Expansion Joint Sealing in Hareshaw
We carry out expansion and movement joint sealing in walls, decks and floors in Hareshaw and the surrounding area. Send photographs or drawings for a fixed quote.
- Chipped joint edges on forklift routes
- Joints where the bead has lost adhesion
- Hardened, cracked sealant on exposed facades
Expansion joint sealing for businesses in Hareshaw
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
How we handle expansion joint sealing in Hareshaw
Joint design counts for as much as the sealant itself. Joint width must suit the movement and the movement class of the sealant, and depth is controlled using closed-cell backing rod, or bond-breaker tape in shallow joints. For wider joints, the width-to-depth ratio is often around 2:1, as the manufacturer advises. Site teams most often ask us about new sealant over old, now failing and spalled or broken joint edges in floors and decks, on car park decks and ramps, precast concrete panel joints and cladding panel joints. Most enquiries from Hareshaw start with one failed joint and grow into a wider look at the building: we look at the rest while we’re there and tell you what we find.
Around smaller Scottish places like Hareshaw, slabs needing attention are often in agricultural buildings, workshops, schools and hotels. Slabs and yards take vehicles, rain and frost.
Every job is signed off with a 12-month guarantee. The promise is simple: if the work we did fails within twelve months, we return to fix it.
- Where
- Hareshaw (ML1)
- Wider area
- North Lanarkshire
- Guarantee
- 12 months on every job
- Price
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Hareshaw: questions and answers
Can you work at a site such as Newhouse Industrial Estate, by Hareshaw?
Yes, sites like Newhouse Industrial Estate are within our area, along with the rest of Hareshaw. A few photos and the unit address let us price the work.
Is Hareshaw too far out for you?
No. Places such as Hareshaw are covered as much as the big towns. We work across every Scottish council area. Good photos up front let us bring everything on the first visit.
Will your applicators have CSCS cards?
Yes. Should the site need card details in advance, let us know and we will send them with the quote.
Do you use silicone or polyurethane in movement joints?
The specification comes first, then the joint’s movement and exposure. The quote states the sealant and its movement class, so you know what’s going in.
Can the building stay open while you work?
Normally, yes. We phase the work so most of the building stays in use, with each area protected and signed.
Does the weather affect joint sealing?
Sealant needs a dry joint and a temperature within the product’s range. Cold, damp or frosty mornings can stop work outside.
Can you work to our specification?
Yes. Include it with the drawings when you ask for a quote, and we will price the work to it.
Towns and villages near Hareshaw
Other services in Hareshaw
When it isn’t the sealant
A proper diagnosis includes knowing what sealant can’t do. We will tell you if the real problem is any of the following:
- Crumbling edges that would give a new bead nothing sound to grip
- Leaks coming from the membrane rather than the joint seal
- Proprietary pre-formed expansion joint systems
If you are not sure, just call 01277 525 020 or email a schedule or drawings and we’ll give you a straight answer before you book.
Where we work in Hareshaw
- Blockwork control joints
- Precast concrete panel joints
- Podiums and floor movement joints
- Cladding panel joints
- Car park decks and ramps
- Brickwork movement joints
What happens if it’s left?
Patching the worst lengths of a joint can make sense short term. The remaining sealant is often close to failing too. Where it helps, we quote both options. Renewing every failing joint on one visit is the sensible approach for a place like Hareshaw. Send photos and we will quote for everything together.
What a job costs comes down to the quantity of joints, how much old material needs removing and the access. Call for a quote when you are ready.
Why appoint us
- Failed material removed, not covered up
- Workmanship guaranteed for 12 months
- Colour options checked against the specified product
- Public liability insurance in place
Take a look at our cost guide and how we’re accredited.
Different surfaces, different methods
Joints between different materials
Some mixed-material joints suit a hybrid sealant. We pick the product for the materials and the movement, and confirm it in the quote.
Brickwork and blockwork joints
Vertical movement joints in brick and block walls let the masonry grow and shrink. We use a sealant rated for the movement, usually low-modulus, with backing rod setting the depth.
