The Mastic Doctor team standing beside their branded vans outside an office building
West Sussex · England

South Bersted construction mastic

Mastic packages for new-build and refurbishment projects in South Bersted and across West Sussex. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.

  • A long mastic snag list close to completion
  • Internal caulk splitting as the building dries out
  • Failed sealant in an existing building being refurbished
1
Send details
Send the specification, photos or a marked-up plan.
2
Get a quote
A fixed price, with what’s included set out clearly.
3
We seal
The right sealant, to the right depth, neatly finished.
4
Guaranteed
Backed by a 12-month workmanship guarantee.
South East, London & Scotland
CHAS & Constructionline
£5m public liability

Construction mastic across South Bersted

Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.

Contractors’ notes for South Bersted

South Bersted is within about 1 mile of the coast. Schemes this close to the sea see their facade joints tested by wind and rain from the day they’re sealed, so we check the specified product suits the exposure before the first bead. There are a good number of hotels within about 2 miles of South Bersted. When hotels extend or refit, the work is normally squeezed between peak periods, mastic included.

When a school such as South Bersted CofE Primary School is extended or refurbished, the mastic package is often squeezed into the holidays. On a campus such as University of Chichester (Bognor Campus), 0.6 miles to the south-east of South Bersted, new teaching buildings and residences are usually built and refurbished around the academic year.

South Bersted is about 1 mile north-east of Bognor Regis, in West Sussex. Across the PO21 postcode area, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. Across West Sussex, 373 places are covered, South Bersted among them. Sites around Portsmouth have their own page, roughly 18 miles from South Bersted.

We take on mastic packages across the PO21, PO22 and BN14 postcode area, whatever the building. If your site is on Ivy Lane, Hook Lane and Essex Road or close by, we can quote for mastic packages. If your building is just outside South Bersted, we cover Bognor Regis (1 mile south-west), Felpham (1 mile east), Shripney (1 mile north), Aldwick (2 miles south-west) and Flansham (2 miles north-east). A short drive away, we cover Worthing (12 miles east), Chichester (6 miles north-west), Selsey (6 miles south-west), Littlehampton (6 miles east), Rustington (7 miles east) and Storrington (13 miles north-east).

Around South Bersted

Recent enquiries here include premises near The Brooks Local Nature Reserve, The Regis School and The William Hardwicke pub and the streets around them. There’s a railway station in South Bersted itself: Bognor Regis station. Well-known places in the area include Bognor Regis War Memorial Hospital (less than half a mile south) and Bognor Regis Museum (0.8 miles south).

Map of South Bersted © OpenStreetMap contributors

About our construction mastic in South Bersted

We work to the specification and the programme rather than whatever product is to hand. If a product is named, that’s what goes in; any alternative we suggest is put to you before anything changes. Joint widths, backing, primers and tooling follow the manufacturer’s guidance. Most enquiries involve sanitary sealant damaged by following trades and frame perimeters left unsealed or poorly sealed, across floor and skirting junctions, internal decorators’ caulk and window and door perimeters. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, in South Bersted it comes down to the same thing: the right product in a properly prepared joint.

Around places like South Bersted, a lot of construction is the conversion of older buildings, and the sealant at those junctions has to cope with two materials that move differently, in a colour the planners or architect are happy with.

Every job ends the same way: guaranteed. Our workmanship is backed for 12 months, and the quote explains what it covers.

Where
South Bersted (PO21, PO22, BN14)
Region
West Sussex
Guarantee
A 12-month guarantee
Price
Quoted before any work starts
Phone
01277 525 020
Updated
3 November 2026
Mastic Doctor team members lined up next to their branded vans outside an office building

Why deal with it now?

Leaving mastic to whichever trade is fitting the element can look cheaper on paper. The result tends to be uneven finishes and arguments about who should seal what. One mastic subcontractor for the lot keeps it simple. A failed joint lets water into a building whatever its size. Early resealing avoids the damage that follows a leak.

What a job costs comes down to how many linear metres there are, what has to come out first and the access. Call for a fixed quote when you are ready.

Why clients in South Bersted choose us

  • Colour options checked against the specified product
  • Sealing commercial buildings since 2005
  • Workmanship guaranteed for 12 months
  • Joints cleaned back to sound surfaces

Read our cost guide or how we’re accredited.

