South East England and London
Expansion Joint Sealing in Southend-on-Sea
Expansion joint sealing in all 11 towns and villages of Southend-on-Sea, done properly, with a fixed quote before we start and a 12-month guarantee.
Expansion Joint Sealing across Southend-on-Sea
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Expansion joint sealing in every part of Southend-on-Sea
Expansion and movement joint sealing in walls, decks and floors. Choose your town from the list to see local details, and call or email us for a quote.
Biggest towns in Southend-on-Sea
More services in Southend-on-Sea
- Coloured and colour-matched sealant
- Industrial and floor joint sealing
- Commercial washroom and wet-area sealing
- Commercial sealant contractors
- Fire-rated sealing and fire stopping
- Facade and window perimeter sealing
- Construction and new-build mastic
- Mastic sealing for building owners and managing agents
Postcode districts
About expansion joint sealing in Southend-on-Sea
Mastic Doctor has sealed movement joints since 2005, for main contractors, FMs, managing agents and building owners. Our applicators are CSCS-carded, we’re CHAS accredited and a Constructionline member, and we carry five million pounds of public liability insurance. Workmanship is backed by our 12-month guarantee. Most enquiries involve sealant peeling off one face of the joint and rain penetration at brick or block movement joints, on precast concrete panel joints, brickwork movement joints and car park decks and ramps.
Where the site stays busy, the work is phased so only one area is out of use at a time. Each section is protected, cleaned back and sealed before we move to the next.
- First, the joints are inspected for width, movement and the type of failure.
- You get a fixed quote with the product and its movement capability stated.
- The failed seal is removed and both faces are cleaned until sound and dry.
- Backing rod goes in at the right depth, or bond-breaker tape where the joint is shallow.
- After any primer the maker requires, the bead is applied and tooled so it grips two sides only.
- We check every joint before sign-off, and the work carries our 12-month guarantee.
Pricing in Southend-on-Sea
Whether it’s a single area or a whole estate, the same things set the price: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote and we’ll put a fixed figure on it.
Why appoint us
- Workmanship guaranteed for 12 months
- Specification-led, product-correct work
- Sealing commercial buildings since 2005
- Colours confirmed for the specified product
Ask for a quote
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Send what you have, and we’ll arrange a site visit if anything is unclear.
Near you in Southend-on-Sea
We work on buildings around The Railway Hotel, St Hilda's School and Church of St Mary, among other places. Also close by are Westborough Academy (under half a mile south), Southend High School for Boys (under half a mile north) and Prittlewell Square (1 mile south-east). The closest station to Southend-on-Sea is Prittlewell station, roughly 0.6 miles east of the centre. Well-known places in the area include Southend University Hospital (0.6 miles north-west) and Southend Historic Aircraft Museum (0.9 miles north). Green spaces nearby include Two Tree Island.
Floors, slabs and movement joints across Southend-on-Sea
From Prittlewell, Shoeburyness and Leigh-on-Sea to smaller places, Southend-on-Sea has buildings and slabs with movement joints that need resealing as they age. A failed joint lets in water and debris, and the edges spall soon after.
We work across Greater London and the South East counties, so jobs in Southend-on-Sea are planned with access, loading and parking in mind. Coastal places in Southend-on-Sea often have hotels, guest houses and holiday accommodation with busy seasons, so work is often best planned for quieter months.
Southend-on-Sea: In a school such as Westborough Academy, movement joints in brick, block and hall floors tend to be forgotten until they leak. A campus such as University of Essex (to the south-east of Southend-on-Sea) has long runs of movement joint in its buildings, decks and paving.
Leave it or put it right?
Re-sealing with the same product that failed is often a false economy. A higher movement class, or a design change by the engineer, may be needed, and we will say so before quoting.
Comparing quotes
- Proof of insurance
- Whether old or failed sealant will be cut out, not overlaid
- Whether primer will be used where the manufacturer specifies it
- The terms of the workmanship guarantee
How the quote is worked out
Your fixed quote is built from the real scope. It allows for:
- Distance, for remote addresses
- Whether old sealant has to be cut out first
- The size and state of each joint
- The product specified
What a job costs comes down to the quantity of joints, how much old material needs removing and how the joints are reached. Call for a fixed quote when you’re ready.
What to include in your enquiry
To price the job accurately, we need a clear picture of the site. Useful things to include:
- When you need the work done
- Drawings or a marked-up plan, if available
- Asbestos survey details if the building is older
- The postcode of the building
Specifications, drawings and tender packages are welcome with any enquiry, and we will price against exactly what is specified. Smaller jobs need nothing more than photographs and a few notes.
Keeping the joints sound
For the best life from the joints:
- Look over external and deck joints after a hard winter
- Record the sealant used and the date in the O&M file
- Sweep decks, ramps and floors so grit doesn’t collect in the joints
- Inspect movement joints alongside other routine building checks
Snow ploughs and scrapers catch on joint lines. Raising blades over joints where possible protects the seal and a look at the joints after winter catches any damage.
Rain gets into walls through torn brick and block movement joints. It can surface inside as damp a long way from the joint. Resealing promptly prevents internal damage.
General trades versus a specialist
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong normally costs more in the end than doing them right.
Owners, agents and contractors
Facilities managers want contractors who arrive with the paperwork sorted. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we will confirm them with the quote.
Hotels, schools, healthcare sites, offices and retail units come to us directly as well. We plan around the way the building is used, so guests, pupils, patients or staff are disturbed as little as possible.
FAQs: Southend-on-Sea
How long does movement joint sealing take?
That depends on joint lengths, widths, access and how much old sealant or filler needs removing. As a guide, it typically takes a day or so for a modest run of joints, and longer where decks, ramps or floors are done in phases.
Can the sealant be colour-matched?
That depends on the product. Some ranges offer many colours, others very few, so we’ll confirm the colours available for the specified product with the quote.
Does the weather affect joint sealing?
A wet joint can’t be sealed properly. The work is simply moved to the next suitable day.
Can you handle several sites?
Yes. We take on portfolio and planned maintenance work, with each site phased to suit its occupants.
Who decides which product is used?
The specification comes first, if there is one. If there isn’t one, it comes down to the joint: its movement, its surfaces and what it has to cope with.
Will you just go over the old sealant?
No, never. Sealing over old material is one of the classic causes of early joint failure, so everything comes out first.
Will your applicators have CSCS cards?
Yes. If you need card details for site access, tell us and we will confirm them with the quote.