Expansion and movement joint sealing in Chilworth Old Village, Hampshire
Need expansion joint sealing in Chilworth Old Village? It’s simple: send details, get a quote, we seal, guaranteed.
- Hardened, cracked sealant on exposed facades
- Sealant pulling off the joint face
- Movement joints with split or torn sealant
Expansion joint sealing near Chilworth Old Village
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Floors, slabs and movement joints in Chilworth Old Village
Central London is about 68 miles from Chilworth Old Village. The South East has large numbers of industrial estates and warehouses along the motorway corridors. Less than 3 miles from Chilworth Old Village there are at least three named estates and business parks. That puts plenty of warehouse floors, service yards and car parks close by, all with joints under traffic.
For estates staff at a university like University of Southampton, 2.9 miles south of Chilworth Old Village, building and paving joints are part of the planned maintenance list. Hospitals like Princess Anne Hospital, 2.3 miles to the south of Chilworth Old Village, have multi-storey or surface car parks whose joints carry vehicles round the clock. Office parks like University of Southampton Science Park (under half a mile south of Chilworth Old Village) have decks, ramps and clad elevations whose joints take movement every day.
Chilworth Old Village is about 2 miles south-west of Chandler's Ford, in Hampshire. We cover commercial sites throughout Chilworth Old Village, for single jobs and planned programmes alike. 723 places across Hampshire fall within our area, including Chilworth Old Village.
Commercial sites across SO16 are covered for movement joints. Sites close to Chilworth Old Village are covered too, including Chilworth (1 mile south-east), North Baddesley (1 mile north-west), Knightwood (2 miles north-east), Lordswood (2 miles south) and Bassett (2 miles south). A short drive away, we cover Winchester (8 miles north-east), Eastleigh (3 miles east), Fareham (13 miles south-east), Totton (5 miles south-west), Hedge End (6 miles south-east) and Romsey (3 miles north-west).
Landmarks near Chilworth Old Village
Around Chilworth Old Village, our work takes us to commercial buildings near Cantell School and the streets around them. Chilworth Old Village’s nearest station is Chandlers Ford station, roughly 2 miles north-east. Nearby you will also find Eastleigh Museum (2.9 miles east) and Princess Anne Hospital (2.3 miles south). Open spaces near Chilworth Old Village include Emer Bog and Baddesley Common.
About our expansion joint sealing in Chilworth Old Village
Floor movement joints in warehouses, retail and public buildings carry wheeled traffic. Without a sound filler, joint edges chip and spall under load, so the right filler or sealant for the traffic and movement matters. If the arrises are already broken, we’ll say so before sealing, and phased work keeps areas in use. We work on podiums and floor movement joints, blockwork control joints and brickwork movement joints, and what we are called in for most is car park joints leaking onto vehicles below and expansion joints filled with dirt and stones. Whoever orders the work in Chilworth Old Village, the brief is normally the same: a clear scope, tidy work and joints that don’t fail again.
For a site near Chilworth Old Village, measurements and photographs up front mean one trip where possible. Note joint widths and the traffic that uses them, and we will take it from there.
A 12-month guarantee applies to all our work. If an installation problem shows up, phone 01277 525 020 or send details through our quote form and we will arrange a return visit.
- Location
- Chilworth Old Village (SO16)
- Region
- Hampshire
- Guarantee
- 12 months on our workmanship
- Quotes
- A fixed quote before we start
- Call
- 01277 525 020
- Last updated
- 3 November 2026
What happens if it’s left?
Some quotes just add sealant over the old bead. A bead over the old seal can’t bond or flex. We cut out the old seal and prepare the faces every time. Around Chilworth Old Village, it’s better to renew all the failing joints at once. Photos of every joint help us quote for the whole job.
Access often affects the price as much as the sealing: easy-to-reach joints are quicker than those that need equipment to get to. Tell us how the joints are reached and call for a quote.
Why clients in Chilworth Old Village choose us
- One phone line for London, the South East and Scotland
- Over 20 years of commercial sealing
- Fully insured, including public liability cover
- 12 months’ guarantee on every job
Take a look at what affects the cost and how we’re accredited.
