Mastic contractors in Port na Craig
Mastic packages for new-build and refurbishment projects throughout Port na Craig and nearby, carried out by CSCS-carded applicators. CHAS accredited and fully insured.
- New external sealant already peeling away
- Oversized or tapered gaps around new frames
- Mastic snags holding up handover
Construction mastic in Port na Craig
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Building owners, agents and FMs in Port na Craig
FMs need a contractor who is easy to get on site. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we will confirm them with the quote.
As a CHAS accredited contractor and Constructionline member, we’re straightforward to vet for your supplier list. We’re fully insured, and our insurance certificate can go with the quote.
About our construction mastic in Port na Craig
Site managers want applicators who turn up with the right cards and paperwork. We’re a Constructionline member and CHAS accredited, and every applicator holds a CSCS card, and we are fully insured. RAMS, an insurance certificate and CSCS details can be confirmed with the quote if you tell us what you need. We work on window and door perimeters, brick and block movement joints and cladding and panel joints, and what we are called in for most is internal caulk splitting as the building dries out and bath and shower joints scraped during the final clean. Most enquiries from Port na Craig start with one failed joint and grow into a wider look at the building: we look at the rest while we are there and tell you what we find.
Outside mastic in Scotland needs a dry, frost-clear joint, and in a place like Port na Craig that means watching the forecast. A little flexibility in the programme lets external joints go in on suitable days.
A 12-month guarantee applies to all our work in Perth and Kinross. If an installation problem shows up, give us a call on 01277 525 020 or email a schedule or drawings and we will arrange a return visit.
- Where
- Port na Craig (PH16)
- Wider area
- Perth and Kinross
- Guarantee
- 12 months on every job
- Price
- Quoted before any work starts
- Call
- 01277 525 020
- Last updated
- 3 November 2026
What the job involves on each surface
Kitchens and utility areas
On commercial kitchen fit-outs, hygienic sealants are often specified. We follow the specification and seal to a smooth, cleanable finish.
Bathrooms, en suites and washrooms
Sanitary joints around baths, showers, basins and WCs need anti-mould sanitary silicone. Each joint is prepared, sealed and finished with a neat tooled line and baths are loaded where appropriate before sealing.
On site: what to expect
Working in a building that stays open takes some planning. The work area is signed and kept contained, keep walkways clear and move on in phases so staff and visitors can carry on around us. For work around Port na Craig, we aim for one trip, which is why we ask for photographs and a full list first. Outside work also needs a suitable weather window.
- First we look at the scope on site or from drawings.
- You receive a fixed quote covering scope, products and sequence.
- Site paperwork is confirmed and our CSCS-carded applicators are inducted.
- Sealing follows the programme as areas are released.
- Problems we find, such as oversized gaps, are raised right away.
- Final snagging is completed and the 12-month guarantee applies.
Before we start on site
- Let us know about inductions and permits
- Point out parking and an unloading spot
- Tell staff and tenants when we’ll be in
Quotes
The quickest route to a quote is a few photos and the site postcode. Send them through the quote form, or speak to us on 01277 525 020 or send details through our quote form if you’d rather talk the job through.
Read more
Questions we are asked in Port na Craig
Is Port na Craig too small for you to travel to?
No. Small places get the same service as large ones. Our area covers all of Scotland, cities, towns and islands alike. Where we can, we group nearby jobs to make the most of each trip.
Is hospital work, at somewhere like Pitlochry Community Hospital, something you do?
Yes, healthcare and care buildings are part of our work. We follow the site’s permits, sign-in and infection-control procedures in every area.
Does weather matter for sealant work?
For external joints, yes. Sealant needs a dry joint and a temperature within the product’s range, so damp, frosty or very cold days can stop external work. Inside work is seldom held up.
What hours do you work?
Give us your site hours and any access windows in your enquiry, and we’ll schedule the work to suit. Our office runs Monday to Friday, 8am until 5pm.
Can you follow the specification on our project?
