The Mastic Doctor team standing beside their branded vans outside an office building
Greater London · England

Construction and new-build mastic in Norwood Green, Greater London

Construction mastic in Norwood Green, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.

  • Frame gaps too wide for sealant alone
  • A long mastic snag list close to completion
  • Failed sealant in an existing building being refurbished
1
Send details
Drawings, photos, a joint schedule or a site visit.
2
Get a quote
One fixed quote covering the agreed scope.
3
We seal
Prepared joints, the specified product, a tidy finish.
4
Guaranteed
Backed by a 12-month workmanship guarantee.
Covering the South East & Scotland
CHAS & Constructionline
Fully insured: £5m PL

Need construction mastic in Norwood Green?

Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.

How we handle construction mastic in Norwood Green

Mastic is often where a new building first shows its quality to the client. A smeared bead round a window or a gap behind a worktop ends up on the snag list. Our aim is joints that pass at the first inspection. If you have failed sealant in an existing building being refurbished and sanitary sealant damaged by following trades, we can put it right, whatever the surface. Whether you call it commercial sealant work, mastic application or joint sealing, in Norwood Green it comes down to the same thing: failed joints cut out, faces prepared and the right sealant laid to the right depth.

The ULEZ covers the whole of Greater London, so contractors’ vehicles on a job in Norwood Green must meet its standards or pay the daily charge. Alongside that, sites normally need booked deliveries and a plan for where materials go.

We stand by our work with a 12-month guarantee. That covers our preparation and application, and we come back if anything isn’t right.

The Mastic Doctor team standing beside their branded vans outside an office building
Location
Norwood Green (UB2, TW5, TW7)
Region
Greater London
Cover
12 months on our workmanship
Price
A fixed quote before we start
Call
01277 525 020
Page updated
3 November 2026

Why deal with it now?

Refurbishments sometimes budget for new windows when the frames are sound and only the seal has failed. If the frame is in good order, cutting out and resealing the perimeter can be all it needs and that’s a far smaller job. We’ll say so if a frame itself is the problem. Failed sealant in a building in Norwood Green can quickly affect neighbours, tenants or the floor below. Putting it right early is less disruptive than dealing with the consequences.

Small jobs and large programmes are priced from the same things: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote and we will put a fixed figure on it.

Why clients in Norwood Green choose us

  • Matching to RAL references, product permitting
  • Fully insured
  • Old sealant cut out, never sealed over
  • Over 20 years of commercial sealing

See what affects the cost and our accreditations.

New build and refits around Norwood Green

A 2-mile radius around Norwood Green takes in a good number of hotels. Hotel refurbishments often run to tight programmes between busy periods, and perimeter and sanitary sealant has to keep up. As part of Greater London, Norwood Green is inside the ULEZ, which applies to every van on site. Add booked deliveries and tight storage, and the mastic package needs planning with the site team.

New wings at hospitals like Ealing Hospital (1.2 miles north-east of Norwood Green) bring long runs of window and panel joints to seal. Hotel extensions and refits, at places such as Heston Hyde Hotel (0.9 miles south-west of Norwood Green), usually run between busy periods, so the sealing is squeezed into short windows.

Norwood Green is about 1 mile south-east of Southall, in Greater London. Anywhere in UB2, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. 764 places across Greater London fall within our area, including Norwood Green. Sites around London have their own page, about 12 miles away.

We take on mastic packages across the UB2, TW5 and TW7 postcode area, for business premises of every kind. For a building on Norwood Road, Stour Avenue and Durham Avenue or nearby, we can quote for mastic packages. You will find Norwood Green on or near the M4 and A3005. Sites close to Norwood Green are covered too, including North Hyde (1 mile west), Heston (1 mile south-west), Osterley (1 mile south-east), Spring Grove (1 mile south-east) and Lampton (1 mile south). Nearby towns on our patch include London (12 miles east), City of Westminster (9 miles east), Marylebone (9 miles east), Kensington (7 miles east), St Pancras (11 miles east) and Shoreditch (13 miles east).

Around Norwood Green

We work on buildings around Inwood Park, The Plough Public House and Heston Community School and the streets around them. The nearest railway station is Southall station, roughly 1 mile north-west. Other landmarks nearby include St Bernard's Hospital (1 mile north-east) and Museum of Army Music (2.7 miles south). For a walk, there’s Garden Lake and Castlebar Hill.

