Expansion Joint Sealing in Gerrards Cross
We carry out expansion and movement joint sealing in walls, decks and floors in Gerrards Cross. Send photographs or drawings for a fixed quote.
- Expansion joints filled with dirt and stones
- Spalled or broken joint edges in floors and decks
- Torn sealant in brick or block movement joints
Expansion joint sealing near Gerrards Cross
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Expansion joint sealing in Gerrards Cross, done properly
Width, depth and product all have to work together. The joint has to be wide enough for the expected movement and the sealant’s movement capability, and depth is controlled using closed-cell backing rod, or bond-breaker tape in shallow joints. For wider joints, the width-to-depth ratio is often around 2:1, as the manufacturer advises, and the bead is tooled so it grips the two faces alone. If you are dealing with weathered movement joint sealant that no longer flexes and arrises breaking up along floor joints, we can help. For commercial sealant work in Gerrards Cross, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.
Around places the size of Gerrards Cross, joints that need sealing tend to be in rural business units, farm buildings put to commercial use, schools and community buildings. Their slabs and walls still need movement joints that work.
Every job is signed off with a 12-month guarantee. It’s a plain promise: if the work we did fails within twelve months, we return to fix it.
- Location
- Gerrards Cross (SL9)
- Region
- Buckinghamshire
- Cover
- 12 months on our workmanship
- Quotes
- A fixed quote before we start
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Keeping the joints sound
Cleaning and maintenance staff play a part too. Share these points with them:
- Check joints after long freezing spells
- Keep stones and debris out of open joint lines
- Avoid parking heavy plant or pallets on joint lines
- Leave barriers in place until fresh joint sealant has cured
Floor joints on main traffic routes need watching more closely than the rest. Avoid standing heavy loads or racking legs on the joints and flag chipped arrises before they spread.
When one joint fails, others of the same age are rarely far behind. Inspecting the whole run is worth the effort, so the work can be planned rather than rushed. We’ll tell you which movement joints need doing now and which can wait.
Doing it in-house
Using site staff can make sense for a small touch-up, but larger jobs are different: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
What sealant work can’t fix
Not every problem is a sealant problem, and we’re upfront when that’s the case. It won’t fix:
- Crumbling edges that would give a new bead nothing sound to grip
- Movement on a scale no sealant is meant to absorb
- Mechanical expansion joint covers, cover plates or proprietary joint systems (a specialist supplier’s job)
If you are not sure, just call the office on 01277 525 020 or email drawings and photos and we’ll give you a straight answer before you book.
Joints and surfaces we work on
- Podiums and floor movement joints
- Car park decks and ramps
- Brickwork movement joints
- Precast concrete panel joints
- Blockwork control joints
- Cladding panel joints
Common questions from Gerrards Cross clients
Will our site in Gerrards Cross have to close for joint sealing?
Rarely. Work is phased around your operations. The phasing plan comes with the quote.
Can you work on a hospital site such as Spire Thames Valley Hospital?
Yes, hospitals are one of the sectors we cover. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Do you need to see the site first?
Photos, drawings or a schedule are often enough to quote. Where they aren’t, we arrange a site visit before quoting.
Is colour matching possible?
That depends on the product specified. Some ranges offer many colours, others very few, so the available colours are confirmed with the quote.
What will the job cost?
There isn’t a price list, as every site differs. With photos or drawings, we can give you a fixed quote.
When can you be on site?
We’re in the office from 8am until 5pm, Monday to Friday. Tell us your site hours and access windows and the work will be fitted around them.
Does the weather affect joint sealing?
Outside work depends on conditions because a damp or frozen joint won’t take a proper bond. Internal floor joints are far less affected.
What we are called out for in Gerrards Cross
Repeated failure often traces back to the wrong product. Products not classed for the movement fail early. Movement capability is set out in BS EN ISO 11600.
Common reasons buildings call us in:
- Torn sealant in brick or block movement joints
- Layers of sealant in a movement joint
- Water getting into the wall through a failed joint
- Water dripping through deck or ramp joints
For estates staff at a university like Buckinghamshire New University (3.8 miles south-east of Gerrards Cross), building and paving joints are part of the planned maintenance list.
