Expansion and movement joint sealing in Enham Alamein, Hampshire
Expansion and movement joint sealing in walls, decks and floors in Enham Alamein and across Hampshire. CHAS accredited and fully insured, with a 12-month guarantee.
- Car park joints leaking onto vehicles below
- Weathered movement joint sealant that no longer flexes
- Expansion joints filled with dirt and stones
Need expansion joint sealing in Enham Alamein?
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Expansion joint sealing for commercial buildings in Enham Alamein
If you need expansion joint sealing in Enham Alamein, start with photos and joint lengths. Send them through our quote form, and we will arrange a site visit if needed. You can also call the office on 01277 525 020 or email the details over to talk the joints through. We work on blockwork control joints, precast concrete panel joints and brickwork movement joints, and the usual reasons a site gets in touch are new sealant over old, now failing and chipped joint edges on forklift routes. A specialist sealant contractor works differently from a general builder: in Enham Alamein, that means joint design, primers and backing rod as standard.
For a site near Enham Alamein, measurements and photos up front mean one trip where possible. Note joint widths and the traffic that uses them, and we’ll take it from there.
A 12-month guarantee applies to all our work in Hampshire. If an installation problem shows up, give us a call on 01277 525 020 or email drawings and photos and we’ll arrange a return visit.
- Location
- Enham Alamein (SP11)
- Wider area
- Hampshire
- Cover
- A 12-month guarantee
- Quote
- A fixed quote before we start
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
For managing agents and facilities managers
Blocks and communal areas make up much of the work for housing associations and agents. We phase the work so people keep access, with each stage agreed with your site contact.
As a CHAS accredited contractor and Constructionline member, we are straightforward to vet for your supplier list. We are fully insured, and our insurance certificate can go with the quote.
Also near Enham Alamein
More services for Enham Alamein
What the job involves on each surface
Car park decks and ramps
Deck and ramp joints take tyre loads, grit and de-icing salts. A trafficable sealant suited to the movement goes in with bays done in phases so the car park keeps running.
Joints between different materials
Junctions between brick and render, or concrete and cladding, move independently. The product must bond to both substrates and cope with the movement priming where the maker calls for it.
Warehouse floors and decks around Enham Alamein
Enham Alamein sits in one of the drier corners of the country, the South East. External joints still wait for dry conditions, and gritting in cold spells finds its way into open joints. Central London is about 62 miles from Enham Alamein. Warehousing clusters around the motorways that ring and radiate from London.
Across sites such as Enham Arch Retail Park (1.7 miles south of Enham Alamein), floor and movement joints can be sealed in phases so units keep working. Schools such as Smannell and Enham Church of England (Aided) Primary School have movement joints in their walls and floors that are easy to overlook.
Enham Alamein is about 2 miles north of Andover, in Hampshire. Businesses, contractors and managing agents in Enham Alamein can call on us for movement joints, as part of our coverage of Hampshire. Across Hampshire, 723 places are covered, Enham Alamein among them. There’s a separate page for Southampton, roughly 23 miles from Enham Alamein.
Anyone looking for expansion joint sealing in SP11 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. Streets here include Newbury Road, Montgomery Road and Kings Road. If your building is just outside Enham Alamein, we cover Upper Enham (1 mile north), Knights Enham (1 mile south), Little London (1 mile north-east), Smannell (1 mile east) and East Anton (1 mile south). A short drive away, we cover Winchester (14 miles south-east), Hyde (14 miles south-east), Tidworth (8 miles west), Weeke (13 miles south-east), Kempshott (14 miles east) and Stanmore (14 miles south-east).
Near you in Enham Alamein
Recent enquiries here include premises near The Hare & Hounds pub and Harrow Way Community School. For rail, the closest station is Andover station, about 2.2 miles south of the centre. Other landmarks nearby include Andover War Memorial Hospital (2 miles south-west) and Finkley Down Farm Museum (1.7 miles south-east). Green spaces nearby include Mill Lake and Anton Lakes.
Your questions answered
Is Enham Alamein off your patch?
