Expansion Joint Sealing in Arisaig
Need expansion joint sealing in Arisaig? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Expansion joints filled with dirt and stones
- Expansion joints split through the centre of the bead
- Spalled or broken joint edges in floors and decks
Expansion joint sealing in Arisaig
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
On site: what to expect
We bring the products specified for the job, along with primers and backing rod. Joint faces are cleaned back to sound, dry surfaces, primer goes on where the manufacturer specifies it, and the sealant is tooled off neatly. Travel to smaller Scottish places like Arisaig is planned so the job is finished in one visit where possible, which is why we ask for photographs and a full list first. External joints need a dry spell as well.
- Photos, joint lengths and drawings come to us, or we visit.
- We compare each joint’s width with the movement and the sealant’s capability and tell you if the design looks wrong for the movement.
- Every joint is cleared of the failed seal and any grit packed into it.
- Edges are checked, and we tell you if any need repairing before sealing.
- A sealant suited to the movement and traffic is laid to depth and tooled.
- Each area is handed back after its cure time, under our 12-month guarantee.
Before we start on site
- Share your working hours and any access restrictions
- Flag any permit to work we will need
- Have the specification and drawings to hand
Ask for a quote
We quote a fixed sum against the scope you give us, so the cost is agreed before work starts. To ask for one, speak to us on 01277 525 020 or send details through our quote form.
Advice
How we handle expansion joint sealing in Arisaig
Mastic Doctor has sealed movement joints since 2005, for main contractors, FMs, managing agents and building owners. CHAS accredited, Constructionline member, CSCS-carded applicators and five million pounds of public liability insurance. Workmanship is backed by our 12-month guarantee. Site teams most often ask us about spalled or broken joint edges in floors and decks and expansion joints split through the centre of the bead, on blockwork control joints, podiums and floor movement joints and precast concrete panel joints. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: in Arisaig, that means joint design, primers and backing rod as standard.
Around smaller Scottish places like Arisaig, slabs needing attention are often in agricultural buildings, workshops, schools and hotels. Slabs and yards take vehicles, rain and frost.
Our workmanship is guaranteed for 12 months, wherever the site is. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Place
- Arisaig (PH39)
- Wider area
- Highland
- Guarantee
- A 12-month guarantee
- Price
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Maintenance after handover
Once the work is signed off, a little attention goes a long way:
- Reopen bays and walkways only after the stated cure time
- Report split or peeling joint sealant early
- Keep product details with the building records for the next reseal
- Plan racking layouts so feet don’t land on a joint
Snow ploughs and scrapers catch on joint lines. Raising blades over joints where possible protects the seal.
Rain gets into walls through torn brick and block movement joints. It can surface inside as damp a long way from the joint. Catching it early keeps the water outside.
Other services in Arisaig
Common questions from Arisaig clients
Can being near the sea in Arisaig affect the sealant we need?
It can. Coastal exposure works external joints harder than inland weather. Product choice and preparation matter more, and sea-facing elevations are worth inspecting more often.
Is Arisaig too small for you to travel to?
No. Small places get the same service as large ones. We cover the whole of Scotland. Good photographs up front let us bring everything on the first visit.
What causes movement joint sealant to fail?
Most often the movement is too much for the product or the joint width. That’s why we check width, depth and movement class before quoting.
What if the joint edges are damaged?
Broken arrises have to be put right before resealing. Sealing over them leads to early failure.
Do you offer coloured sealant?
Often, yes. Sealants are made in a wide range of standard colours, and matching to RAL references or nearby finishes is commonly requested. We will confirm the colours available for the specified product.
How long before the joints can be used?
We will confirm how long the chosen product needs to cure, and sign any area that should be left alone.
How long do sealant joints last?
There isn’t a single answer, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular inspection is the best way to catch problems early.
Work for main contractors and building owners
Hotels, schools, healthcare sites, offices and retail units book us directly too. We plan around the way the building is used, so guests, pupils, patients or staff are disturbed as little as possible.
Housing associations and managing agents often need work done across blocks and communal areas. Work can be phased so residents and staff keep access throughout, with each stage agreed with your site contact.
Expansion joint sealing in Arisaig: the local picture
Arisaig lies within about 1 mile of the sea. Open joints in coastal car parks and yards let in salt-laden water as well as grit, so it pays to keep them sealed. The west of Scotland, where Arisaig is, gets more rain than the east. Open joints in external slabs take a lot of water. Outside joints are sealed in dry spells, so dates have some give.
In and around Arisaig, the right filler or sealant for each joint depends on the traffic and the movement it takes. A joint near Arisaig that has lost its sealant lets in water and grit, and the edges suffer next; we’ll tell you if the edges need repairing first.
Arisaig (Gaelic: Àrasaig) is in Highland. Arisaig sits inside our coverage, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Our Highland coverage takes in 256 places, large and small.
Work on movement joints is covered throughout PH39, whatever the building. We cover commercial and managed buildings on Station Road, Creag Mhor Gardens and Canon Gillies. Close to Arisaig, our area also takes in Glenancross (3 miles north), Morar (4 miles north), Mallaig (7 miles north), Ardvasar (10 miles north) and Armadale (11 miles north). Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so mention the location when you call 01277 525 020 or email a schedule or drawings.
Near you in Arisaig
There’s a railway station in Arisaig itself: Arisaig station. Well-known places in the area include Land (under half a mile south). The countryside around Arisaig includes Loch nan Eala.
What sets the cost
Each job is priced on its own details. The main factors are:
- The product specified
- How accessible the joints are
- Distance, for remote addresses
- Phasing around occupants
Quantities, awkward access and phased working all shape the price. So do site requirements such as inductions and permits.
Sending details for a quote
Diagnosis starts before we arrive. Let us know:
- When you need the work done
- Access details, including height
- Photos of the joints, close up and from further back
- What the building is and how it’s used
Need a figure for a tender or a budget? Send the scope and any drawings, and we will return a fixed quote you can plan around. For a chat about it beforehand, call the office on 01277 525 020 or send details through our quote form.
Honest limits
A few problems need another trade or a different fix, and we say so rather than covering them up:
- A joint that has to be widened or re-detailed before it can work
- Structural movement beyond what the joints were designed for (that needs a structural engineer)
- Proprietary pre-formed expansion joint systems
If you’re not sure, just phone 01277 525 020 or send details through our quote form and we’ll give you a straight answer.
Joints and surfaces we work on
- Cladding panel joints
- Podiums and floor movement joints
- Precast concrete panel joints
- Brickwork movement joints
- Car park decks and ramps
- Blockwork control joints
Should maintenance staff do it?
Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and our CSCS-carded applicators are used to working under those rules.
Some joints are best left to specialists: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong usually costs more in the end than doing them right.