Map of Norwood Green © OpenStreetMap contributors

What the job involves on each surface

Window and door perimeters

Perimeter joints between frames and the structure are the weather line on any new building. We use the specified perimeter sealant, normally a low-modulus neutral-cure silicone and set the depth with backing where needed.

External facade and movement joints

Many facade substrates need a primer before sealing. We prime where the manufacturer specifies and work only when conditions suit.

Your questions answered

Can you work on a hospital site such as Ealing Hospital?

Yes, provided the work is planned with the site’s estates team. We follow the site’s permits, sign-in and infection-control procedures in every area.

Can you work in a London building with booked loading and goods-lift slots?

Yes. Booked loading bays, goods lifts and permit-to-work systems are normal for London jobs. The building manager’s rules go straight into our method. The ULEZ covers the whole of Greater London, which we allow for

Will you just go over the old sealant?

No, never. Overlaying old sealant is a frequent cause of early failure, so everything comes out first.

What happens if the weather stops external sealing?

Outside, the joint has to be dry and the temperature within the product’s limits. Frosty or damp mornings can hold up external sealing so we normally switch to internal work when that happens.

Are you CHAS accredited?

We are CHAS accredited and a Constructionline member, with CSCS-carded applicators. We are also fully insured, with five million pounds of public liability cover.

Can you fit around our programme?

The programme sets the job. Tell us the sequence and we’ll plan applicators around it.

Is colour matching possible?

In many cases, yes. Sealants are made in a wide range of standard colours, and matching to RAL references or nearby finishes is commonly requested. We confirm what’s available for the specified product when we quote.

What we can’t put right

Part of a good diagnosis is knowing where sealant stops. We will tell you if the real problem is one of these:

  • Joint design decisions that belong to the architect or engineer
  • Frames fitted out of tolerance
  • Deciding which fire-stopping product a penetration needs

Not sure which it is? You can call the office on 01277 525 020 or email a schedule or drawings and we will tell you honestly before you book.

Where we work in Norwood Green

  • Cladding and panel joints
  • Sanitary and kitchen joints
  • Window and door perimeters
  • Brick and block movement joints
  • Floor and skirting junctions
  • Internal decorators’ caulk

How a job runs

On arrival, we report to your site contact and complete whatever induction the building runs. Floors, finishes and fittings next to the joints are covered before anything is cut or cleaned, and the work normally takes a day or two on a small fit-out and several weeks on a large multi-storey package. All of Greater London is in the ULEZ, and kerbside space in Norwood Green can be scarce. Let us know about any on-site parking or loading arrangements when you send the job details.

  1. We walk the site or review drawings to understand the package.
  2. A fixed quote sets out scope, products and phasing.
  3. Site paperwork is confirmed and our CSCS-carded applicators are inducted.
  4. We seal plot by plot or floor by floor in line with the programme.
  5. Any frame gaps or issues outside our scope are flagged to the site team.
  6. Final snagging is completed and the 12-month guarantee applies.

Getting the site ready

  • Point out any areas we must not close
  • Clear stock, furniture or equipment away from the joints
  • Flag any permit to work we’ll need

Ask for a quote

Quotes are fixed against the scope you send, so the cost is agreed before work starts. To start the process, call 01277 525 020 or send photos by email.

Get a quick quote

Read more

When to call us in Norwood Green

A new building moves while it dries and settles. Materials lose construction moisture and shrink, which opens up internal joints, particularly where caulk has been used in a joint that moves. Choosing the right product for each joint reduces that.

Common reasons buildings call us in:

  • Caulk cracking where joints are moving more than expected
  • Snag items on joints that need redoing before handover
  • Bath and shower joints scraped during the final clean
  • Oversized or tapered gaps around new frames

When a college such as Great Oaks College (to the south-east of Norwood Green) builds or refurbishes, the mastic package usually has to fit around students and staff.

Questions to ask before you book

  • Their public liability cover
  • How they’ll work around occupants
  • How they handle RAMS and site documents
  • How the joint faces will be prepared and primed

Our contractor checklist

Quoting for work in Norwood Green

Before we quote, we look at:

  • The total length or number of joints
  • Access and working height
  • Site requirements such as inductions and permits
  • Which sealant the job calls for

Every site prices differently: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.

Before you send an enquiry

For an accurate fixed quote, we need to understand the site. Useful things to include:

  • The site address and postcode
  • Drawings or a marked-up plan, if available
  • When you need the work done
  • Any specification or named product

A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Share whatever details you have and we’ll fill any gaps with a visit.

Accreditations

Trusted. Accredited. Insured.