joint lets water in every time it rains. Behind a panel or frame, that water can sit unseen for a long time. Resealing early keeps the problem in the sealant and out of the building.
Working on commercial sites near Hollington
With the shore within about 2 miles, Hollington counts as a coastal location. Buildings near the sea put their external joints through more driven rain, with salt air nearer the beach. Where a frontage needs a particular colour, the product still has to suit that exposure. Hollington is about 51 miles from central London. Business parks and retail centres are common around the capital’s motorway corridors. Occupiers with several premises in the region tend to prefer one contractor and one point of contact.
Offices and shops close to stations such as St Leonards Warrior Square station, 1.4 miles south of Hollington, tend to be busy all day, so sealant work is planned around opening hours. A hotel such as Beauport Park Hotel, 1.3 miles north of Hollington, shows how much sealant a hospitality building has on show, from bathroom joints to the bar.
Hollington is about 1 mile north-west of Hastings, in East Sussex. Looking for commercial sealant contractors in Hollington? We can help. Our East Sussex coverage takes in 308 places, from busy centres to rural villages. For work in that direction, see our Brighton page.
Work on sealant joints is covered throughout TN38, TN37 and TN34, whatever the building. Among the streets we cover are Kent Road, Duke Road and Ford Road. Main routes into Hollington include the A21, which helps when planning parking and deliveries for the job. Sites close to Hollington are covered too, including Silverhill (1 mile south-east), Hastings (1 mile south-east), Baldslow (1 mile north), St Helen's (1 mile east) and St Leonards (1 mile south). Further afield, our area takes in Eastbourne (13 miles south-west), Bexhill-on-Sea (4 miles south-west), Hailsham (13 miles west), Polegate (14 miles west), Old Town (14 miles south-west) and Heathfield (14 miles north-west).
Near you in Hollington
Recent enquiries here include premises near William Parker Sports College, The Wishing Tree pub and Old Roar Gill and Coronation Wood. The closest station to Hollington is St Leonards Warrior Square station, roughly 1.4 miles south of the centre. Well-known places in the area include Hastings Castle (2.1 miles south-east) and Conquest Hospital (1.1 miles north-east). The countryside around Hollington includes Senlac Hill and Church Wood and Robsack Wood.
From enquiry to sign-off
Diagnose, treat, sign off: every visit follows that pattern. We inspect the joints and confirm what’s in scope, then the work is carried out to the specified product and detail, and the job ends with a walk round and sign-off. Work in places the size of Hollington is planned as a single visit where we can. Clear photos and measurements help us bring the right products.
- You send photographs, drawings or a list of the joints and areas involved, or we arrange a site visit.
- Next comes a diagnosis and a fixed quote.
- Before anything is cut out, we agree access, timings and sequence.
- The failed bead is removed and the joint faces cleaned until they’re sound and dry.
- Backing and primer go in where needed, then the chosen sealant is applied and tooled.
- Each area is inspected, signed off and backed by our 12-month guarantee.
What we need from you
- Tell staff and tenants when we will be in
- For older buildings, check the asbestos register before work
- Send your site hours and access windows
Get a fixed quote
The quickest route to a quote is a few photographs and the site postcode. Send them through the quote form, or phone 01277 525 020 or email drawings and photos to discuss it first.
Advice
What we are called out for in Hollington
When a bead peels cleanly off one face, it has failed in adhesion. The usual causes are poor preparation, a missed primer, contamination on the joint face or sealant bonded to the base of the joint. It’s one of the commonest faults we find on earlier work.
Clients typically get in touch after noticing one or more of the following:
- Window and door perimeter joints that have cracked open
- Wall and floor joints that have lost their seal
- Black mould through washroom sealant that won’t clean off
- External beads that have gone brittle and cracked
A unit on an estate like Ponswood Industrial Estate, less than half a mile south of Hollington, usually has an office front, a trade counter and staff facilities with joints of their own.
What to look for in a quote
- Their plan for phasing and protecting the area
- Will CSCS-carded applicators be on site?
- Whether old or failed sealant will be cut out, not overlaid
- Their pre-qualification and accreditations
What the job involves on each surface
Window and door perimeters
Internally, window boards and frame edges often have decorators’ caulk or silicone that has cracked. The product depends on whether the joint will be painted.
Facade and cladding joints
On a facade, a failed joint is often only visible close up. Photos from a closer viewpoint help us price, and we’ll confirm the colours available for the specified product.
What sets the cost
We price every job individually. The main factors are:
- How accessible the joints are
- The size and state of each joint
- Travel to remote or island sites
- Induction, permit and paperwork requirements
The price depends on the quantity of joints, how much old material needs removing and the access. Call for a quote when you’re ready.
Details that help us quote
Diagnosis starts before we arrive. Tell us:
- A wide shot and a close-up of the area
- The asbestos register, for older buildings
- Specification clauses that apply
- Drawings or a marked-up plan, if available
Tell us about the building, the joints and when you need the work done, and we will put a fixed quote together. The easiest way is to call the office on 01277 525 020 or send details through our quote form.
Nearby places to Hollington
What else we do in Hollington
When something else is needed
Part of a good diagnosis is knowing where sealant stops. You’ll hear from us if the cause turns out to be any of the following:
- Misted, cracked or failed glazing units (a glazier’s job)
- Leaks from pipework, wastes or valves (that’s plumbing)
- Old mastic that tests positive for asbestos
If you are not sure, just ring 01277 525 020 or email a schedule or drawings and we will give you a straight answer.
Where we work in Hollington
- Floor and threshold joints
- Kitchen worktops and splashbacks
- Movement joints in walls and floors
- Window and door perimeters
- Washrooms and tea points
- External facade joints
Hollington: questions and answers
Do hotels near Hollington have to close for sealant work?
In most cases no closure is needed: we work room by room or floor by floor. The plan is built around your bookings.
Is Hollington off your patch?
Not at all. Hollington is within our area. We cover Greater London and the counties of the South East. Good photographs up front let us bring everything on the first visit.
Does commercial sealant work come with a guarantee?
Our workmanship is guaranteed for 12 months. We’re fully insured for public liability as well.
Which sealant will you use?
The specification comes first, if there is one. Without one, the joint decides: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
Is the old sealant taken out first?
Every failed bead is cut out completely. Laying new silicone on old gives it nothing to grip.
What site paperwork can you provide?
We confirm documents at quote stage: RAMS, an insurance certificate and CSCS details are the usual requests. Every applicator holds a CSCS card.
Can you take on work for an FM or managing agent?
Yes. You send the details, we return a fixed quote, and the job is done and signed off, with a 12-month guarantee on the workmanship.