Expansion Joint Sealing in Amersham
Commercial sealant work in Amersham for contractors, FMs and building owners: expansion and movement joint sealing in walls, decks and floors, quoted at a fixed price.
- Sealant pulling off the joint face
- Leaks through car park deck joints onto the level below
- Layers of sealant in a movement joint
Expansion joint sealing for businesses in Amersham
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Expansion joint sealing in Amersham, done properly
Every structure moves a little, all the time: temperature, moisture, shrinkage and loading all make materials grow and shrink. Expansion and movement joints are built in so the structure can move without cracking. Mastic Doctor reseals movement joints in brickwork, blockwork, concrete, cladding and floors on sites in Amersham. We work on podiums and floor movement joints, brickwork movement joints and car park decks and ramps, and the failures we are asked to look at most are damp inside where a wall movement joint has failed and sealant peeling off one face of the joint. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in Amersham, preparation and product choice get the time they need.
In Amersham, as in most towns, brickwork and panel movement joints on public and commercial buildings age quietly. A split or hardened joint lets rain into the wall, and it can no longer take up the movement.
Our workmanship is guaranteed for 12 months. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Location
- Amersham (HP6, HP7)
- Region
- Buckinghamshire
- Guarantee
- 12 months on every job
- Price
- A fixed quote before we start
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
What affects the price in Amersham
The price varies from site to site. Expect it to depend on:
- The size and state of each joint
- Travel to remote or island sites
- Specialist products, such as fire-rated or hygienic sealants
- Removal of failed or old sealant
Larger quantities, tricky access or phasing all shape the price. So do site requirements such as inductions and permits.
Sending details for a quote
There’s no need for a formal survey. A few details are enough to get going:
- The product your specification calls for
- Rough lengths or quantities, or drawings if you have them
- Any dates the work must fit around
- Where the site is, with the postcode
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we’ll fill any gaps with a visit.
From enquiry to sign-off
A typical day starts with protection: masking tape along the joint edges and sheeting over anything nearby. On site, the work usually takes a short visit for a handful of joints, or several days or more for a car park deck or long runs of facade joints, and our waste is bagged and taken away as we go. For a town like Amersham, we try to group jobs for the same client into one visit, with one quote covering them. Tell us when the building is open and we’ll plan to suit.
- First, the joints are inspected for width, movement and the type of failure.
- A fixed quote follows, naming the sealant and its movement class.
- We strip out the old seal and prepare the faces.
- Closed-cell backing rod is set to depth, or bond-breaker tape in shallow joints.
- Primer goes on where the manufacturer specifies it, followed by the sealant, which is then tooled off.
- Each joint is inspected and handed over with our 12-month guarantee.
Preparing the site
- Send any specification or drawings in advance
- Tell staff and tenants when we’ll be in
- Share the asbestos register for older buildings
Request a quote
A handful of photos and a postcode is the fastest way to a quote. Send them through the quote form, or speak to us on 01277 525 020 or send details through our quote form to discuss it first.
Read more
Aftercare for building managers
Regular inspection catches problems early. In particular:
- Inspect exposed joints once the cold weather has passed
- Keep racking legs and heavy point loads off floor joints
- Clear dirt from joint lines during routine cleaning
- Keep scrapers and ploughs from dragging across joint sealant
Keep wheels, feet and water off new joints until the sealant has cured. How long that takes depends on the product, the temperature and the depth of the joint and we will tell you when each bay or area can reopen. Keeping the area coned off until then avoids tyre marks and damage.
Rain gets into walls through torn brick and block movement joints. The first sign is often a damp patch indoors. Resealing promptly prevents internal damage.
What we can’t put right
Before quoting, we check that sealant is the right answer. It isn’t the answer for:
- Broken or spalled joint edges, which need repairing before any sealant goes in
- Structural movement beyond what the joints were designed for (that needs a structural engineer)
- Joints too narrow for the movement, which need redesigning by the engineer
Not sure which it is? You can phone 01277 525 020 or send details through our quote form and we’ll tell you honestly.
