Coloured Sealant in Restalrig
We carry out coloured and colour-matched sealant for visible joints in Restalrig. Send photos or drawings for a fixed quote.
- Discoloured joints on a visible elevation
- White or grey sealant that clashes with the finish
- Stained or mouldy coloured joints in washrooms
Coloured sealant near Restalrig
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Coloured sealant for commercial buildings in Restalrig
Where finishes matter, a white or grey bead in the wrong place stands out. Our coloured sealant work blends joints into the surrounding materials, from powder-coated frames to stone and brick, for clients in Restalrig. The right product for the joint always comes first, then the colour. If you are dealing with marked sealant in hotel bathrooms and a run of joints in mismatched shades, we can put it right. For commercial sealant work in Restalrig, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.
Much of the older commercial stock in Scotland’s cities is sandstone or, in Aberdeen, granite. Stone needs a neutral-cure sealant suited to it and a colour that sits quietly against the masonry.
Every job ends the same way: guaranteed. Our workmanship is backed for 12 months, and we explain exactly what that covers when we quote.
- Place
- Restalrig (EH7, EH8, EH6)
- Wider area
- Edinburgh
- Cover
- 12 months on every job
- Price
- A fixed quote before we start
- Phone
- 01277 525 020
- Updated
- 3 November 2026
From enquiry to sign-off
Before we leave any area, the masking comes off, the area is cleaned and every joint is checked with your site contact. If an area should be left alone while the sealant cures, we say how long and put signs out. University, hospital and office estates in Scotland’s cities have their own permits, inductions and sign-in rules. Tell us the rules and we’ll work to them.
- The sealant type is chosen for the joint first, then the colour.
- We compare your RAL reference or sample with the colours made for that sealant.
- Where colour is critical, a sample bead can be agreed in a discreet spot.
- We remove the existing bead, clean the faces and set the depth.
- The coloured sealant is applied and tooled with clean, masked edges.
Getting the site ready
- Move anything stored against the joints
- Let us know about inductions and permits
- Tell staff and tenants when we’ll be in
Request a quote
Need a figure for a tender or a budget? Send the scope and any drawings, and we will return a fixed quote that you can work with. If you have questions first, call the office on 01277 525 020 or send photos by email.
Related advice
Work for main contractors and building owners
FMs need a contractor who is easy to get on site. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we will confirm them with the quote.
For main contractors, we work as the sealant subcontractor, on new build and refurbishment alike. Programme, specification and site rules come first, and our applicators hold CSCS cards.
What sets the cost
The price varies from site to site. Expect it to depend on:
- How accessible the joints are
- Whether old sealant has to be cut out first
- Specialist products, such as fire-rated or hygienic sealants
- The site’s rules and procedures
Larger quantities, tricky access or phasing all shape the price. So do site requirements such as inductions and permits.
What to include in your enquiry
For an accurate fixed quote, we need a clear picture of the site. Send us:
- Whether the building will be occupied during the work
- Any dates the work must fit around
- The site address and postcode
- Drawings or a marked-up plan, if available
Tell us about the building, the joints and when you need the work done, and a fixed quote will follow. To get it moving, speak to us on 01277 525 020 or email drawings and photos.
When something else is needed
Honesty saves time and money. Fresh joints won’t solve:
- Paint over sealant on joints that move too much
- Cleaning or repairing the surrounding finishes
- Finishes that change colour from one area to another
Not sure which it is? You can phone 01277 525 020 or email the details over and we will tell you honestly before you book.
Joints and surfaces we work on
- Natural stone and brick
- Cladding panels
- Office fit-out finishes
- Powder-coated and anodised frames
- Hotel bathrooms and public areas
- Shop-fit joinery and counters
Common questions from Restalrig clients
Can you work at a site such as Albion Business Centre, by Restalrig?
Yes. We cover Restalrig and the area around it, including industrial estates, business parks and retail parks such as Albion Business Centre. Send details of the unit and the work through our quote form for a quick quote.
Does a hotel in Restalrig need to shut while its sealant is renewed?
