Mastic contractors in Furzeley Corner
Mastic packages for new-build and refurbishment projects throughout Furzeley Corner and nearby, carried out by CSCS-carded applicators. CHAS accredited and fully insured.
- A long mastic snag list close to completion
- Failed sealant in an existing building being refurbished
- Missed perimeter joints on a new elevation
Construction mastic near Furzeley Corner
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Honest limits
A proper diagnosis includes knowing what sealant can’t do. We will tell you if the real problem is one of these:
- Fire-stopping design or sign-off (that’s for the designer, fire engineer and building control)
- Frames fitted out of tolerance
- Defective windows, doors or glazing units (the supplier or installer’s job)
If in doubt, give us a call on 01277 525 020 or email a schedule or drawings and we will say what we think before you book.
Surfaces we seal
- Floor and skirting junctions
- Sanitary and kitchen joints
- Brick and block movement joints
- Window and door perimeters
- Internal decorators’ caulk
- Cladding and panel joints
About our construction mastic in Furzeley Corner
On refurbishments, the mastic package typically includes cutting out old sealant as well as sealing new work. Old beads come out completely, as fresh silicone can’t grip old. New and existing joints then get the same preparation. If you have caulk cracking where joints are moving more than expected and sanitary sealant damaged by following trades, we can put it right, on brick and block movement joints, floor and skirting junctions and internal decorators’ caulk alike. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Furzeley Corner is the same: the right product in a properly prepared joint.
Conversions of older rural buildings near smaller places such as Furzeley Corner bring stone, flint, brick and timber up against new glazing. Those joints need a sealant that suits an uneven, sometimes porous surface, and often a colour chosen for the building.
Whoever the client is, the cover is the same: a 12-month guarantee on our workmanship. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Place
- Furzeley Corner (PO7)
- Wider area
- Hampshire
- Guarantee
- A 12-month guarantee
- Price
- Quoted before any work starts
- Phone
- 01277 525 020
- Updated
- 3 November 2026
After the work
Problems stay small when the joints are checked regularly. Specifically:
- Ask installers to correct oversized gaps first
- Don’t schedule sealing before decorators and flooring are done
- Get the mastic subcontractor involved early in the programme
- Brief the final clean team to avoid blades near sealant
Our 12-month guarantee covers the workmanship from sign-off. The guarantee covers how we sealed, not later damage by other trades.
One unsealed frame can let water into finished internal areas. That normally means redoing finishes in a completed area and possibly a delayed handover. Checking perimeters before internal finishes go on avoids it.
How the job changes by surface
Internal decorators’ caulk
Caulking is often done in a hurry by whoever’s on site. Done properly, it saves decorators time and gives a clean line and keeps the snag list down.
Window and door perimeters
Perimeter joints between frames and the structure are the weather line on any new building. They’re sealed with a low-modulus neutral-cure silicone or another product named in the specification, with backing rod in deeper gaps.
Questions about Furzeley Corner
Is hospital work, at somewhere like Queen Alexandra Hospital, something you do?
Yes, hospitals are one of the sectors we cover. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
Can you work at a site such as Parklands Business Park, by Furzeley Corner?
Yes. We cover Furzeley Corner and the area around it, including industrial estates, business parks and retail parks such as Parklands Business Park. A few photographs and the unit address let us price the work.
Do your applicators hold CSCS cards?
CHAS and Constructionline are both in place, and each applicator is CSCS-carded. We’re fully insured for public liability.
Do you use the sealant named in the specification?
The specification decides the product. Specifications often reference BS EN 15651 or BS 6213.
Who decides which product is used?
If the job is specified, we follow the specification. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
What if there’s asbestos in the old mastic?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. We check the asbestos register before cutting out old sealant in an older building, and if asbestos is suspected, work stops until it’s tested. Removing asbestos is a job for asbestos specialists, not us.
What do you charge?
It depends on the job: quantities, access, the product and any phasing. Call for a quote and we’ll price it properly.
Cost factors for mastic packages
Before we quote, we look at:
- Quantities, in metres or numbers
- Any access equipment needed
- Distance, for remote addresses
- Site requirements such as inductions and permits
Quantities, awkward access and phased working all shape the price. Site requirements like inductions and permits play a part as well.
Sending details for a quote
There’s no need for a formal survey. A few details are enough to get going:
- Anything awkward about access or site hours
- The asbestos register, for older buildings
- The site address and postcode
- The type of building and who uses it
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we’ll fill any gaps with a visit.
From enquiry to sign-off
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Joint faces are cleaned back to sound, dry surfaces, primer goes on where the manufacturer specifies it, and each bead is tooled to a neat concave finish. For a building around Furzeley Corner, tell us how to find it and who will meet us. Send that with the details and we will confirm the plan with the quote.
- First we look at the scope on site or from drawings.
- A fixed quote sets out scope, products and phasing.
- Paperwork is agreed and applicators are inducted on site.
- Sealing follows the programme as areas are released.
- Problems we find, such as oversized gaps, are raised straight away.
- Final snagging is completed and the 12-month guarantee applies.
Preparing the site
- Tell us your opening times and when work is allowed
- Explain the parking and delivery arrangements
- Let us know about inductions and permits
Ask for a quote
Photos, drawings or a schedule of the joints are often enough for a fixed quote. Where a site visit makes more sense, we will arrange one.
Advice
Site staff or a sealant specialist?
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are easy to get wrong without experience.
General builders and handymen seal joints, but it isn’t their main trade. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint.
Nearby places to Furzeley Corner
Also in Furzeley Corner
Mastic packages on Furzeley Corner sites
Furzeley Corner is within about 3 miles of the coast. Coastal exposure means perimeter and cladding joints work harder than on an inland job, so joint design, primers and product choice deserve extra care. Furzeley Corner sits in one of the drier corners of the country, the South East. Winter mornings still bring frost and condensation on frames and panels, so external mastic is timed for workable conditions and agreed with the site manager.
New units and refits on sites such as Parklands Business Park (to the north of Furzeley Corner) need their panel and perimeter joints sealed to the specification. For contractors at a school such as Denmead Junior School, sealing has to be finished before term starts. Hospital estates such as Queen Alexandra Hospital, 2.8 miles to the south of Furzeley Corner, tend to grow and change in phases, often next to occupied wards, so facade and perimeter sealing has to fit the estates team’s plan.
Furzeley Corner is about 1 mile west of Waterlooville, in Hampshire. Furzeley Corner sits inside our coverage, with the same fixed quotes and 12-month guarantee as everywhere else. Furzeley Corner is one of 723 places in Hampshire on our list for mastic packages. We also cover Portsmouth, some 6 miles away.
We cover the PO7 postcode districts for mastic packages. We cover commercial and managed buildings on Furzeley Corner, Sheepwash Lane and Furzeley Road. Just outside Furzeley Corner, we also work in Soake (1 mile north-east), Waterlooville (1 mile east), Purbrook Heath (2 miles south), Hart Plain (2 miles east) and Cowplain (2 miles east). Further afield, our area takes in Gosport (7 miles south-west), Havant (4 miles south-east), Eastleigh (13 miles north-west), Fareham (6 miles south-west), Horndean (3 miles north-east) and Chandler's Ford (15 miles north-west).
Around Furzeley Corner
Around Furzeley Corner, our work takes us to commercial buildings near The Mead End pub and Cowplain Community School, among other places. The nearest railway station is Cosham station, roughly 3.3 miles south. Well-known places in the area include Portchester Castle (4.2 miles south-west) and Queen Alexandra Hospital (2.7 miles south). Open spaces near Furzeley Corner include Portsdown Hill and St Clair's Meadow.