Drem expansion joint sealing
Expansion and movement joint sealing in walls, decks and floors across Drem, by CSCS-carded applicators. CHAS accredited and fully insured.
- Sealant peeling off one face of the joint
- Movement joints with split or torn sealant
- Layers of sealant in a movement joint
Expansion joint sealing across Drem
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
How we handle expansion joint sealing in Drem
We have been sealing expansion and movement joints for over 20 years for contractors, facilities managers and owners. CHAS accredited, Constructionline member, CSCS-carded applicators and five million pounds of public liability insurance. Workmanship is backed by our 12-month guarantee. We work on cladding panel joints, precast concrete panel joints and car park decks and ramps, and what we’re called in for most is damp inside where a wall movement joint has failed and new sealant over old, now failing. A single leaking joint is often how a building in Drem first comes to us: we look at the rest while we’re there and tell you what we find.
Travel to smaller places like Drem is planned so the work is done in one trip where possible. Send photos, joint widths and details of the traffic first.
Our workmanship is guaranteed for 12 months. If our installation lets you down in that time, we return and fix it.
- Where
- Drem (EH39)
- Region
- East Lothian
- Cover
- 12 months on our workmanship
- Quote
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Different surfaces, different methods
Car park decks and ramps
Car park joints are some of the hardest-working joints in any building. We use a sealant made for wheel loads and the expected movement, phased so parts of the car park stay open.
Cladding panel joints
We confirm what access is in place before pricing. Close-up photos help us judge the joints or a site visit fills the gaps.
Where floor joints take the most wear near Drem
Drem lies within about 3 miles of the sea. Coastal yards and decks give their joints salt and wet weather to deal with, not just wheels, which is why split joints are worth sealing before the edges deteriorate. Being in the east of Scotland, Drem gets less rain than the west coast. Frost and winter road salt still work into open joints in car parks and yards. Autumn is a sensible time to seal them.
Large sites such as Roodlands General Hospital, 3.4 miles south of Drem, have car parks, service roads and long elevations with movement joints in brick and panels.
Drem is about 4 miles north of Haddington, in East Lothian. Our applicators travel to Drem for work on movement joints. Our East Lothian coverage takes in 48 places. For work in that direction, see our Edinburgh page.
Commercial sites across EH39 are covered. If your building is just outside Drem, we cover Athelstaneford (2 miles south-east), Kingston (2 miles north-east), Gullane (2 miles north-west), Aberlady (3 miles west) and Dirleton (3 miles north). Nearby towns on our patch include Musselburgh (11 miles south-west), Dunbar (10 miles east), Tranent (8 miles south-west), North Berwick (4 miles north-east), Prestonpans (8 miles south-west) and Cockenzie and Port Seton (7 miles west).
Near you in Drem
Drem has its own railway station: Drem station. Other landmarks nearby include Dick Galloway Archery Museum (1.4 miles north) and Saltcoats Castle (2 miles north-west). For a walk, there’s Marl Loch and Skid Hill.
FAQs: Drem
Will you take on work at estates like Gilmerton Industrial Estate, close to Drem?
Yes. We cover Drem and the area around it, including industrial estates, business parks and retail parks such as Gilmerton Industrial Estate. To start, just call 01277 525 020 or send photos by email with the unit, the joints involved and your access times.
Does a coastal location like Drem affect which sealant is used?
It can. Driven rain and salt are tougher on outside sealant than sheltered inland conditions. That puts more weight on product choice, primers where the manufacturer specifies them, and correct joint sizing.
Are your applicators CSCS-carded?
Yes. Our applicators hold CSCS cards.
Is any job too small?
Whatever the size, the process is the same: details, then a fixed price, then sealing, then a 12-month guarantee.
Can you handle several sites?
Yes. Several buildings can share a single quote, and you deal with one contact throughout.
Is movement joint sealing guaranteed?
A 12-month guarantee covers our workmanship. Keeping joints clear of debris helps them last.
What timescale should we allow for resealing expansion joints?
Expect a few hours to several weeks, depending on how many metres of joint there are and how much old sealant or filler needs removing, with phasing where areas must stay open. We’ll confirm when each area can be used again.
Why deal with it now?
Doing joint resealing alongside other planned works can save on access. But joints already letting water in shouldn’t wait for a programme, as damage continues meanwhile. We can split the scope into urgent and planned. In Scotland, wind-driven rain finds a failed joint quickly, and for a smaller place like Drem, a repair visit takes planning, so it’s better to act early.
Cost follows what’s involved: stripping out, preparation, sealing, access and phasing. Call for a quote.
What you get with us
- Colours confirmed for the specified product
- Colours chosen to suit frames, cladding or finishes where possible
- Constructionline member
- Fully insured
Take a look at how commercial sealant jobs are priced and our accreditations and insurance.
Quoting for work in Drem
These are the things that shape the price:
- How much there is to seal
- The site’s rules and procedures
- Which sealant the job calls for
- How accessible the joints are
Quantities, awkward access and phased working all shape the price. Site requirements like inductions and permits play a part as well, along with the time of year for external work.
What to include in your enquiry
However big the job, these details speed things up:
- Any dates the work must fit around
- Rough lengths or quantities, or drawings if you have them
- Access details, including height
- The type of building and who uses it
Every quote starts with the facts: the joints involved, quantities, access and the product called for. Share whatever details you have and we will fill any gaps with a visit.
Also near Drem
Also in Drem
On site: what to expect
We bring the products specified for the job, along with primers and backing rod. Joint faces are cleaned back to sound, dry surfaces, the manufacturer’s primer is applied where it’s called for, and each bead is tooled to a neat concave finish. Tell us who will meet us and how to get in at your building near Drem. We’ll confirm the plan with the fixed quote.
- We assess the joints on site or from photographs, noting widths and how each has failed.
- A fixed quote names the sealant we propose and its movement class.
- Where areas have to stay open, we agree a phased sequence before starting.
- We strip the old sealant or filler and prepare each face until it’s sound and dry.
- Depth is controlled with backing, the faces are primed where the maker calls for it, then the bead is laid and tooled.
- We check each joint with you, confirm the cure time and sign off under our 12-month guarantee.
What we need from you
- Have the specification and drawings to hand
- Share your working hours and any access restrictions
- Tell us which areas need to stay in use
Getting a fixed quote
Photos, drawings or a schedule of the joints are often enough for a fixed quote. Where a site visit makes more sense, we will arrange one.
Read more
Owners, agents and contractors
Main contractors use us as their sealant subcontractor, on new build and refurbishment alike. We work to your programme, your specification and your site rules, with CSCS-carded applicators on site.
Building owners and managing agents use us on everything from one building to a spread of sites around Drem. One quote can cover more than one site, which keeps the paperwork simple.
When to call us in Drem
When the movement exceeds the sealant’s capability, the bead tears. A joint that’s too narrow for the movement, or a product with the wrong movement class, will split through the middle. Resealing like for like often fails the same way unless width and product are reviewed.
What tends to prompt an enquiry:
- Leaks through car park deck joints onto the level below
- Torn sealant in brick or block movement joints
- Joints packed with grit and debris
- Spalled or broken joint edges in floors and decks
Warehouse floors on estates like Gilmerton Industrial Estate (2.8 miles south-east of Drem) carry pallet trucks and forklifts over every saw-cut joint.
What your quote should include
- Their public liability cover
- Will failed sealant be removed rather than covered?
- The named product and why it was chosen
- Will RAMS and insurance details be available?