Restalrig construction mastic
Our CSCS-carded applicators take on mastic packages for new-build and refurbishment projects in Restalrig and the surrounding area. Send photos or drawings for a fixed quote.
- Different trades sealing to different standards
- Existing joints on a refurb that need cutting out and resealing
- Snag items on joints that need redoing before handover
Construction mastic in Restalrig
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Surface by surface
External facade and movement joints
Movement joints in the facade are sealed with a product suited to the expected movement. We set the depth with backing rod to avoid three-sided adhesion.
Snagging before handover
The last pass before handover is where mastic snags are cleared. We can work through the snag list area by area.
Construction mastic in Restalrig
Getting a subcontractor through site induction should be simple. Our applicators are CSCS-carded, and we are CHAS accredited and a Constructionline member, and we are fully insured. RAMS, an insurance certificate and CSCS details can be confirmed with the quote if you tell us what you need. Most enquiries involve mastic snags holding up handover and perimeter gaps outside the sealant’s range, on window and door perimeters, sanitary and kitchen joints and internal decorators’ caulk. Whoever orders the work in Restalrig, the brief is normally the same: a clear scope, tidy work and joints that don’t fail again.
Construction in Scotland’s cities is a mix of new build and work to existing stone buildings. Building warrants and the Scottish technical handbooks set the standard, and the mastic follows the specification.
A 12-month guarantee applies to all our work. Should something we installed fail, ring 01277 525 020 or email the details over and we’ll come back to it.
- Place
- Restalrig (EH7, EH8, EH6)
- Wider area
- Edinburgh
- Cover
- 12 months on every job
- Quotes
- A fixed quote before we start
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Towns and villages near Restalrig
What else we do in Restalrig
Building and refurbishing in Restalrig
Restalrig is within about 1 mile of the coast. Facades and window perimeters on coastal schemes take more wind-driven rain, and salt air nearer the shore, so joint design, primers and product choice deserve extra care. Projects in Restalrig follow Scotland’s building regulations, with the local authority acting as verifier. Our job is to seal to that specification.
Projects at colleges like Royal College of General Practitioners Edinburgh, 1.9 miles to the west of Restalrig, tend to run to term dates, so the mastic is planned tightly. For a contractor working at a hospital such as Royal Infirmary of Edinburgh (Little France) (2.7 miles south of Restalrig), perimeter and facade sealing is planned around patients and deliveries.
Restalrig is about 2 miles north-east of Edinburgh, in Edinburgh. Any commercial site in Restalrig is covered, for single jobs and planned programmes alike. 174 places across Edinburgh fall within our area, Restalrig among them.
Business premises anywhere in EH7, EH8 and EH6 are within our area for mastic packages. Among the streets we cover are Dalgety Road, Lochend Road and Loaning Road, and sites on any of them can send details for a fixed quote. Nearby places we also cover include Jock's Lodge (1 mile south), Lochend (1 mile west), Meadowbank (1 mile south-west), Piershill (1 mile south-east) and Willowbrae (1 mile south). Bigger towns within reach include West End (3 miles west), West Coates (3 miles west), Merchiston (3 miles south-west), Queensferry (10 miles west), Comely Bank (3 miles west) and Southhouse (4 miles south).
Landmarks near Restalrig
Locally, jobs take us to sites close to McDonald Road Library, Public House and Lochend Park and the streets around them. Restalrig’s nearest station is Edinburgh Waverley station, about 1.6 miles west. Well-known places in the area include Edinburgh Castle (2.1 miles west) and St. James Centre (1.5 miles west). The countryside around Restalrig includes Whinny Hill and Dunsapie Loch.
Keeping the joints sound
After handover, these steps help:
- Ask for joint and product checks before the package is urgent
- Keep product details for future maintenance
- Plan external elevations with the weather in mind
- Check frame gaps are within the sealant’s range before sealing
Brief the sparkle clean so they don’t scrape the new joints. Blades and abrasive pads are the commonest cause of damage at the final clean.
A missed perimeter seal on one window can wet the reveal and the plaster inside. On a new building that means remedial work after decorating and possibly a delayed handover. A check of every frame before decorators start is worth the time.
How a job runs
Tell us your site hours and access windows and we will plan around them. While we’re working, the area stays contained and tidy, and we check in with your contact before moving on to each new area. In a Scottish city, kerbside space and loading need planning, especially near the centre. Tenement closes, shared stairs and factor approvals may also be involved.
- We walk the site or review drawings to understand the package.
- A fixed quote sets out scope, products and phasing.
- Paperwork is agreed and applicators are inducted on site.
- Sealing follows the programme as areas are released.
- Problems we find, such as oversized gaps, are raised straight away.
- Final snagging is completed and the 12-month guarantee applies.
Preparing the site
- Clear stock, furniture or equipment away from the joints
- Have the specification and drawings to hand
- Tell staff and tenants when we will be in
Ask for a quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. To take the first step, give us a call on 01277 525 020 or send photos by email.
Advice
When to bring in a specialist
For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint.
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
What we can’t put right
Before quoting, we check that sealant is the right answer. It won’t put right:
- Joint design decisions that belong to the architect or engineer
- Defective windows, doors or glazing units (the supplier or installer’s job)
- Deciding which fire-stopping product a penetration needs
If you are not sure, just call 01277 525 020 or email drawings and photos and we’ll give you a straight answer.
Joints and surfaces we work on
- Sanitary and kitchen joints
- Cladding and panel joints
- Window and door perimeters
- Brick and block movement joints
- Floor and skirting junctions
- Internal decorators’ caulk
Common problems we fix in Restalrig
Most mastic snags on new buildings come from sequencing rather than product. Sealing before decorators, flooring or other trades have finished leaves joints exposed to damage, and the joint has to be redone.
What tends to prompt an enquiry:
- Missed perimeter joints on a new elevation
- Cracks opening in caulked internal joints
- Early adhesion failures on new external joints
- Old sealant on a refurbishment that needs stripping before new work
On a campus such as University of Edinburgh - Holyrood Campus (1.3 miles south-west of Restalrig), new teaching buildings and residences are usually built and refurbished around the academic year.
Before you book anyone
- Do they follow the manufacturer’s priming guidance?
- Will failed sealant be removed rather than covered?
- What level of public liability insurance do they hold?
- What the guarantee covers, and for how long
Questions we are asked in Restalrig
Would you work within a site like Royal Infirmary of Edinburgh (Little France)?
Yes, hospitals are one of the sectors we cover. We follow the site’s permits, sign-in and infection-control procedures in every area.
Do you cover business parks and estates near Restalrig, such as Albion Business Centre?
Yes. Our area takes in Restalrig and its surroundings, with estates and business parks such as Albion Business Centre included. Photos and a short description are enough for a first look.
How long does a job like this take?
The duration is planned around your programme and the access we’re given. You will have an expected duration with the quote.
Can you clear a mastic snag list before handover?
Yes. Send the snag list or photos and we’ll price it, then clear it to your programme.
Do your applicators hold CSCS cards?
We’re CHAS accredited and a Constructionline member, and our applicators hold CSCS cards. We confirm any paperwork you need with the quote.
Will you stick to the specified products?
The specified product is what goes in. If we think an alternative would suit better, we put it to you first.
Do you take on multi-site work?
Yes. A group of buildings can go on one quote, with one point of contact across South East England, Greater London and Scotland.