Expansion and movement joint sealing in Ashford, Hampshire
Our CSCS-carded applicators take on expansion and movement joint sealing in walls, decks and floors in Ashford and the surrounding area. Send details for a fixed quote.
- Movement joints with split or torn sealant
- Sealant pulling off the joint face
- Expansion joints filled with dirt and stones
Expansion joint sealing across Ashford
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Quoting for work in Ashford
The price varies from site to site. Expect it to depend on:
- Whether old sealant has to be cut out first
- Specialist products, such as fire-rated or hygienic sealants
- How much there is to seal
- Distance, for remote addresses
Access can matter as much as the joints themselves: joints within easy reach take less time than ones that need access equipment. Mention the access as part of your enquiry.
What to include in your enquiry
To price the job accurately, we need a clear picture of the site. Send us:
- The asbestos register, for older buildings
- Approximate linear metres or a joint schedule
- Access details, including height
- Clear photographs of the problem areas
Let us know the site, the scope and your timescale, and a fixed quote will follow. To get it moving, give us a call on 01277 525 020 or send photos by email.
Expansion joint sealing for commercial buildings in Ashford
If you need expansion joint sealing in Ashford, start with photographs and joint lengths. Send them through our quote form, and we’ll arrange a site visit if needed. To discuss the joints first, phone 01277 525 020 or email us. We work on blockwork control joints, brickwork movement joints and precast concrete panel joints, and the failures we are asked to look at most are water getting into the wall through a failed joint and hardened, cracked sealant on exposed facades. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Ashford is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.
For a site near Ashford, measurements and photos up front mean one trip where possible, with the right materials on hand. Note joint widths and the traffic that uses them, and we will take it from there.
The 12-month guarantee covers our workmanship: the preparation, the sealing and the tooling. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Location
- Ashford (SP6)
- Wider area
- Hampshire
- Cover
- 12 months on our workmanship
- Price
- Quoted before any work starts
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Do you need expansion joint sealing in Ashford?
When the movement exceeds the sealant’s capability, the bead tears. A joint that’s too narrow for the movement, or a product with the wrong movement class, will split through the middle. Resealing like for like often fails the same way, so we check width and movement before quoting.
Any of the following is a good reason to get the joints checked over:
- Movement joints with split or torn sealant
- Hardened, cracked sealant on exposed facades
- New sealant over old, now failing
- Joints where the bead has lost adhesion
Hospital campuses such as Fordingbridge Hospital, 0.6 miles to the east of Ashford, grow in stages, leaving movement joints wherever new blocks meet old.
What to look for in a quote
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- Their pre-qualification and accreditations
- Can the work be phased to keep areas open?
- How they handle RAMS and site documents
How the job changes by surface
Car park decks and ramps
Failed deck joints often show as leaks on the level below. We strip the old seal, prepare the edges and seal again flagging broken edges along the way.
Concrete and precast panel joints
Precast and concrete panel joints move daily. We use a sealant classed for the movement, laid over backing to depth.
Doing it in-house
Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
Redoing a failed joint usually costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
Also near Ashford
What else we do in Ashford
Work for main contractors and building owners
Agents, factors and owners’ representatives all follow the same route: send details, get a fixed quote, we seal, guaranteed. We can agree access arrangements and keyholder contacts beforehand.
Main contractors use us as their sealant subcontractor, on new build and refurbishment alike. Programme, specification and site rules come first, and our applicators hold CSCS cards.
Where floor joints take the most wear near Ashford
Rainfall across the South East, Ashford included, is lower than in many parts of the UK. Even so, yard and car park joints are only sealed when they’re dry and clean, and winter de-icing salt on car parks and ramps works into any open joint. Less than 3 miles from Ashford there are at least three named estates and business parks. That puts plenty of warehouse floors, service yards and car parks close by, all with joints under traffic.
At places like Arch Farm Industrial Estate (0.7 miles north-east of Ashford), joints are sealed a section at a time so operations carry on. For a school such as Fordingbridge Junior School, playground and building joints can be done in the holidays.
Ashford is in Hampshire. Anywhere in SP6, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. We work across 723 places in Hampshire, large and small. We also cover Southampton, around 18 miles from Ashford.
We take on movement joints across the SP6 postcode area, whatever the building. Among the streets we cover are Station Road, Rookwood Gardens and Ashford Close. Just outside Ashford, we also work in Sandleheath (1 mile west), Alderholt (2 miles south-west), Damerham (2 miles north-west), Rockbourne (3 miles north-west) and Broxhill (3 miles west). Nearby towns on our patch include Totton (13 miles east), Romsey (15 miles east), New Milton (14 miles south-east), Ringwood (6 miles south), Barton on Sea (14 miles south-east) and Ashley (14 miles south-east).
Landmarks near Ashford
Recent enquiries here include premises near The Burgate School and Sixth Form and The Ship Inn. Other landmarks nearby include Godshill Castle Hill (2.1 miles north-east) and Fordingbridge Museum (0.7 miles east). The countryside around Ashford includes Linbrook Lake and Blashford Lakes.
How a job runs
We begin with a short walk round with whoever looks after the building, agreeing which joints are in scope, where to start and what must stay open. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. Rural sites near Ashford may need directions, gate codes or a contact on site. Add it to your enquiry and we’ll build it into the plan.
- We start with photographs, approximate lengths and any drawings, visiting where needed.
- Joint widths and expected movement are checked against what the sealant can take.
- Every joint is cleared of the failed seal and any grit packed into it.
- Any broken arrises or friable edges are flagged before work goes further.
- The right sealant goes in at the right depth, bonded to the two sides only.
- Each area is handed back after its cure time, under our 12-month guarantee.
What we need from you
- Send your site hours and access windows
- Have the specification and drawings to hand
- For older buildings, check the asbestos register before work
Ask for a quote
Pricing a project or setting a maintenance budget? Send the scope and any drawings, and we’ll return a fixed quote you can plan around. For a chat about it beforehand, speak to us on 01277 525 020 or send photos by email.
Advice
Your questions answered
Can you work on a hospital site such as Fordingbridge Hospital?
Yes. Healthcare sites are among the places we work. Each area is agreed with the ward or department and the estates team in advance.
Will you take on work at estates like Fordingbridge Business Park, close to Ashford?
Yes. Estates, retail parks and business parks around Ashford, Fordingbridge Business Park among them, are all within reach. A few photographs and the unit address let us price the work.
Are you insured?
Yes. We’re fully insured, including public liability cover.
What’s the quickest route to a quote?
You can use the quote form on this site; alternatively, call the office on 01277 525 020 or email drawings and photos. Include photographs or drawings if you have them.
What hours do you work?
The office is staffed Monday to Friday, from 8am until 5pm. Let us know your site hours and access windows, and the work will be planned around them.
Do you take on multi-site work?
Yes. A group of buildings can go on one quote, and you deal with one contact throughout across South East England, Greater London and Scotland.
Which product is best for expansion joints?
Movement capability matters most, classified under BS EN ISO 11600. Hybrid or MS polymer products suit some mixed-material joints.