Yes. Include it with the drawings when you ask for a quote, and the quote will be based on it.
Do you need to see the site first?
Many jobs can be quoted from photographs, drawings or a joint schedule. If the job needs a look first, we’ll arrange a visit before quoting.
Can you send site paperwork?
Each site asks for different documents, so list what you need, whether RAMS, insurance or CSCS details, and we’ll confirm with the quote.
Nearby places to Port na Craig
What else we do in Port na Craig
Contractors’ notes for Port na Craig
There are plenty of hotels within about 2 miles of Port na Craig. Hotel refurbishments often run to tight programmes between busy periods, and perimeter and sanitary sealant has to keep up. Port na Craig is on Scotland’s drier eastern side. Cold, damp starts still stop external sealing on some days. We programme around it with the site team.
Hotels like Fonab Castle Hotel (to the west of Port na Craig) rarely close for long, so refurbishment mastic is phased floor by floor. For a contractor working at a hospital such as Pitlochry Community Hospital, less than half a mile north of Port na Craig, perimeter and facade sealing is planned around patients and deliveries. When units on a site such as Fonab Business Park (to the west of Port na Craig) are refurbished or reclad, the panel joints and window perimeters are part of the mastic package.
Port na Craig is about 17 miles north-west of Blairgowrie and Rattray, in Perth and Kinross. Anywhere in PH16, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. We work across 114 places in Perth and Kinross. There’s a separate page for Dundee, roughly 33 miles from Port na Craig.
If you need construction mastic in PH16, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. Buildings on Foss Road, Ferry Road and Bruach Lane are within our area for mastic packages. Main routes into Port na Craig include the A924. Sites close to Port na Craig are covered too, including Pitlochry (1 mile north), Moulin (1 mile north), Grandtully (3 miles south-west), Little Ballinluig (4 miles south-west) and Ballinluig (4 miles south-east).
Local landmarks in Port na Craig
Recent enquiries here include premises near Faskally Forest and Dundarach Hotel. Port na Craig has its own railway station: Pitlochry station. A little further out are Black Castle of Moulin (1 mile north-east) and Atholl Palace Museum (0.6 miles north-east). The countryside around Port na Craig includes Loch na Bà.
After the work
To get the most from the new sealant:
- Stick to the specified sealant rather than a generic substitute
- Note which sealant went where at handover
- Ask for joint and product checks before the package is urgent
- Allow flexibility for external sealing in damp or cold weather
The package carries our 12-month guarantee for workmanship. Damage by others isn’t a workmanship fault which is why protection after sealing matters.
Sanitary joints that fail early become defects soon after occupation. Water gets behind trays, vanity tops and panels. Getting the product and preparation right first time avoids that.
Why act early in Port na Craig
Clearing snags piecemeal is tempting when handover is close. But one planned snagging pass through each area normally clears more for less disruption and saves applicators coming back again and again. We can run snagging as its own phase before handover. In Scotland, wind-driven rain finds a failed joint quickly, and for a smaller place like Port na Craig, a repair visit takes planning, so it’s better to act early.
What a job costs comes down to how many linear metres there are, what has to come out first and how the joints are reached. Call for a quote once you have the details.
What you get with us
- One phone line for London, the South East and Scotland
- Clear, fixed quotes
- Colour options checked against the specified product
- CHAS accredited
Take a look at how commercial sealant jobs are priced or how we’re accredited.
What sealant work can’t fix
Not every problem is a sealant problem, and we’re upfront when that’s the case. These need a different solution:
- Specifying the product where the designer hasn’t
- Damage to finishes by other trades after we have sealed
- Approving fire stopping as compliant
If you are not sure, just call the office on 01277 525 020 or email a schedule or drawings and we will give you a straight answer before you book.
Where we work in Port na Craig
- Brick and block movement joints
- Floor and skirting junctions
- Cladding and panel joints
- Window and door perimeters
- Sanitary and kitchen joints
- Internal decorators’ caulk