Before you book anyone
- Are they CHAS accredited or on Constructionline?
- Their approach to joint depth and backing
- How long is the guarantee, and what does it include?
- Their plan for phasing and protecting the area
How a job runs
Inspect, seal, sign off: that’s the shape of every visit. First comes an inspection and agreement on scope, then the work is carried out to the specified product and detail, and we finish with a walk round so the work can be signed off. Work in places the size of Gerrards Cross is planned as a single visit where we can. Clear photos and measurements help us bring the right products.
- First the joints are inspected, widths measured and the type of failure noted.
- A fixed quote names the sealant we propose and its movement class.
- Where areas have to stay open, we agree a phased sequence before starting.
- The failed seal is cut out and both joint faces cleaned back to sound material.
- Depth is controlled with backing, the faces are primed where the maker calls for it, then the bead is laid and tooled.
- Finished joints are inspected, the cure time confirmed and the 12-month guarantee applies.
Preparing the site
- Send asbestos survey details if the building is pre-2000
- Tell us your opening times and when work is allowed
- Arrange parking or a loading space
Getting a fixed quote
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we’ll fill any gaps with a visit.
Advice
Places near Gerrards Cross
What else we do in Gerrards Cross
How the quote is worked out
Sealant work doesn’t have a standard rate, because every site is different. What we look at:
- Distance, for remote addresses
- Which sealant the job calls for
- The total length or number of joints
- Phasing around occupants
There’s no price list, since every building and every scope is different. Call for a quote and we’ll price your job on its own details.
Details that help us quote
Whether it’s one area or a whole building, these details speed things up:
- The site address and postcode
- Asbestos survey details if the building is older
- Specification clauses that apply
- The type of building and who uses it
To get a fixed quote, speak to us on 01277 525 020 or email a schedule or drawings with the site address and an outline of the work. You can also send details through our quote form.
Floors, slabs and movement joints in Gerrards Cross
Central London is about 21 miles from Gerrards Cross. Warehousing clusters around the motorways that ring and radiate from London, and their floor joints take forklift and pallet-truck traffic all day. Gerrards Cross sits in one of the drier corners of the country, the South East. External slab and deck joints still need a dry, clean joint to seal, while winter salting gets into any joint left open.
Schools such as The Gerrards Cross CofE School have movement joints in their walls and floors that are easy to overlook. Large sites such as Spire Thames Valley Hospital (2.8 miles south of Gerrards Cross) have car parks, service roads and long elevations with movement joints in brick and panels.
Gerrards Cross is about 5 miles north-east of Slough, in Buckinghamshire. We cover Gerrards Cross, with the same fixed quotes and 12-month guarantee as everywhere else. We work across 308 places in Buckinghamshire, from busy centres to rural villages. There’s a separate page for Reading, about 20 miles away.
We take on movement joints across the SL9 postcode area, for business premises of every kind. Buildings on Station Road, East Common and Oxford Road are within our area. Gerrards Cross sits on or close to the A40 and A413, useful when we plan access and materials. Sites close to Gerrards Cross are covered too, including Tatling End (1 mile south-east), Fulmer (1 mile south), Hedgerley Green (2 miles west), Higher Denham (2 miles east) and Baker's Wood (2 miles east). A short drive away, we cover High Wycombe (9 miles west), Chesham (9 miles north), Marlow (9 miles west), Amersham (7 miles north), Beaconsfield (4 miles north-west) and Princes Risborough (15 miles north-west).
What’s near Gerrards Cross
In Gerrards Cross, that means premises near St Mary's School, The Chalfonts Community College and Bulstrode Park, among other places. There’s a railway station in Gerrards Cross itself: Gerrards Cross station. Nearby you will also find Chiltern Open Air Museum (3.8 miles north) and Chalfonts and Gerrards Cross Hospital (1.7 miles north). The countryside around Gerrards Cross includes Horse Shoe Bay and Church Wood.