Maintenance after handover

For the best life from the joints:

  • Get the mastic subcontractor involved early in the programme
  • Ask installers to correct oversized gaps first
  • Keep finished joints away from paint, plaster and scrapers
  • Stick to the specified sealant rather than a generic substitute

Tell the builders’ clean team which areas have new sealant. Scrapers used on frames and worktops can nick or lift a new bead, so stick to soft cloths and gentle cleaners near sealant.

Oversized gaps are a problem better caught early. Sealant stretched over an oversized gap won’t last so packing or adjustment by the installer comes first. We raise them during our first walk of the area.

Surface by surface

Snagging before handover

Snagging is often the final mastic stage. Snags are cleared room by room, cutting out damaged joints and resealing them properly.

Bathrooms, en suites and washrooms

Across a block of flats or a hotel, sanitary sealing is repeated in every room. One applicator team gives the same finish everywhere.

When something else is needed

A few problems need another trade or a different fix, and we say so rather than covering them up:

  • Specifying the product where the designer hasn’t
  • Glazing units that are cracked or misted
  • Rework caused by others damaging completed areas

If you’re not sure, just ring 01277 525 020 or email a schedule or drawings and we’ll give you a straight answer.

Where we work in South Bersted

  • Floor and skirting junctions
  • Window and door perimeters
  • Internal decorators’ caulk
  • Sanitary and kitchen joints
  • Brick and block movement joints
  • Cladding and panel joints

Questions we are asked in South Bersted

Can work at a site such as University of Chichester (Bognor Campus) fit around teaching?

Yes. Education sites typically want the work in vacations or in phases during term, and we plan to suit. Any paperwork you need, from RAMS to our insurance certificate and CSCS details, is confirmed with the quote.

Can you work on a hospital site such as Bognor Regis War Memorial Hospital?

Yes, hospitals are one of the sectors we cover. The estates team’s permit system and infection-control rules come first, and the work is planned around them.

What if there’s asbestos in the old mastic?

Some older mastics, especially in pre-2000 buildings, can contain asbestos. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and work stops until any suspect material has been tested. Removing asbestos is a job for asbestos specialists, not us.

Do you cover South Bersted?

Yes. South Bersted is in our area, within our coverage of Greater London, South East England and Scotland. To discuss a job, speak to us on 01277 525 020 or email us.

Is it fine to apply new sealant on top of old?

No, never. Sealing over old material is one of the classic causes of early joint failure, so it all comes out first.

Is colour matching possible?

In many cases, yes. Sealants are made in a wide range of standard colours, and matching to RAL references or nearby finishes is commonly requested. We’ll confirm the colours available for the specified product.

Can you fit around our programme?

Our work is sequenced around the programme. Each plot, floor or elevation is sealed when it’s ready.

Our process

Tell us your site hours and access windows and we will plan around them. While we’re working, the area stays contained and tidy, and we check in with your contact before moving on to each new area. Work in places the size of South Bersted is planned as a single visit where we can. Photos with rough sizes let us arrive with everything needed.

  1. We walk the site or review drawings to understand the package.
  2. You receive a fixed quote covering scope, products and sequence.
  3. Paperwork is agreed and applicators are inducted on site.
  4. Sealing follows the programme as areas are released.
  5. Any frame gaps or issues outside our scope are flagged to the site team.
  6. Final snagging is completed and the 12-month guarantee applies.

What we need from you

  • Point out any areas we must not close
  • Let us know about inductions and permits
  • Send asbestos survey details if the building is pre-2000

Ask for a quote

Tell us about the building, the joints and when you need the work done, and we will put a fixed quote together. To get it moving, ring 01277 525 020 or email a schedule or drawings.

Ask for a quote

Read more

Common problems we fix in South Bersted

On construction sites, joints normally fail early because of when they were sealed, not what was used. Sealing before decorators, flooring or other trades have finished leaves joints exposed to damage, and the joint has to be redone.

If one of these sounds familiar, it’s time for a closer look:

  • Internal caulk splitting as the building dries out
  • Mastic snags holding up handover
  • Oversized or tapered gaps around new frames
  • Existing joints on a refurb that need cutting out and resealing

New units and refits on sites such as Durban Road Industrial Estate (to the north of South Bersted) need their panel and perimeter joints sealed to the specification.

Comparing quotes

  • The named product and why it was chosen
  • Do they follow the manufacturer’s priming guidance?
  • How joint depth will be controlled
  • Will failed sealant be removed rather than covered?

Our contractor checklist

Accreditations

Trusted. Accredited. Insured.