Aberlady expansion joint sealing
Work needed on a movement joint in Aberlady? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Car park joints leaking onto vehicles below
- Joints packed with grit and debris
- Hardened, cracked sealant on exposed facades
Expansion joint sealing across Aberlady
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Work for main contractors and building owners
Facilities managers want contractors who arrive with the paperwork sorted. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm with the quote.
Blocks and communal areas make up much of the work for housing associations and agents. We phase the work so people keep access, with each stage agreed with your site contact.
About our expansion joint sealing in Aberlady
Long runs of brick or block have movement joints built in. Once the seal fails, rain reaches the cavity and the joint can no longer close. The old seal is cut away, backing rod goes in at depth, and a low-modulus masonry sealant is gunned and tooled with primer where the maker calls for it. We work on podiums and floor movement joints, car park decks and ramps and brickwork movement joints, and the usual reasons a site gets in touch are chipped joint edges on forklift routes and new sealant over old, now failing. A single leaking joint is often how a building in Aberlady first comes to us: we check the joints around it and give you an honest view of what needs doing now and what can wait.
For outside joints near Aberlady, the Scottish weather sets the timetable: sealant needs a dry joint and a temperature within its range, so dates have some give. Internal floors can be done whenever suits the site.
A 12-month guarantee applies to all our work. If an installation problem shows up, speak to us on 01277 525 020 or send photos by email and we will arrange a return visit.
- Place
- Aberlady (EH32)
- Wider area
- East Lothian
- Guarantee
- 12 months on our workmanship
- Quotes
- A fixed quote before we start
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
What we are called out for in Aberlady
Sun, rain and frost age external movement joints. UV hardens the surface, and the sealant loses its ability to stretch and opens at the next temperature swing.
These are often picked up first by site or facilities staff:
- Previous reseals laid over old sealant
- Movement joints with split or torn sealant
- Rain penetration at brick or block movement joints
- Hardened, cracked sealant on exposed facades
A healthcare site such as Roodlands General Hospital (to the south-east of Aberlady) depends on car parks, ramps and service yards whose joints take traffic all day.
Comparing quotes
- Whether old or failed sealant will be cut out, not overlaid
- Proof of insurance
- How they handle RAMS and site documents
- Will CSCS-carded applicators be on site?
Towns and villages near Aberlady
Also in Aberlady
Warehouse floors and decks around Aberlady
Aberlady is within about 1 mile of the coast. External movement joints in car parks, ramps and yards near the coast take salt and wind-driven rain on top of traffic, so a failed joint lets more in and the edges break up sooner. The east of Scotland, where Aberlady is, gets less rain than the west. Cold winters and gritting are hard on any yard or deck joint left open. Autumn is a sensible time to seal them.
In and around Aberlady, the right filler or sealant for each joint depends on the traffic and the movement it takes.
Aberlady is about 5 miles north-west of Haddington, in East Lothian. Commercial clients in Aberlady can call on us for movement joints. 48 places across East Lothian fall within our area, Aberlady among them. There’s a separate page for Edinburgh, roughly 14 miles from Aberlady.
Anyone looking for expansion joint sealing in EH32 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. For a building on High Street, West Main Street and Cockleshell Square or nearby, we can quote for movement joints. Just outside Aberlady, we also work in Gullane (2 miles north-east), Longniddry (3 miles south-west), Drem (3 miles east), Gladsmuir (4 miles south) and Dirleton (4 miles north-east). A short drive away, we cover Musselburgh (9 miles south-west), Haddington (5 miles south-east), Dunbar (13 miles east), Tranent (6 miles south-west), North Berwick (6 miles north-east) and Prestonpans (6 miles south-west).
Around Aberlady
Recent enquiries here include premises near Gosford Park, among other places. Aberlady’s nearest station is Longniddry station, about 2.4 miles south-west. Other landmarks nearby include Kilspindie Castle (under half a mile north-west) and Myreton Motor Museum (1.3 miles east). The countryside around Aberlady includes Marl Loch and Skid Hill.
