Expansion Joint Sealing in Blissford
We carry out expansion and movement joint sealing in walls, decks and floors in Blissford and the surrounding area. Send photos or drawings for a fixed quote.
- Spalled or broken joint edges in floors and decks
- Leaks through car park deck joints onto the level below
- Debris jammed in movement joints
Expansion joint sealing across Blissford
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Expansion joint sealing for commercial buildings in Blissford
Few joints take as much punishment as those in a car park. Wheel loads, grit and de-icing salts attack the seal and the concrete either side. We reseal deck and ramp joints with a trafficable sealant chosen for the movement, phasing bays so the car park can stay in use. We work on podiums and floor movement joints, precast concrete panel joints and car park decks and ramps, and what we’re called in for most is torn sealant in brick or block movement joints and rain penetration at brick or block movement joints. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: in Blissford, that means joint design, primers and backing rod as standard.
In and around smaller places like Blissford, the concrete floors we see are often in converted farm buildings, small workshops and storage units. Whether it’s a farm store turned workshop or a storage unit, the joints need a product that suits the traffic.
Work we carry out comes with a 12-month guarantee. Should something we installed fail, give us a call on 01277 525 020 or send photos by email and we will come back to it.
- Place
- Blissford (SP6)
- Region
- Hampshire
- Guarantee
- 12 months on our workmanship
- Price
- A fixed quote before we start
- Call
- 01277 525 020
- Updated
- 3 November 2026
Maintenance after handover
To get the most from the new sealant:
- Include every elevation and deck joint in periodic inspections
- Check joints after long freezing spells
- Reopen bays and walkways only after the stated cure time
- Clear dirt from joint lines during routine cleaning
Keep wheels, feet and water off new joints until the sealant has cured. How long that takes depends on the product, the temperature and the depth of the joint and we will tell you when each bay or area can reopen. Barriers left in place until then protect the finish.
Unsupported floor joint edges spall under forklift and pallet-truck wheels. Damaged edges make the floor rough and wear wheels faster. Keeping the filler or sealant sound protects the floor.
Do you need expansion joint sealing in Blissford?
Some joints were never sealed with the right product. A stiff or general-purpose sealant across a joint with large movement won’t cope. BS EN ISO 11600 classifies building sealants by movement capability.
Most enquiries start with something like this:
- Car park joints leaking onto vehicles below
- New sealant over old, now failing
- Hardened, cracked sealant on exposed facades
- Joints packed with grit and debris
Across sites such as Fordingbridge Business Park, 2.4 miles west of Blissford, floor and movement joints can be sealed in phases so units keep working.
What to look for in a quote
- Can the work be phased to keep areas open?
- Will failed sealant be removed rather than covered?
- Their approach to joint depth and backing
- Whether primer will be used where the manufacturer specifies it
Where floor joints take the most wear near Blissford
Rainfall across the South East, Blissford included, is lower than in many parts of the UK. Even so, yard and car park joints are only sealed when they’re dry and clean, and gritting in cold spells finds its way into open joints. The 3 miles around Blissford take in two named trading estates, business parks or retail parks. Sites like these are full of saw-cut floor joints, yard slabs and car park joints.
Schools such as Hyde Church of England Primary School have movement joints in their walls and floors that are easy to overlook. Estates like Arch Farm Industrial Estate, 2.2 miles north-west of Blissford, combine warehouse slabs, yards and loading bays, all with joints under wheels.
Blissford is in Hampshire. We cover Blissford and the rest of Hampshire, with the same fixed quotes and 12-month guarantee as everywhere else. We work across 723 places in Hampshire, from busy centres to rural villages. Our Southampton page has more on work in that area.
Business premises anywhere in SP6 are within our area for movement joints. Among the streets we cover are Blissford Hill, Blissford Cross and Abbots Well Road, and sites on any of them can send details for a fixed quote. We also cover Frogham (1 mile south), Hyde (1 mile south-west), Hungerford (1 mile south-west), Stuckton (1 mile west) and Criddlestyle (1 mile north-west). A short drive away, we cover Totton (11 miles east), Lymington (14 miles south-east), Romsey (13 miles north-east), New Milton (12 miles south), Ringwood (5 miles south) and Barton on Sea (13 miles south).