Not at all: smaller places are covered as well as towns. We work across Greater London and the South East. Send photos and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
Is Glenmore Trade Park, near Enham Alamein, within your area?
Yes. Our area takes in Enham Alamein and its surroundings, with estates and business parks such as Glenmore Trade Park included. Photos and a short description are enough for a first look.
How soon can the area be used again?
That comes down to the sealant and the temperature. Some products skin over quickly but need longer to cure fully, so we’ll confirm the curing time on the day.
Can a joint be sealed if the edges are broken?
Spalled edges need repairing before a new seal will last, and we will point out where that’s the case. A bead on a broken edge soon lets go.
Can you send site paperwork?
Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we will confirm with the quote.
When can you be on site?
We’re in the office from 8am until 5pm, Monday to Friday. Let us know your site hours and access windows, and the work will be planned around them.
Can one quote cover more than one building?
Yes. We take on portfolio and planned maintenance work, planned site by site to suit how each building is used.
From enquiry to sign-off
We begin with a short walk round with whoever looks after the building, agreeing which joints are in scope, where to start and what must stay open. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. For a building around Enham Alamein, tell us how to find it and who will meet us. Send that with the details and we will confirm the plan with the quote.
- The first job is to check each joint: how wide it is, how it moves and why the old seal let go.
- You get a fixed quote with the product and its movement capability stated.
- We strip out the old seal and prepare the faces, flagging any broken edges that need repair before sealing.
- We control the depth with backing rod or, in shallow joints, bond-breaker tape.
- After any primer the maker requires, the bead is applied and tooled so it grips two sides only.
- We check every joint before sign-off, and the work carries our 12-month guarantee.
Getting the site ready
- Share your working hours and any access restrictions
- Tell staff and tenants when we will be in
- Move anything stored against the joints
Getting a fixed quote
Photos, drawings or a schedule of the joints are often enough for a fixed quote. Where a site visit makes more sense, we will arrange one.
Advice
What sets the cost
To price the job, we consider:
- Travel to remote or island sites
- Backing rod, priming and other preparation
- Specialist products, such as fire-rated or hygienic sealants
- The site’s rules and procedures
The specified product makes a difference, as does the preparation each joint needs, such as cutting out, priming or new backing rod. Access, phasing and site requirements come into it too.
Sending details for a quote
The more we know, the firmer the quote. When you get in touch, include:
- Rough lengths or quantities, or drawings if you have them
- The site address and postcode
- Anything awkward about access or site hours
- When you need the work done
A handful of photos and a postcode is the fastest way to a quote. Upload them with the quote form, or give us a call on 01277 525 020 or use the quote form to discuss it first.
Signs you need expansion joint sealing in Enham Alamein
Sealant peeling cleanly off one side is an adhesion failure. Dusty, damp or contaminated faces, a missing primer and three-sided adhesion are the usual causes and it often shows on rushed work.
If one of these sounds familiar, it’s time for a closer look:
- Water getting into the wall through a failed joint
- New sealant over old, now failing
- Spalled or broken joint edges in floors and decks
- Car park joints leaking onto vehicles below
For an estate such as Andover Hospital (Grounds), which lies south-west of Enham Alamein, the joints in ramps, decks and long building elevations all need attention over time.
Questions to ask before you book
- Can the work be phased to keep areas open?
- Will RAMS and insurance details be available?
- How the joint faces will be prepared and primed
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
Why it’s worth doing now in Enham Alamein
Re-sealing with the same product that failed is often a false economy. A higher movement class, or a design change by the engineer, may be needed and we’ll tell you honestly. Converted and older buildings near places like Enham Alamein tend to move, and aged sealant cracks. A sealant with the right movement capability, correctly sized, lasts far better.
Pricing movement joints depends on how many there are, their condition and the access, and any specification that applies. Call for a quote.
What you get with us
- A fixed quote before work starts
- CHAS accredited
- Specification-led, product-correct work
- Fully insured
Take a look at how commercial sealant jobs are priced and our accreditations.