Construction and new-build mastic in Crathes, Aberdeenshire
We carry out mastic packages for new-build and refurbishment projects in Crathes. Send photos or drawings for a fixed quote.
- Internal caulk splitting as the building dries out
- Frame gaps too wide for sealant alone
- Sealant knocked or painted over by other trades
Need construction mastic in Crathes?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Sites and facades in and around Crathes
Being in the east of Scotland, Crathes gets less rain than the west coast. Cold, damp starts still stop external sealing on some days. External dates keep a little give. Scotland has its own building regulations, and in Crathes warrants come from the local authority verifier. We seal to the specification that sits behind the warrant.
Units on estates such as Banchory Trade Park, 2.3 miles west of Crathes, tend to be reclad and refitted as tenants change, and each job leaves cladding and perimeter joints to seal. On a healthcare site such as Glen O'Dee Hospital, 4 miles west of Crathes, new blocks and refurbishments go on while the hospital keeps running, so mastic work is sequenced carefully.
Crathes is about 13 miles south-west of Aberdeen, in Aberdeenshire. We send applicators to Crathes for mastic packages. Crathes is one of 179 places we cover in Aberdeenshire. Sites around Aberdeen have their own page, roughly 13 miles from Crathes.
Anyone looking for construction mastic in AB31 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. We cover commercial and managed buildings on Hollybush Lane and Green Banks. Sites close to Crathes are covered too, including Crossroads (1 mile south), Kirkton of Durris (1 mile east), Balfour (2 miles east), Woodlands (2 miles east) and Banchory (3 miles west). A short drive away, we cover Westhill (8 miles north-east), Stonehaven (9 miles south-east), Portlethen (10 miles east), Kemnay (12 miles north), Kintore (12 miles north) and Aboyne (14 miles west).
What’s near Crathes
A little further out are Crathes Castle (1 mile west) and Crathes Castle (1 mile west). For a walk, there’s Scolty Hill.
Construction mastic in Crathes, done properly
Mastic is often where a new building first shows its quality to the client. Untidy or missed joints are among the commonest snag items, and every return visit costs time. Our aim is joints that pass at the first inspection. We work on internal decorators’ caulk, sanitary and kitchen joints and window and door perimeters, and what we are called in for most is frame perimeters left unsealed or poorly sealed and a long mastic snag list close to completion. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, in Crathes it comes down to the same thing: failed joints cut out, faces prepared and the right sealant laid to the right depth.
In smaller places such as Crathes, building work tends to be single schemes rather than big developments. Exposed elevations in Scotland put facade and perimeter joints to work from day one, so the sealant choice matters.
Guaranteed is the last step of every job. You get a 12-month guarantee on our workmanship, and the quote explains what it covers.
- Where
- Crathes (AB31)
- Region
- Aberdeenshire
- Guarantee
- A 12-month guarantee
- Price
- Quoted before any work starts
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Towns and villages near Crathes
Other services in Crathes
How the job changes by surface
Window and door perimeters
Frames sealed into the opening keep rain out of the reveal. They’re sealed with a low-modulus neutral-cure silicone or another product named in the specification, with backing rod in deeper gaps.
External facade and movement joints
Movement joints in the facade are sealed with a product suited to the expected movement. We set the depth with backing rod to avoid three-sided adhesion.
How a job runs
Before any cutting starts, the area is protected: tape along each joint edge and covers over finishes, stock and equipment close by. The work itself typically takes a day or two on a small fit-out and several weeks on a large multi-storey package, and our waste is bagged and taken away as we go. For a building near Crathes, directions, keys and a contact on the day are worth sorting early. We will confirm the plan with the fixed quote.
- First we take quantities off the drawings and read through the specification.
- You receive a fixed quote listing scope, products and phasing.
- You tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we confirm it with the quote.
- Work follows the programme, area by area, as rooms and elevations become ready.
- Joints are cleaned, primed where the maker requires it, backed and sealed to the specification.
- Snags are cleared before handover and completed areas carry our 12-month guarantee.
Before we start on site
- Clear stock, furniture or equipment away from the joints
- Let us know about inductions and permits
- Point out any areas we must not close
Quotes
The quickest route to a quote is a few photographs and the site postcode. Send them through the quote form, or speak to us on 01277 525 020 or send photos by email if you’d rather talk the job through.
Advice
Common questions from Crathes clients
Is Banchory Trade Park, near Crathes, within your area?
Yes, sites like Banchory Trade Park are within our area, along with the rest of Crathes. To start, just ring 01277 525 020 or use the quote form with the unit, the joints involved and your access times.
Is hospital work, at somewhere like Glen O'Dee Hospital, something you do?
Yes. We work in healthcare settings as well as offices and schools. Each area is agreed with the ward or department and the estates team in advance.
Do your applicators hold CSCS cards?
We’re CHAS accredited and a Constructionline member, and our applicators hold CSCS cards. We confirm any paperwork you need with the quote.
Is Crathes in your area?
Yes. Crathes is in our area. To discuss a job, call 01277 525 020 or email us.
How do I request a quote?
There are four steps: send details, get a quote, we seal, guaranteed. Step one needs little more than photos and a postcode.
Can weather delay the job?
For external joints, yes. The joint has to be dry and within the product’s temperature range, so frost, rain or cold mornings can delay outside work. Internal work is rarely affected.
What hours do you work?
Give us your site hours and any access windows in your enquiry, and we’ll plan around them. You can reach the office between 8am and 5pm, Monday to Friday.
When something else is needed
Being straight saves everyone time. New sealant won’t cure:
- Glazing units that are cracked or misted
- Joints damaged after sign-off by following trades
- Deciding which fire-stopping product a penetration needs
If you’re not sure, just phone 01277 525 020 or send photos by email and we will give you a straight answer before you book.
Where we work in Crathes
- Floor and skirting junctions
- Brick and block movement joints
- Internal decorators’ caulk
- Window and door perimeters
- Sanitary and kitchen joints
- Cladding and panel joints
Quoting for work in Crathes
To price the job, we consider:
- The total length or number of joints
- Travel to remote or island sites
- How accessible the joints are
- The product specified
Access often affects the price as much as the sealing: joints within easy reach take less time than ones that need access equipment. Tell us how the joints are reached and call for a quote.
What we need to price the job
Good information means a firmer quote. Helpful details to send:
- Rough lengths or quantities, or drawings if you have them
- Your programme or deadline
- Anything awkward about access or site hours
- Photos of the joints, close up and from further back
Send details, get a quote, we seal, guaranteed: that’s how every job runs. The first step is to give us a call on 01277 525 020 or email a schedule or drawings with what you know.
When to bring in a specialist
General builders and handymen seal joints, but it isn’t their main trade. A specialist prepares properly, controls joint depth and picks a product with the right movement class.
A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
Why it’s worth doing now in Crathes
Some packages split mastic across the window fitter, kitchen fitter and plumber. In practice it often means different standards, gaps in responsibility and snags nobody owns. One mastic subcontractor for the lot keeps it simple, with the same standard on every plot. Buildings that aren’t in daily use, such as halls and seasonal premises, may let water in unnoticed, so a failed joint has time to cause damage. Early resealing prevents it.
Small jobs and large programmes are priced from the same things: scope, access, product and programme. Call for a quote, and you will have a fixed figure to work with.
Why appoint us
- Sealing commercial buildings since 2005
- CHAS accredited contractor
- Public liability insurance in place
- Colour options checked against the specified product
Take a look at what affects the cost or how we’re accredited.