Surfaces we seal
- Precast concrete panel joints
- Blockwork control joints
- Brickwork movement joints
- Cladding panel joints
- Podiums and floor movement joints
- Car park decks and ramps
Slabs, ramps and loading bays in Amersham
Rainfall across the South East, Amersham included, is lower than in many parts of the UK. Even so, yard and car park joints are only sealed when they’re dry and clean, and winter de-icing salt on car parks and ramps works into any open joint. The 3 miles around Amersham take in at least three named trading estates, business parks or retail parks. Sites like these are full of saw-cut floor joints, yard slabs and car park joints.
University campuses such as Buckinghamshire New University (1.9 miles west of Amersham) have car parks, paved walkways and building elevations with movement joints. Large sites such as Amersham Hospital, 1.3 miles to the south-west of Amersham, have car parks, service roads and long elevations with movement joints in brick and panels.
Amersham is about 7 miles north-east of High Wycombe, in Buckinghamshire. We cover Amersham, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. 308 places across Buckinghamshire fall within our area, including Amersham. For work in that direction, see our Reading page.
Anyone looking for expansion joint sealing in HP6 and HP7 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. For a building on Station Road, London Road West and Market Square or nearby, we can quote for movement joints. With the A355 and A404 nearby, Amersham is easy to get to with materials and equipment. If your building is just outside Amersham, we cover Amersham on the Hill (1 mile west), Chesham Bois (1 mile north), Waterside (1 mile north), Coleshill (2 miles south-west) and Hyde Heath (2 miles north-west). Bigger towns within reach include Aylesbury (13 miles north-west), High Wycombe (7 miles south-west), Chesham (3 miles north), Marlow (10 miles south-west), Beaconsfield (5 miles south-west) and Chalfont St Peter (5 miles south). Amersham ranks among the main centres of Buckinghamshire, with offices, shops, schools and other public and commercial buildings, and we cover them all.
Around Amersham
Recent enquiries here include premises near The Pheasant Public House, Woodside Junior School and Dr Challoner's Grammar School and the streets around them. There’s a railway station in Amersham itself: Amersham station. A little further out are Amersham Hospital (1.2 miles south-west) and Amersham Fair Organ Museum (under half a mile north-east). Not far away are Sands Bank.
Nearby places to Amersham
Other services in Amersham
Signs you need expansion joint sealing in Amersham
With no backing rod or bond-breaker in place, sealant grips the base of the joint too. Bonded on three faces, it can’t stretch evenly when the joint opens.
Clients usually get in touch after noticing one or more of the following:
- Previous reseals laid over old sealant
- Damp inside where a wall movement joint has failed
- Water dripping through deck or ramp joints
- Spalled or broken joint edges in floors and decks
Phasing is what makes joint work possible on busy sites such as St. Georges Industrial Estate (0.7 miles south-east of Amersham): one bay, aisle or car park row at a time.
What your quote should include
- Will CSCS-carded applicators be on site?
- How they handle RAMS and site documents
- Can the work be phased to keep areas open?
- The named product and why it was chosen
When to bring in a specialist
The visible bead is only part of the job. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.
A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Amersham: questions and answers
Must our site in Amersham stop work while the joints are done?
In most cases the site keeps working. Joints are done in phases, a bay, aisle or deck at a time. The phasing plan comes with the quote.
Does your area include sites such as Corinium Industrial Estate, near Amersham?
Yes, sites like Corinium Industrial Estate are within our area, along with the rest of Amersham. A few photos and the unit address let us price the work.
Which sealant will you use?
A specification, where there is one, decides it. Without one, the joint decides: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
Will your applicators have CSCS cards?
Yes. If you need card details for site access, tell us and we will confirm them with the quote.
What hours do you work?
Give us your site hours and any access windows in your enquiry, and we’ll plan around them. Our office runs Monday to Friday, 8am until 5pm.
Is any job too small?
Whatever the size, the process is the same: details, then a fixed price, then sealing, then a 12-month guarantee.
How long do sealant joints last?
It depends on movement, UV and weather, cleaning, traffic and the product. Sealant joints are maintenance items, so inspect them regularly.