Highstead expansion joint sealing
Sealant work in Highstead for main contractors, managing agents and facilities managers: expansion and movement joint sealing in walls, decks and floors, with a fixed quote first.
- Water getting into the wall through a failed joint
- Chipped joint edges on forklift routes
- Sealant peeling off one face of the joint
Expansion joint sealing across Highstead
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
How a job runs
We follow your site rules from the start: signing in, inductions and any permit to work. With the paperwork done, we take the joints in the sequence agreed with you. If others near Highstead need work, visits can be combined, which keeps travel down. You’ll have a fixed quote before work starts.
- We start with photos, approximate lengths and any drawings, visiting where needed.
- We compare each joint’s width with the movement and the sealant’s capability.
- Every joint is cleared of the failed seal and any grit packed into it.
- Edges are checked, and we tell you if any need repairing before sealing.
- A sealant suited to the movement and traffic is laid to depth and tooled.
- Each area is handed back after its cure time, under our 12-month guarantee.
Getting the site ready
- Tell us your opening times and when work is allowed
- Clear stock, furniture or equipment away from the joints
- For older buildings, check the asbestos register before work
Ask for a quote
Let us know the site, the scope and your timescale, and a fixed quote will follow. The easiest way is to ring 01277 525 020 or email us.
Advice
How we handle expansion joint sealing in Highstead
Long runs of brick or block have movement joints built in. Once the seal fails, rain reaches the cavity and the joint can no longer close. The old seal is cut away, backing rod goes in at depth, and a low-modulus masonry sealant is gunned and tooled, primed where the manufacturer specifies. We work on podiums and floor movement joints, precast concrete panel joints and car park decks and ramps, and what we are called in for most is chipped joint edges on forklift routes and sealant pulling off the joint face. One point of contact handles commercial sealant work in Highstead from the first photos to the final walk-round, whether it’s one building or several.
Around smaller places such as Highstead, floor joints are often in barns and farm buildings turned into workshops, stores and offices. Joints in those slabs take vehicles, trolleys and foot traffic, and need a filler or sealant to match.
We sign every job off with a 12-month guarantee. The promise is simple: if our work fails within that year, we put it right.
- Location
- Highstead (CT3, CT6)
- Region
- Kent
- Cover
- A 12-month guarantee
- Quotes
- A fixed quote before we start
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
What affects the price in Highstead
A fixed quote reflects the actual work. It takes account of:
- The size and state of each joint
- How accessible the joints are
- The product specified
- Induction, permit and paperwork requirements
Access can matter as much as the joints themselves: joints within easy reach take less time than ones that need access equipment. Mention the access as part of your enquiry.
Before you send an enquiry
We can often quote from photographs and a few details. Please tell us:
- The product your specification calls for
- Your programme or deadline
- The asbestos register, for older buildings
- Whether the building will be occupied during the work
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, speak to us on 01277 525 020 or send details through our quote form.
For managing agents and facilities managers
When you manage a building on behalf of an owner, you need clear quotes and clear reporting. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative.
We work for building owners and managing agents on everything from one building to a spread of sites. Several sites can go on one quote, so there’s one set of paperwork to deal with.
What we can’t put right
Honesty saves time and money. Fresh joints won’t solve:
- Cracking or settlement that calls for an engineer’s assessment
- Failed waterproofing membranes on podiums, roofs or decks (a waterproofing specialist’s job)
- Concrete or masonry repairs along the arrises
If in doubt, give us a call on 01277 525 020 or email a schedule or drawings and we’ll say what we think before you book.
What we seal
- Cladding panel joints
- Car park decks and ramps
- Blockwork control joints
- Brickwork movement joints
- Podiums and floor movement joints
- Precast concrete panel joints
Nearby places to Highstead
What else we do in Highstead
Joints that move: notes for Highstead
Highstead lies within about 2 miles of the sea. External movement joints in car parks, ramps and yards near the coast take salt and wind-driven rain on top of traffic, which is why split joints are worth sealing before the edges deteriorate. Highstead lies roughly 56 miles out from central London. The roads out of London are lined with trade parks and distribution sheds; their floors carry heavy traffic every shift.
