Construction and new-build mastic in Dalmore, Highland
Work needed on a mastic package in Dalmore? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- External joints sealed in damp or cold conditions that are now failing
- Frame gaps too wide for sealant alone
- Sealant knocked or painted over by other trades
Construction mastic near Dalmore
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
How we handle construction mastic in Dalmore
External mastic depends on the weather in a way most internal trades don’t. Cold or damp mornings, frost and condensation on frames can all hold external sealing up, so we plan elevations with the forecast and the programme in mind. Internal sealing often fills those days. Most enquiries involve frame perimeters left unsealed or poorly sealed and inconsistent sealant finishes from plot to plot, on floor and skirting junctions, window and door perimeters and sanitary and kitchen joints. Most enquiries from Dalmore start with one failed joint and grow into a wider look at the building: we check the joints around it and give you an honest view of what needs doing now and what can wait.
For a site around Dalmore, we plan the mastic in as few trips as the programme allows. Send drawings, photos and the programme so everything needed arrives on the first day.
Whoever the client is, the cover is the same: twelve months on the work we carried out. It doesn’t extend to damage, faults in the building or work by others, and we are upfront about that.
- Place
- Dalmore (IV17)
- Wider area
- Highland
- Cover
- 12 months on every job
- Quotes
- Quoted before any work starts
- Call
- 01277 525 020
- Page updated
- 3 November 2026
When to bring in a specialist
For a quick touch-up, site staff may be fine, but larger jobs are different: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
FAQs: Dalmore
Can you take on a job at a hospital such as County Community Hospital?
Yes. Healthcare sites are among the places we work. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Do you cover business parks and estates near Dalmore, such as Teaninich Industrial Estate?
Yes, sites like Teaninich Industrial Estate are within our area, along with the rest of Dalmore. A few photographs and the unit address let us price the work.
Do you work in Dalmore?
Yes. We take on work across Dalmore, with one number for every area we cover.
Does weather matter for sealant work?
For external joints, yes. Sealant needs a dry joint and a temperature within the product’s range, so frost, rain or cold mornings can delay outside work. Inside work is seldom held up.
Do you guarantee new-build sealant work?
The work is guaranteed for 12 months, covering how we sealed. Keeping other trades off finished joints prevents most problems.
Is it fine to apply new sealant on top of old?
No. Sealing over old material is one of the classic causes of early joint failure, so it all comes out first.
How much does the work cost?
That depends on the job: quantities, access, the product and any phasing. Call for a quote.
Mastic packages on Dalmore sites
With the shore within about 1 mile, Dalmore counts as a coastal location. On a coastal site, facade and perimeter joints face driven rain and, closer to the beach, salt, so we check the specified product suits the exposure before the first bead. A 2-mile radius around Dalmore takes in a number of hotels. Hotel refurbishments often run to tight programmes between busy periods, and perimeter and sanitary sealant has to keep up.
With historic properties like Novar House (to the west of Dalmore) in the area, refurbishment work often meets old masonry that needs compatible sealants. New units and refits on sites such as Teaninich Industrial Estate (1 mile west of Dalmore) need their panel and perimeter joints sealed to the specification.
Dalmore is about 15 miles north of Inverness, in Highland. Any commercial site in Dalmore is covered. Our Highland coverage takes in 256 places, from busy centres to rural villages.
We take on mastic packages across the IV17 postcode area, for business premises of every kind. Main routes into Dalmore include the A9, useful when we plan access and materials. We also cover Alness (1 mile north-west), Invergordon (3 miles east), Cullicudden (3 miles south), Saltburn (4 miles east) and Evanton (4 miles south-west) for mastic packages. Bigger towns within reach include Inverness (15 miles south), Cradlehall (15 miles south), Tain (11 miles north-east), Merkinch (14 miles south), Dingwall (9 miles south-west) and Dornoch (15 miles north-east). Remote and island addresses take more planning, from travel and ferries to the weather, so mention the location when you call 01277 525 020 or email us.