Questions we’re asked in Aberlady
Can being near the sea in Aberlady affect the sealant we need?
It can. Driven rain and salt are tougher on outside sealant than sheltered inland conditions. Product choice and preparation matter more, and sea-facing elevations are worth inspecting more often.
Is a smaller place like Aberlady outside your area?
No. Places such as Aberlady are covered as much as the big towns. Our area covers all of Scotland, cities, towns and islands alike. We plan jobs in smaller places so return trips are kept to a minimum.
Can you follow the specification on our project?
Yes. Include it with the drawings when you ask for a quote, and we will price the work to it.
Who decides which product is used?
The specification comes first, if there is one. If there isn’t one, it comes down to the joint: its movement, its surfaces and what it has to cope with.
What guarantee do you give on joint sealing?
It’s backed by our 12-month guarantee. Tell us straight away if a joint we sealed gives trouble in that time.
Why do our movement joints keep failing?
Typically the joint is moving more than the sealant can take. We review the joint design as well as the sealant before pricing, rather than replacing like for like.
How long do sealant joints last?
Nobody can honestly give a figure in years, since movement, weather, cleaning and use all affect it. Regular inspection is the best way to catch problems early.
From enquiry to sign-off
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Joint faces are cleaned back to sound, dry surfaces, primer goes on where the manufacturer specifies it, and the sealant is tooled off neatly. Travel to smaller Scottish places like Aberlady is planned so the job is finished in one visit where possible, which is why we ask for photographs and a full list first. External joints need a dry spell as well.
- Photos, joint lengths and drawings come to us, or we visit.
- Joint widths and expected movement are checked against what the sealant can take, and flag anything that needs an engineer.
- Old sealant and debris are cut out of every joint.
- Any broken arrises or friable edges are flagged before work goes further.
- A sealant suited to the movement and traffic is laid to depth and tooled.
- Areas reopen once cured, and the work carries our 12-month guarantee.
Getting the site ready
- Share the asbestos register for older buildings
- Let building users know which areas are affected
- Confirm the product named in the specification
Quotes
Send us photos, drawings or a joint schedule are often enough for a fixed quote. If the job needs a look first, we will arrange a site visit.
Read more
When something else is needed
We seal joints; we don’t mend everything behind them. On its own, sealant can’t deal with:
- Crumbling edges that would give a new bead nothing sound to grip
- Movement on a scale no sealant is meant to absorb
- Proprietary pre-formed expansion joint systems
Not sure which it is? You can phone 01277 525 020 or send details through our quote form and we’ll tell you honestly before you book.
What we seal
- Cladding panel joints
- Car park decks and ramps
- Brickwork movement joints
- Precast concrete panel joints
- Podiums and floor movement joints
- Blockwork control joints
How the quote is worked out
To price the job, we consider:
- How much existing material needs removing
- Site requirements such as inductions and permits
- The total length or number of joints
- Specialist products, such as fire-rated or hygienic sealants
Small jobs and large programmes are priced from the same things: scope, access, product and programme. Call for a quote and we will put a fixed figure on it.
Details that help us quote
There’s no need for a formal survey. These details are enough to start:
- Rough lengths or quantities, or drawings if you have them
- A wide shot and a close-up of the area
- When you need the work done
- The postcode of the building
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. To take the first step, ring 01277 525 020 or use the quote form.
Aftercare for building managers
A few simple habits keep the new joints working:
- Include every elevation and deck joint in periodic inspections
- Keep product details with the building records for the next reseal
- Keep racking legs and heavy point loads off floor joints
- Look over external and deck joints after a hard winter
Keep wheels, feet and water off new joints until the sealant has cured. How long that takes depends on the product, the temperature and the depth of the joint and we’ll tell you when each bay or area can reopen. Keeping the area coned off until then avoids tyre marks and damage.
Floor joints with failed fillers break up quickly under wheels. Broken arrises jolt trucks, loads and drivers, and the damage spreads along the joint. Keeping the filler or sealant sound protects the floor.