Expansion and movement joint sealing in Burley Street, Hampshire
Expansion and movement joint sealing in walls, decks and floors in Burley Street. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Car park joints leaking onto vehicles below
- Hardened, cracked sealant on exposed facades
- Previous reseals laid over old sealant
Expansion joint sealing across Burley Street
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Expansion joint sealing in Burley Street
For movement joints in Burley Street, photos and approximate lengths are the best start. Send them through our quote form, and we’ll arrange a site visit if needed. To discuss the joints first, phone 01277 525 020 or email us. We work on cladding panel joints, podiums and floor movement joints and car park decks and ramps, and what we are called in for most is damp inside where a wall movement joint has failed and layers of sealant in a movement joint. One point of contact handles commercial sealant work in Burley Street from the first photos to the final walk-round, whether it’s one building or several.
Around smaller places such as Burley Street, floor joints are often in barns and farm buildings turned into workshops, stores and offices. Whether it’s a farm store turned workshop or a storage unit, the joints need a product that suits the traffic.
Our workmanship is guaranteed for 12 months. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Place
- Burley Street (BH24)
- Wider area
- Hampshire
- Guarantee
- A 12-month guarantee
- Price
- A fixed quote before we start
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Should maintenance staff do it?
Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.
Your questions answered
Is Burley Street too small for you to travel to?
No. Small places get the same service as large ones. Our area covers London and the South East counties. We plan jobs in smaller places so return trips are kept to a minimum.
Does a site in Burley Street have to shut while its joints are sealed?
Normally not: we work in sections and hand each one back once it has cured. The phasing plan comes with the quote.
What do you charge?
That depends on the job: quantities, access, the product and any phasing. Call for a quote and we will price it properly.
Can you seal car park deck joints?
Yes, we do. Tyre loads, grit and de-icing salts make these some of the hardest joints to keep sealed.
Why do our movement joints keep failing?
Typically the joint is moving more than the sealant can take. We review the joint design as well as the sealant before pricing.
Are you CHAS accredited and on Constructionline?
Yes. CHAS accredited, Constructionline member, and our applicators hold CSCS cards.
How long do sealant joints last?
It depends on movement, UV and weather, cleaning, traffic and the product. Sealant joints are maintenance items, so inspect them regularly.
On site: what to expect
Before we leave any area, we remove the tape, clean down and inspect every joint with your site contact. If an area should be left alone while the sealant cures, we say how long and put signs out. Rural sites near Burley Street may need directions, gate codes or a contact on site. Send that with the details and we will confirm the plan with the quote.
- Photos, joint lengths and drawings come to us, or we visit.
- We compare each joint’s width with the movement and the sealant’s capability.
- Every joint is cleared of the failed seal and any grit packed into it.
- Any broken arrises or friable edges are flagged before work goes further.
- The right sealant goes in at the right depth, bonded to the two sides only.
- Each area is handed back after its cure time, under our 12-month guarantee.
What we need from you
- Warn occupants and staff about the work
- Agree which areas must stay open
- Make sure the joints can be reached
Quotes
Pricing a project or setting a maintenance budget? We’ll quote against your scope and drawings that you can work with. For a chat about it beforehand, speak to us on 01277 525 020 or email the details over.
Related advice
Floors, slabs and movement joints in Burley Street
Burley Street sits in one of the drier corners of the country, the South East. Even so, yard and car park joints are only sealed when they’re dry and clean, and where de-icing salt is spread in winter, open joints let it in. Burley Street has at least three named business or industrial parks inside a 3-mile radius. Floors, loading bays and yards on sites like these are where floor and movement joints work hardest.
For buildings at a park such as Platinum Jubilee Business Park, 2.8 miles to the west of Burley Street, brick and panel movement joints are easy to forget until one leaks. In a school such as Burley Primary School, movement joints in brick, block and hall floors tend to be forgotten until they leak. Phasing is what makes joint work possible on busy sites such as Hightown Industrial Estate (2.9 miles west of Burley Street): one bay, aisle or car park row at a time.
Burley Street is in Hampshire. Our applicators travel to Burley Street for work on movement joints. Across Hampshire, 723 places are covered, Burley Street among them. There’s a separate page for Southampton, about 15 miles away.
Commercial sites across BH24 are covered for movement joints. Buildings on Tyrells Lane, Ringwood Road and Forest Road are within our area for movement joints. Sites close to Burley Street are covered too, including Burley (1 mile south-east), Foulford (2 miles north-west), Forest Corner (2 miles north-west), Shobley (2 miles north-west) and Bagnum (2 miles south-west). Bigger towns within reach include Totton (11 miles north-east), Lymington (9 miles south-east), Romsey (15 miles north-east), Hythe (14 miles east), New Milton (6 miles south) and Ringwood (3 miles west).
What’s near Burley Street
We work on buildings around The Queen's Head pub. Green spaces nearby include Linbrook Lake and Blashford Lakes.
Surface by surface
Car park decks and ramps
Car park joints are some of the hardest-working joints in any building. A trafficable sealant suited to the movement goes in with bays done in phases so the car park keeps running.
Internal floor movement joints
Floor joints include saw-cut joints and construction joints. A semi-rigid filler is common in trafficked industrial floors.
Quoting for work in Burley Street
To price the job, we consider:
- Travel to remote or island sites
- How much existing material needs removing
- The size and state of each joint
- The site’s rules and procedures
Access often affects the price as much as the sealing: joints within easy reach take less time than ones that need access equipment. Mention the access as part of your enquiry.
Details that help us quote
It doesn’t need to be a full survey. These details are enough to start:
- Any dates the work must fit around
- What the building is and how it’s used
- The site address and postcode
- Access details, including height
Send us photos, drawings or a joint schedule and a fixed quote comes back to you. Where a site visit makes more sense, we’ll arrange one.
Other services in Burley Street
Honest limits
Not every problem is a sealant problem, and we are upfront when that’s the case. These need a different solution:
- Damaged metal nosings or cover plates over a joint
- Concrete or masonry repairs along the arrises
- Structural movement beyond what the joints were designed for (that needs a structural engineer)
If in doubt, speak to us on 01277 525 020 or email us and we will say what we think before you book.
What we seal
- Car park decks and ramps
- Blockwork control joints
- Cladding panel joints
- Podiums and floor movement joints
- Precast concrete panel joints
- Brickwork movement joints
What happens if it’s left?
Combining joint work with other maintenance reduces set-up costs. Leaking joints need sealing now. We can split the scope into urgent and planned. Halls, stores and units around places like Burley Street may not be checked every day, so a failed joint can leak for a while before anyone sees it. Resealing early avoids that.
No two sites price the same: joint size, product, access and site hours all play a part. Send the details and a fixed figure follows.
Why choose Mastic Doctor in Burley Street
- A range of standard colours, depending on the product
- Fixed quotes based on photos, drawings or a visit
- One phone line for London, the South East and Scotland
- A Constructionline member, so easy to vet
See how commercial sealant jobs are priced or our accreditations.