Near you in Dalmore
Dalmore has its own railway station: Alness station. Other landmarks nearby include Contullich Castle (2 miles north-west) and County Community Hospital (3.3 miles east). Not far away are Cnoc Fyrish and Loch Achnacloich.
Keeping the joints sound
Cleaning and maintenance staff play a part too. Share these points with them:
- Ask for joint and product checks before the package is urgent
- Allow flexibility for external sealing in damp or cold weather
- Flag uneven or tapered frame gaps early
- Keep product details for future maintenance
At handover, keep the product details with the O&M information. That helps the building owner maintain the joints later and avoids guesswork when joints are renewed. We can confirm the handover information you need when we quote.
Oversized gaps are a problem better caught early. Filling a wide gap with sealant alone sets up a failure so packing or adjustment by the installer comes first. We flag them as soon as we see them.
How the quote is worked out
Each job is priced on its own details. The things that drive the figure:
- The total length or number of joints
- Any access equipment needed
- The size and state of each joint
- Distance, for remote addresses
What a job costs comes down to the quantity of joints, what has to come out first and how the joints are reached. Call for a quote once you have the details.
What we need to price the job
Whether it’s one area or a whole building, these details speed things up:
- Specification clauses that apply
- Drawings or a marked-up plan, if available
- How the joints are reached, and at what height
- When you need the work done
If there’s a specification, drawings or a tender package, send it with your enquiry, and we will price the work to it. Smaller jobs need nothing more than photos and a few notes.
Places near Dalmore
What else we do in Dalmore
Leave it or put it right?
Refurbishments sometimes budget for new windows when the frames are sound and only the seal has failed. If the frame is in good order, cutting out and resealing the perimeter can be all it needs and that’s a far smaller job. If the frame is life-expired, we will tell you. In Scotland, wind-driven rain finds a failed joint quickly, and for a smaller place like Dalmore, a repair visit takes planning, so it’s better to act early.
We don’t publish prices, since every building and every scope is different. Call for a quote and we’ll price your job on its own details.
Why choose Mastic Doctor in Dalmore
- Coloured sealants to suit the setting, where available
- CHAS accredited
- Colour options checked against the specified product
- A fixed quote before work starts
Take a look at what affects the cost or our accreditations.
Signs you need construction mastic in Dalmore
Swapping the specified sealant for a cheaper general-purpose product is a common cause of failure. A sealant that isn’t right for the substrate or the movement will fail ahead of time. We stick to the specified product, or put any alternative to you first.
It’s worth sending us details if you spot any of the following:
- Frame gaps too wide for sealant alone
- New external sealant already peeling away
- Window and door perimeters that won’t pass inspection
- Bath and shower joints scraped during the final clean
For contractors at a school such as Alness Academy, sealing has to be finished before term starts.
Comparing quotes
- What level of public liability insurance do they hold?
- Their pre-qualification and accreditations
- Their plan for phasing and protecting the area
- Their approach to joint depth and backing
How a job runs
Inspect, seal, sign off: that’s the shape of every visit. We inspect the joints and confirm what’s in scope, then the work is carried out to the specified product and detail, and the job ends with a walk round and sign-off. Travel to smaller Scottish places like Dalmore is planned so the job is finished in one visit where possible, so photographs, sizes and a full list matter. Outside work also needs a suitable weather window.
- We start with the drawings, specification and programme.
- We take off quantities and return a fixed quote.
- The sequence is agreed with the site manager.
- Each area is sealed when it’s released.
- Joints are prepared, backed and sealed to the specification.
- After snagging, the work is handed over under our 12-month guarantee.
Before we start on site
- Warn occupants and staff about the work
- Tell us your opening times and when work is allowed
- Confirm the product named in the specification
Request a quote
Send us photographs, drawings or a joint schedule and a fixed quote comes back to you. Where a site visit makes more sense, we will arrange one.