
Expansion and movement joint sealing in Braishfield, Hampshire
Need expansion joint sealing in Braishfield? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Sealant peeling off one face of the joint
- Chipped joint edges on forklift routes
- Layers of sealant in a movement joint
Need expansion joint sealing in Braishfield?
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Should maintenance staff do it?
Some joints are best left to specialists: for example fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. Getting these wrong normally costs more in the end than doing them right.
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and we will confirm the paperwork you need with the quote.
Expansion joint sealing in Braishfield
Internal floor joints take trolleys, pallet trucks and forklifts. Unsupported edges break up under wheels. We will tell you if the edges need repairing before sealing, and phased work keeps areas in use. If you are dealing with rain penetration at brick or block movement joints and joints packed with grit and debris, we can help, on brickwork movement joints, cladding panel joints and podiums and floor movement joints alike. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: in Braishfield, that means joint design, primers and backing rod as standard.
Around smaller places such as Braishfield, floor joints are often in barns and farm buildings turned into workshops, stores and offices. Whether it’s a farm store turned workshop or a storage unit, the joints need a product that suits the traffic.
We stand behind the joints we seal with a 12-month guarantee. That covers our preparation and application, and we come back if anything isn’t right.
- Place
- Braishfield (SO51)
- Wider area
- Hampshire
- Cover
- 12 months on every job
- Quote
- Quoted before any work starts
- Phone
- 01277 525 020
- Last updated
- 3 November 2026

How a job runs
Before any cutting starts, the area is protected: tape along each joint edge and covers over finishes, stock and equipment close by. The work itself usually takes a few hours to several weeks, depending on how many metres of joint there are and how much old sealant or filler needs removing, and we clear our waste as we work. For a building around Braishfield, tell us how to find it and who will meet us. Add it to your enquiry and we’ll build it into the plan.
- We start with photos, approximate lengths and any drawings, visiting where needed.
- We compare each joint’s width with the movement and the sealant’s capability.
- Old sealant and debris are cut out of every joint.
- Any broken arrises or friable edges are flagged before work goes further.
- A sealant suited to the movement and traffic is laid to depth and tooled.
- Each area is handed back after its cure time, under our 12-month guarantee.
What we need from you
- Point out parking and an unloading spot
- Send asbestos survey details if the building is pre-2000
- Warn occupants and staff about the work
Quotes
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To ask for one, ring 01277 525 020 or use the quote form.
Related advice
Nearby places to Braishfield
What else we do in Braishfield
How the job changes by surface
Car park decks and ramps
Deck and ramp joints take tyre loads, grit and de-icing salts. A trafficable sealant suited to the movement goes in, phased so parts of the car park stay open.
Cladding panel joints
Access to cladding joints is agreed before the price is fixed. Close-up photos help us judge the joints.
Traffic, movement and joints around Braishfield
The South East is one of the drier parts of the UK. External joints still wait for dry conditions, and winter de-icing salt on car parks and ramps works into any open joint. Central London is about 68 miles from Braishfield. Warehousing clusters around the motorways that ring and radiate from London.
Warehouse floors on estates like Yokesford Hill Industrial Estate (to the south-west of Braishfield) carry pallet trucks and forklifts over every saw-cut joint. Schools like Braishfield Primary School often have long brick elevations with movement joints that age quietly.
Braishfield is about 2 miles north of Romsey, in Hampshire. We cover Braishfield, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Braishfield is one of 723 places we cover in Hampshire. We also cover Southampton, around 8 miles from Braishfield.
We cover the SO51 postcode districts for movement joints. Buildings on Braishfield Road, Common Hill Road and Newport Lane are within our area. We also cover Belbins (1 mile south-west), Lower Slackstead (1 mile east), Abbotswood (1 mile south-west), Crampmoor (1 mile south) and Gosport (2 miles south-east). A short drive away, we cover Winchester (7 miles east), Eastleigh (6 miles south-east), Andover (13 miles north), Totton (7 miles south), Chandler's Ford (4 miles south-east) and Hedge End (10 miles south-east).
What’s near Braishfield
In Braishfield, that means premises near The Romsey School and The Wheatsheaf pub. For rail, the closest station is Romsey station, roughly 2.4 miles south-west. Other landmarks nearby include King Johns House (2.7 miles south-west) and Romsey Community Hospital (2.2 miles south). Green spaces nearby include Emer Bog and Baddesley Common.
Looking after the joints
Cleaning and maintenance staff play a part too. Pass these on to them:
- Reopen bays and walkways only after the stated cure time
- Brief car park operatives to protect joint lines during winter clearance
- Record the sealant used and the date in the O&M file
- Plan racking layouts so feet don’t land on a joint
Movement joints belong on the planned maintenance inspection list. Early splits and edges starting to lift show up on a routine check. If anything looks wrong, call the office on 01277 525 020 or email the details over with photographs.
An open joint fills with grit, and a joint full of grit can’t close. The arrises crack and break away under the load and the reseal becomes an edge repair as well. Keeping the seal sound avoids all of that.
Questions about Braishfield
Is Braishfield too far out for you?
Not at all. Braishfield is within our area. London and every South East county are within our area. Good photographs up front let us bring everything on the first visit.
Do you take on work at healthcare sites like Romsey Hospital?
Yes, provided the work is planned with the site’s estates team. We follow the site’s permits, sign-in and infection-control procedures in every area.
Do you need to see the site first?
That depends on the size and complexity of the job. Simple work can often be priced from photos, and bigger or more complex jobs normally get a visit.
How long does movement joint sealing take?
Expect a short visit for a handful of joints, or several days or more for a car park deck or long runs of facade joints. Cure time before reopening is confirmed on the day.
When can you be on site?
Mention the site’s hours and access windows in your enquiry, and we will schedule the work to suit. You can reach the office between 8am and 5pm, Monday to Friday.
Do you use silicone or polyurethane in movement joints?
Whatever suits the joint and the specification. The quote states the sealant and its movement class so there are no surprises.
What guarantee do you give on joint sealing?
Each job is backed by a 12-month guarantee on the workmanship. The guarantee covers how we sealed, not damage caused afterwards.
Signs you need expansion joint sealing in Braishfield
Three-sided adhesion is a common cause of early failure. Bonded on three faces, it can’t stretch evenly when the joint opens so backing is set before sealing.
These are often picked up first by site or facilities staff:
- Damp inside where a wall movement joint has failed
- New sealant over old, now failing
- Sealant peeling off one face of the joint
- Movement joints with split or torn sealant
At places like Belbins Business Park, 1.3 miles south-west of Braishfield, joints are sealed a section at a time so operations carry on.
What to look for in a quote
- Are they CHAS accredited or on Constructionline?
- The terms of the workmanship guarantee
- Which product they’ll use, and why it suits the joint
- Whether primer will be used where the manufacturer specifies it
What sealant work can’t fix
Not every problem is a sealant problem, and we are upfront when that’s the case. It won’t fix:
- Waterproofing layers buried beneath the sealant
- Joints too narrow for the movement, which need redesigning by the engineer
- Broken or spalled joint edges, which need repairing before any sealant goes in
If in doubt, call the office on 01277 525 020 or email a schedule or drawings and we’ll say what we think before you book.
What we seal
- Precast concrete panel joints
- Podiums and floor movement joints
- Blockwork control joints
- Brickwork movement joints
- Car park decks and ramps
- Cladding panel joints