Nearby places to Chilworth Old Village
What else we do in Chilworth Old Village
From enquiry to sign-off
Inspect, seal, sign off: that’s the shape of every visit. First comes an inspection and agreement on scope, then the work is carried out to the specified product and detail, and the job ends with a walk round and sign-off. Jobs in and around smaller places like Chilworth Old Village are usually planned as a single visit, so photographs and measurements up front really help. That way the right products come on the day.
- We assess the joints on site or from photographs, noting widths and how each has failed.
- You receive a fixed quote stating the product and the movement it is rated for.
- Phasing is agreed so decks, floors or entrances can stay in use where needed.
- The failed seal is cut out and both joint faces cleaned back to sound material.
- Depth is controlled with backing, the faces are primed where the maker calls for it, then the bead is laid and tooled.
- We check each joint with you, confirm the cure time and sign off under our 12-month guarantee.
Getting the site ready
- Let building users know which areas are affected
- Share your working hours and any access restrictions
- Tell us what induction or permit system the site runs
Ask for a quote
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, call 01277 525 020 or email the details over.
Related advice
Aftercare for building managers
Problems stay small when the joints are checked regularly. In particular:
- Avoid parking heavy plant or pallets on joint lines
- Keep stones and debris out of open joint lines
- Brief car park operatives to protect joint lines during winter clearance
- Put movement joints on the planned maintenance inspection round
Add every elevation, deck and floor joint to your inspection round. Early splits and edges starting to lift show up on a routine check, when they’re still cheap to deal with. Should you spot a problem, you can call the office on 01277 525 020 or email us and send a picture.
On a multi-storey car park, a failed joint usually shows up as a leak onto the deck underneath. Salty water dripping through stains soffits and lands on parked vehicles and it can affect the structure over time. Sealing the joint promptly stops it at source.
Quoting for work in Chilworth Old Village
These are the things that shape the price:
- Induction, permit and paperwork requirements
- Travel to remote or island sites
- The size and state of each joint
- How accessible the joints are
Larger quantities, tricky access or phasing all shape the price. So do site requirements such as inductions and permits, along with the time of year for external work.
What we need to price the job
We can often quote from photographs and a few details. Please tell us:
- The asbestos register, for older buildings
- What the building is and how it’s used
- Your programme or deadline
- Approximate linear metres or a joint schedule
Tell us about the building, the joints and when you need the work done, and we will put a fixed quote together. To get it moving, call 01277 525 020 or email us.
Different surfaces, different methods
Car park decks and ramps
Failed deck joints often show as leaks on the level below. The old seal comes out, the edges are prepared and the joint resealed, and we’ll tell you if any edges need repairing first.
Cladding panel joints
Metal and composite panels shift considerably as temperatures change. A sealant with the right movement class is chosen in a colour confirmed for that product.
What we can’t put right
Sealant solves a lot, but not everything, and we’d rather tell you before you spend money. It won’t fix:
- Proprietary pre-formed expansion joint systems
- A joint that has to be widened or re-detailed before it can work
- Structural movement beyond what the joints were designed for (that needs a structural engineer)
If you’re not sure, just call 01277 525 020 or email a schedule or drawings and we will give you a straight answer before you book.
Joints and surfaces we work on
- Precast concrete panel joints
- Podiums and floor movement joints
- Blockwork control joints
- Cladding panel joints
- Brickwork movement joints
- Car park decks and ramps
Chilworth Old Village: questions and answers
Can you work at a site such as University of Southampton Science Park, by Chilworth Old Village?
Yes. We cover Chilworth Old Village and the area around it, including industrial estates, business parks and retail parks such as University of Southampton Science Park. A few photos and the unit address let us price the work.
Do you take on work at healthcare sites like Princess Anne Hospital?
Yes. We work in healthcare settings as well as offices and schools. We follow the site’s permits, sign-in and infection-control procedures in every area.
Do you cover Chilworth Old Village?
Yes. We take on work across Chilworth Old Village, and the same phone number covers every area.
Do your applicators hold CSCS cards?
Yes. Should the site need card details in advance, tell us and we’ll confirm them with the quote.
What exactly is a movement joint?
Movement joint is the broad term for any joint built in to let a structure move. In everyday use the two names are often swapped.
Does the weather affect joint sealing?
Sealing onto a damp surface leads to adhesion failure so we’d rather rearrange than seal in the rain. The work is simply moved to the next suitable day.
Can weather delay the job?
It can, for external work. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so external work may be moved if conditions aren’t right. Indoors, the weather is rarely a problem.