Around Blissford
Recent enquiries here include premises near The Fighting Cocks pub and The Burgate School and Sixth Form. Other landmarks nearby include Fordingbridge Doll Museum (1.6 miles west) and Godshill Castle Hill (1.8 miles north). Green spaces nearby include Blashford Lakes and Linbrook Lake.
Honest limits
Our job is the joint, not everything around it. On its own, sealant can’t deal with:
- Broken or spalled joint edges, which need repairing before any sealant goes in
- Changing the joint layout or spacing of a structure
- Waterproofing layers buried beneath the sealant
If in doubt, speak to us on 01277 525 020 or send photos by email and we will say what we think.
Surfaces we seal
- Brickwork movement joints
- Car park decks and ramps
- Podiums and floor movement joints
- Blockwork control joints
- Cladding panel joints
- Precast concrete panel joints
Why it’s worth doing now in Blissford
Sealing over a failed movement joint is a common shortcut. A bead over the old seal can’t bond or flex, so it fails quickly. We cut out the old seal and prepare the faces every time. Converted and older buildings near places like Blissford tend to move, and aged sealant cracks. A sealant with the right movement capability, correctly sized, lasts far better.
The price depends on the quantity of joints, how much old material needs removing and how the joints are reached. Call for a quote once you have the details.
Why choose Mastic Doctor in Blissford
- Matching to RAL references, product permitting
- 12-month guarantee on workmanship
- Coloured sealants to suit the setting, where available
- One number for every site we cover
Take a look at our cost guide and our accreditations and insurance.
Blissford: questions and answers
Will you take on work at estates like Arch Farm Industrial Estate, close to Blissford?
Yes, sites like Arch Farm Industrial Estate are within our area, along with the rest of Blissford. Photos and a short description are enough for a first look.
Would you work within a site like Fordingbridge Hospital?
Yes. We work in healthcare settings as well as offices and schools. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Can you work on car park ramps and decks?
Yes. These joints take wheels, salt and water, so product choice matters, and we’ll tell you if any edges need repairing first.
How do you deal with asbestos in old sealant?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. We check the asbestos register before cutting out old sealant in an older building, and if asbestos is suspected, work stops until it’s tested. We don’t remove asbestos-containing materials.
Does weather matter for sealant work?
For external joints, yes. Sealant needs a dry joint and a temperature within the product’s range, so damp, frosty or very cold days can stop external work. Inside work is seldom held up.
When can you be on site?
We’re in the office from 8am until 5pm, Monday to Friday. Tell us your site hours and access windows and the work will be fitted around them.
Can you follow the specification on our project?
Yes. Include it with the drawings when you ask for a quote, and the quote will be based on it, flagging anything that needs clarifying.
On site: what to expect
We begin with a short walk round with whoever looks after the building, agreeing which joints are in scope, where to start and what must stay open. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. Smaller jobs around Blissford can be grouped with others nearby. A fixed quote is given before anything starts.
- The first job is to check each joint: how wide it is, how it moves and why the old seal let go.
- You get a fixed quote with the product and its movement capability stated.
- The failed seal is removed and both faces are cleaned until sound and dry, flagging any broken edges that need repair before sealing.
- Backing rod goes in at the right depth, or bond-breaker tape where the joint is shallow.
- After any primer the maker requires, the bead is applied and tooled so it grips two sides only.
- Each joint is inspected and handed over with our 12-month guarantee.
Preparing the site
- Clear stock, furniture or equipment away from the joints
- Have the specification and drawings to hand
- Point out parking and an unloading spot
Request a quote
Every quote starts with the facts: the joints involved, quantities, access and the product called for. Send what you have, and we will arrange a site visit if anything is unclear.
Related advice
Surface by surface
Brickwork and blockwork joints
Long brick and block elevations have movement joints at intervals. We use a sealant rated for the movement, normally low-modulus, with backing rod setting the depth.
Concrete and precast panel joints
Concrete edges can be weak or carry release agents that stop adhesion. We prepare the faces thoroughly and prime where the maker calls for it and check the edges for soundness as we go.