Rarely, if ever. We take a few rooms out at a time. Tell us your quiet periods and access windows and we will plan around them.
Can weather delay the job?
It can, for external work. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so we watch the forecast and rearrange outside work if we have to. Internal work is far less affected.
Will you quote for a small job?
Single areas, one-off repairs and whole buildings are all quoted the same way: details, then a fixed price, then sealing, then a 12-month guarantee.
Will the sealant be an exact match to our finish?
No. An exact bespoke match isn’t something we can promise. Sealants come in a wide range of standard colours, and we will confirm the colours available for the specified product for your approval.
What if there’s asbestos in the old mastic?
The duty to manage asbestos sits with the building’s dutyholder, so we’ll ask for the register before work on an older building. If anything suspect turns up, we stop until it’s tested.
Is Restalrig in your area?
Yes. Restalrig falls within our area, and the simplest way to start is to speak to us on 01277 525 020 or use the quote form.
Working on commercial sites near Restalrig
Restalrig is within about 1 mile of the coast. Shopfronts, frames and external joints on commercial buildings there take wind-driven rain and, closer to the shore, salt in the air. Sea-facing elevations are typically where failed joints show first. There are eight care or nursing homes within about 2 miles of Restalrig. Care settings have kitchens, lounges and corridors where joints need to be neat and easy to clean; colours can be chosen to suit the interior.
Parks like Albion Business Centre (0.5 miles west of Restalrig) see tenants come and go, and every move-in brings joints to seal. Occupiers with premises at both Albion Business Centre and Meadowbank Shopping Park could have the sealant at each handled under one quote.
Restalrig is about 2 miles north-east of Edinburgh, in Edinburgh. Looking for coloured sealant in Restalrig? We can help. Restalrig is one of 174 places we cover in Edinburgh for colour-matched joints.
Business premises anywhere in EH7, EH8 and EH6 are within our area for colour-matched joints. We cover commercial and managed buildings on Dalgety Road, Lochend Road and Loaning Road and the roads nearby. We also cover Jock's Lodge (1 mile south), Lochend (1 mile west), Meadowbank (1 mile south-west), Piershill (1 mile south-east) and Willowbrae (1 mile south) for colour-matched joints. Nearby towns on our patch include West End (3 miles west), West Coates (3 miles west), Merchiston (3 miles south-west), Queensferry (10 miles west), Comely Bank (3 miles west) and Southhouse (4 miles south).
Landmarks near Restalrig
Locally, jobs take us to sites close to McDonald Road Library, Public House and Lochend Park and the streets around them. For rail, the closest station is Edinburgh Waverley station, roughly 1.6 miles west. Nearby you’ll also find Edinburgh Castle (2.1 miles west) and St. James Centre (1.5 miles west). The countryside around Restalrig includes Whinny Hill and Dunsapie Loch.
When to call us in Restalrig
Exposure takes its toll on colour. Sunlight, dirt and pollution can darken, yellow or chalk the surface, so joints that once matched no longer do. A reseal brings the colour back in line.
These are often picked up first by site or facilities staff:
- White or grey sealant that clashes with the finish
- Shop fits that need consistent sealant colours across sites
- Untidy coloured beads with ragged edges
- Old colour-matched joints lifting at the edges
Premises within reach of Edinburgh Waverley station (to the west of Restalrig) often have busy frontages where joints are seen by everyone passing.
Comparing quotes
- Proof of insurance
- Health and safety accreditation such as CHAS
- Can the work be phased to keep areas open?
- Do they follow the manufacturer’s priming guidance?
Keeping the joints sound
A few simple habits keep the new joints working:
- Plan full-run reseals on visible elevations
- Approve a sample bead on high-profile areas
- Use one colour standard across multi-site work
- Avoid abrasive pads on coloured sealant
Colours can soften with light and weathering. That is normal for exposed sealant, and resealing restores the look when the time comes.
Plan resealing of visible joints before they look tired. Replacing them on a schedule keeps finishes looking right over the years.