Expansion and movement joint sealing in Auchenblae, Aberdeenshire
Expansion joint sealing in Auchenblae, backed by over 20 years in commercial sealing. Fully insured, with a 12-month guarantee.
- Debris jammed in movement joints
- Previous reseals laid over old sealant
- Joints where the bead has lost adhesion
Expansion joint sealing for businesses in Auchenblae
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
How we handle expansion joint sealing in Auchenblae
The seal is what lets a movement joint do its job. When the sealant splits or lets go, the gap fills with dirt and water, the joint can’t close properly and its edges begin to crumble. Resealing at the first signs of failure is far cheaper than repairing the material either side. If you have weathered movement joint sealant that no longer flexes and leaks through car park deck joints onto the level below, we can help, on car park decks and ramps, podiums and floor movement joints and precast concrete panel joints alike. Looking for mastic applicators who cover Auchenblae? Mastic Doctor has worked for contractors, FMs and building owners since 2005, CHAS accredited and a Constructionline member.
In smaller places such as Auchenblae, the joints we’re asked about sit in workshops, farm sheds, schools and halls. Concrete slabs and yards there take vehicles and weather.
The 12-month guarantee covers our workmanship: preparation, application and finish. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Place
- Auchenblae (AB30)
- Wider area
- Aberdeenshire
- Cover
- 12 months on our workmanship
- Quotes
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
How the quote is worked out
To price the job, we consider:
- How much there is to seal
- Travel to remote or island sites
- Working within restricted access windows
- How accessible the joints are
Larger quantities, tricky access or phasing all shape the price. So do site requirements such as inductions and permits, along with the time of year for external work.
Sending details for a quote
Diagnosis starts before we arrive. Tell us:
- Whether an asbestos survey exists
- Specification clauses that apply
- Your programme or deadline
- Where the site is, with the postcode
Need a figure for a tender or a budget? We will quote against your scope and drawings you can plan around. For a chat about it beforehand, give us a call on 01277 525 020 or send photos by email.
Our process
We schedule the visit to fit the site hours and access windows you give us. On the day, the work area is kept contained and tidy, and we check in with your contact before moving on to each new area. Jobs near Auchenblae are often grouped with others in the same area. Let us know if your dates have any give.
- First the joints are inspected, widths measured and the type of failure noted.
- A fixed quote names the sealant we propose and its movement class.
- Phasing is agreed so decks, floors or entrances can stay in use where needed.
- We strip the old sealant or filler and prepare each face until it’s sound and dry.
- Backing rod or bond-breaker sets the depth, primer goes on where specified, and the sealant is applied and tooled.
- We check each joint with you, confirm the cure time and sign off under our 12-month guarantee.
Preparing the site
- Let us know about inductions and permits
- Confirm the product named in the specification
- Arrange parking or a loading space
Getting a fixed quote
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To ask for one, ring 01277 525 020 or send photos by email.
Read more
Auchenblae: questions and answers
Do we have to stop operations in Auchenblae while the joints are sealed?
Rarely. Work is phased around your operations. The phasing plan comes with the quote.
What paperwork can you provide for a job in Auchenblae?
We will confirm the paperwork you need, such as RAMS, our insurance certificate and CSCS details, with the quote. We hold £5m public liability insurance, are CHAS accredited and a Constructionline member, and our applicators are CSCS-carded.
Can staff carry on working while you’re here?
In most cases, yes. Phased work can be planned so areas stay in use, with each area protected and signed.
What do you charge?
We don’t publish prices, as every site differs. With photos or drawings, we can give you a fixed quote.
Does the weather affect joint sealing?
Weather matters for any external joint. Indoor joints can usually carry on regardless.
Can you follow the specification on our project?
Yes. We follow the specification, along with the manufacturer’s installation guidance, and any queries are raised before we start.
How do you choose the sealant?
Where there’s a specification, we use the product it names. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
Should maintenance staff do it?
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint.
Surface by surface
Brickwork and blockwork joints
Long brick and block elevations have movement joints at intervals. They take a low-modulus sealant with a movement class to suit laid over backing rod at the correct depth.
Internal floor movement joints
Warehouse and retail floors have saw-cut induced joints and construction joints. A semi-rigid filler is common in trafficked industrial floors and a flexible sealant where the joint moves more.
For managing agents and facilities managers
Whether you’re a managing agent, a property factor or an owner’s representative: send the details, accept a fixed quote, and we carry out and guarantee the work. Keys, access and contacts can be agreed in advance.
Housing associations and managing agents often need work done across blocks and communal areas. Work can be phased so residents and staff keep access throughout, and each stage is agreed with your contact.
Traffic, movement and joints around Auchenblae
Auchenblae is in the east of Scotland, which is drier than the west. Cold winters and gritting are hard on any yard or deck joint left open. Autumn is a sensible time to seal them.
Around Auchenblae, each joint gets a filler or sealant matched to what crosses it and how much it moves. Once a joint near Auchenblae opens up, grit and water get in and the edges start to break; we’ll tell you if the edges need repairing first.
Auchenblae is about 13 miles north of Montrose, in Aberdeenshire. We cover commercial sites throughout Auchenblae, for single jobs and planned programmes alike. Our Aberdeenshire coverage takes in 179 places. Our Aberdeen page has more on work in that area (21 miles or so).
Postcode districts covered here: AB30 for movement joints. Streets here include High Street, Mackenzie Avenue and Hillview Road. Close to Auchenblae, our area also takes in Fordoun (2 miles south-east), Glenbervie (3 miles north-east), Drumlithie (4 miles east), Laurencekirk (5 miles south) and Arbuthnott (5 miles south-east). Further afield, our area takes in Stonehaven (10 miles north-east), Banchory (11 miles north), Newtonhill (14 miles north-east), Inverbervie (7 miles south-east), St Cyrus (9 miles south) and Johnshaven (8 miles south-east).
Around Auchenblae
For rail, the closest station is Laurencekirk station, roughly 4.4 miles south of the centre. Well-known places in the area include Drumtochty Castle (1.9 miles north-west). Green spaces nearby include Herscha Hill.
Places near Auchenblae
What else we do in Auchenblae
Leave it or put it right?
Leaving a failed movement joint rarely stays a small problem. Water and debris get in, the joint jams and the edges spall. Resealing early keeps the work to sealant. For buildings near Auchenblae, dealing with all the failing joints at once saves return trips. Photos of each area help us quote the whole job.
What a job costs comes down to how many linear metres there are, how much old material needs removing and the access. Call for a fixed quote once you have the details.
Why us?
- CSCS-carded applicators
- Constructionline member for supplier checks
- Products installed to the manufacturer’s instructions
- Commercial sealant work since 2005
Read what affects the cost and our accreditations.