Office parks like Chislet Business Park, 2 miles to the south of Highstead, have decks, ramps and clad elevations whose joints take movement every day. Large sites such as Queen Victoria Memorial Hospital (1.9 miles north-west of Highstead) have car parks, service roads and long elevations with movement joints in brick and panels.
Highstead is about 2 miles south-east of Herne Bay, in Kent. If you are looking for expansion joint sealing in Highstead, we can help. We work across 931 places in Kent, from busy centres to rural villages. We also cover London, around 56 miles from Highstead.
Work on movement joints is covered throughout CT3 and CT6. Nearby places we also cover include Hawthorn (1 mile north), Boyden Gate (1 mile south-east), Millbank (1 mile south-west), Old Tree (1 mile south) and Hillborough (1 mile north) for movement joints. Further afield, our area takes in Canterbury (7 miles south-west), Margate (9 miles east), Ramsgate (10 miles east), Broadstairs (11 miles east), Whitstable (6 miles west) and Deal (13 miles south-east).
Local landmarks in Highstead
We work on buildings around Bishopstone Cliffs and Hog & Donkey pub, among other places. Highstead’s nearest station is Herne Bay station, roughly 2.7 miles west of the centre. Well-known places in the area include Whitstable and Tankerton Hospital (5.6 miles west). The countryside around Highstead includes West Blean and Thornden Woods.
Common questions from Highstead clients
Does a coastal location like Highstead affect which sealant is used?
It can, yes: buildings near the sea take more wind-driven rain, and salt in the air nearer the shore. That puts more weight on product choice, primers where the manufacturer specifies them, and correct joint sizing.
Will you take on work at estates like Chislet Business Park, close to Highstead?
Yes. Our area takes in Highstead and its surroundings, with estates and business parks such as Chislet Business Park included. Send details of the unit and the work through our quote form for a quick quote.
Do you take on small jobs?
Whatever the size, the process is the same: send details, get a fixed quote, we seal, guaranteed.
Who decides which product is used?
Where there’s a specification, we use the product it names. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
What’s the quickest route to a quote?
The quote form is the simplest route, though you can also speak to us on 01277 525 020 or email the details over. Include photos or drawings if you have them.
Can one quote cover more than one building?
Yes. Multi-site work and planned programmes are a core part of the service, planned site by site to suit how each building is used.
Do you hold CHAS accreditation?
Yes. Mastic Doctor is CHAS accredited and a Constructionline member, which helps with supplier vetting.
Signs you need expansion joint sealing in Highstead
Sometimes the sealant holds but the substrate breaks away. Weak or crumbling concrete, brick or render edges give the sealant nothing sound to grip, so we tell you if the edges need repairing first.
Site and facilities staff are often the first to spot these:
- Previous reseals laid over old sealant
- Expansion joints filled with dirt and stones
- Rain penetration at brick or block movement joints
- Spalled or broken joint edges in floors and decks
Another example is Eddington Business Park, 2.5 miles west of Highstead, where floors and yards would be done in stages around the occupiers.
What your quote should include
- How the existing material will be dealt with
- Can the work be phased to keep areas open?
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- Will RAMS and insurance details be available?
Why deal with it now?
Doing joint resealing alongside other planned works can save on access. But joints already letting water in shouldn’t wait for a programme because damage continues. Urgent joints now, the rest later, is often the sensible plan. For buildings around smaller places like Highstead, water damage can go unnoticed for longer, especially where a building isn’t used daily, so a failed joint can leak for a while before anyone sees it. Resealing early avoids that.
What a job costs comes down to the quantity of joints, how much old material needs removing and how the joints are reached. Call for a fixed quote when you are ready.
Why appoint us
- One phone line for London, the South East and Scotland
- A Constructionline member, so easy to vet
- RAL and finish matching where the product range allows
- CHAS accredited contractor
Take a look at what affects the cost and how we’re accredited.