Slabs, ramps and loading bays in Hareshaw
Hareshaw has two named business or industrial parks inside a 3-mile radius. Sites like these are full of saw-cut floor joints, yard slabs and car park joints. The east of Scotland, where Hareshaw is, gets less rain than the west. Frost and de-icing salt still find their way into open external joints. Autumn is a sensible time to seal them.
Estates like Newhouse Industrial Estate (to the west of Hareshaw) combine warehouse slabs, yards and loading bays, all with joints under wheels. Schools such as Brannock High School have movement joints in their walls and floors that are easy to overlook.
Hareshaw is about 4 miles north of Wishaw, in North Lanarkshire. Any commercial site in Hareshaw is covered, for single jobs and planned programmes alike. Hareshaw is one of 100 places we cover in North Lanarkshire. For work in that direction, see our Glasgow page, about 15 miles away.
We cover the ML1 postcode districts for movement joints. For a building on Wilsons Road and Hareshaw Road or nearby, we can quote for movement joints. Close to Hareshaw, our area also takes in Biggar Road (1 mile south-west), Newarthill (1 mile south-west), Cleland (2 miles south), Chapelhall (2 miles north-west) and Gartness (3 miles north-west). Nearby towns on our patch include Motherwell (4 miles south-west), Cumbernauld (9 miles north-west), Coatbridge (5 miles west), Airdrie (4 miles north-west), Wishaw (4 miles south) and Bellshill (5 miles west).
Local landmarks in Hareshaw
The nearest railway station is Cleland station, about 1.6 miles south. Well-known places in the area include Murdostoun Castle (2.4 miles south-east) and Cleland Hospital (1.7 miles south). Not far away are Baron's Haugh RSPB Reserve and Allanton House lake.
Keeping the joints sound
Sealant joints are maintenance items, and how long they last depends on how they’re treated. We suggest:
- Inspect exposed joints once the cold weather has passed
- Keep stones and debris out of open joint lines
- Avoid parking heavy plant or pallets on joint lines
- Keep product details with the building records for the next reseal
Fresh joint sealant needs its full cure time before it takes traffic or water. The time varies with product, conditions and joint depth and we’ll tell you when each bay or area can reopen. Keeping the area coned off until then avoids tyre marks and damage.
External wall joints that fail let rain into the masonry and cavity. It can surface inside as damp a long way from the joint, well after the seal first opened. Catching it early keeps the water outside.
What we’re called out for in Hareshaw
When a bead pulls away from one face, it has lost adhesion. Dusty, damp or contaminated faces, a missing primer and three-sided adhesion are the usual causes and it often shows on rushed work.
Site and facilities staff are often the first to spot these:
- Joints packed with grit and debris
- Damp inside where a wall movement joint has failed
- Water dripping through deck or ramp joints
- Hardened, cracked sealant on exposed facades
At places like Chapelhall Industrial Estate, 2.5 miles to the north-west of Hareshaw, joints are sealed a section at a time so operations carry on.
Comparing quotes
- How joint depth will be controlled
- How they handle RAMS and site documents
- Is the sealant right for the movement and the substrate?
- Whether primer will be used where the manufacturer specifies it
From enquiry to sign-off
Inspect, seal, sign off: every visit follows that pattern. First comes an inspection and agreement on scope, then we prepare and seal each joint with the specified product, and we finish with a walk round so the work can be signed off. Jobs near Hareshaw are often grouped with others in the same area. Tell us how flexible your dates are.
- The first job is to check each joint: how wide it is, how it moves and why the old seal let go.
- You get a fixed quote with the product and its movement capability stated.
- We strip out the old seal and prepare the faces, and we tell you if any edges need repairing first.
- We control the depth with backing rod or, in shallow joints, bond-breaker tape.
- Primer goes on where the manufacturer specifies it, followed by the sealant, which is then tooled off.
- Finished joints are checked and backed by our 12-month guarantee.
Preparing the site
- Send asbestos survey details if the building is pre-2000
- Confirm the product named in the specification
- Explain the parking and delivery arrangements
Request a quote
Pricing a project or setting a maintenance budget? Send the scope and any drawings, and we’ll return a fixed quote that you can work with. For a chat about it beforehand, ring 01277 525 020 or email us.