The Mastic Doctor team standing beside their branded vans outside an office building
Buckinghamshire · England

Commercial sealant contractors in Fingest, Buckinghamshire

Our CSCS-carded applicators take on sealant work for offices, shops, hotels and other commercial buildings in Fingest. Send photographs or drawings for a fixed quote.

  • Expansion joints with the sealant torn out
  • Sanitary sealant that has gone black and patchy
  • Messy, uneven beads from earlier work that let the building down
1
Send details
Tell us about the site, with photos if you have them.
2
Get a quote
A fixed price, with what’s included set out clearly.
3
We seal
CSCS-carded applicators, the right product for each joint.
4
Guaranteed
12-month guarantee on our workmanship.
Covering the South East & Scotland
CHAS accredited
£5m public liability

Need commercial sealant contractors in Fingest?

Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.

Sealant specialists in Fingest

A reseal stands or falls on the preparation underneath it. Old silicone gives new sealant nothing to grip, so every trace of it is removed, then both faces are cleaned back to sound, dry material with no dust or grease on them. Primer is used wherever the manufacturer calls for it on that surface, and a backing rod limits the depth to give the sealant room to work. The enquiries we see most involve smeared sealant across finishes from a rushed job and a top-up bead over failed sealant, now lifting, across washrooms and tea points, external facade joints and window and door perimeters. Searching for sealant specialists in Fingest? Mastic Doctor has worked for contractors, FMs and building owners since 2005, with CSCS-carded applicators.

If you look after more than one building near Fingest, the work can be planned as one programme, with one quote format and one point of contact.

Work in smaller places such as Fingest tends to come one building at a time: a pub kitchen, a hall, a small office. We plan the visit so everything on the list is done in one go, with the right products and colours on hand.

Every job ends the same way: guaranteed. Our workmanship is backed for 12 months, and the quote explains what it covers.

Where
Fingest (RG9)
Wider area
Buckinghamshire
Cover
12 months on our workmanship
Quotes
Fixed quote, scope in writing
Telephone
01277 525 020
Updated
3 November 2026
The Mastic Doctor team standing beside their branded vans outside an office building

Why act early in Fingest

Some managers wait for a fit-out before touching the mastic. That’s reasonable for internal joints that are just tired-looking, but external and wet-area joints that already leak shouldn’t wait. Splitting the scope into now and later is often the sensible compromise. Older rural buildings around Fingest move with the seasons, and rigid or tired sealant can’t keep up. A sealant with the right movement capability, correctly sized, lasts far better.

The price depends on the quantity of joints, how much old material needs removing and the access. Call for a fixed quote once you have the details.

Why clients in Fingest choose us

  • A range of standard colours, depending on the product
  • Colours confirmed for the specified product
  • One phone line for London, the South East and Scotland
  • Health and safety: CHAS accredited

See how commercial sealant jobs are priced and how we’re accredited.

Common problems we fix in Fingest

Plenty of failed joints were never sealed with the right product. Painters’ acrylic in a moving joint, vinegar-smelling silicone on metal or natural stone, or a high-modulus product where a low-modulus one was needed will all fail early. BS 6213 gives guidance on choosing construction sealants.

Common reasons buildings call us in:

  • Black mould through washroom sealant that won’t clean off
  • Gaps behind commercial kitchen worktops and sinks
  • Frame sealant that has cracked, shrunk or pulled away
  • Wall and floor joints that have lost their seal

A lasting commercial joint around Fingest begins with the old bead fully out and the faces clean and dry.

What your quote should include

  • How long is the guarantee, and what does it include?
  • How joint depth will be controlled
  • Which product they’ll use, and why it suits the joint
  • Who will actually carry out the work

Choosing a commercial sealant contractor

What sets the cost

The price varies from site to site. It mainly depends on:

  • Removal of failed or old sealant
  • The product specified
  • Travel to remote or island sites
  • Site requirements such as inductions and permits

Access often affects the price as much as the sealing: easy-to-reach joints are quicker than those that need equipment to get to. Tell us how the joints are reached and call for a quote.

What to include in your enquiry

Good information means a firmer quote. When you get in touch, include:

  • Where the site is, with the postcode
  • The asbestos register, for older buildings
  • What the building is and how it’s used
  • Clear photos of the problem areas

Specifications, drawings and tender packages are welcome with any enquiry, and we will price against exactly what is specified. For smaller jobs, photos and a description will do.

What the job involves on each surface

Movement joints in walls and floors

Floor joints that take trolleys or forklifts need a tougher filler or sealant. The choice comes down to how much the joint moves and what runs over it, and tell you if the edges need repairing first.

Window and door perimeters

Inside, cracked sealant around frames and window boards is common. We use a paintable product where decorating follows and a silicone where it doesn’t, matched to the frame colour where colour matters.

Your questions answered

Can the sealant on our Fingest premises match the finishes?

Yes. Colour matching to frames, cladding, stone and shop-fit finishes is a regular part of the work. Send colour references or photos and we’ll confirm what’s available for the product.

Is Fingest too far out for you?

Not at all. Fingest is within our area. We cover Greater London and the counties of the South East. Good photographs up front let us bring everything on the first visit.

Are you CHAS accredited and on Constructionline?

Yes. We are CHAS accredited and a Constructionline member.

Which site documents can you send us?

The paperwork is agreed with the quote: RAMS, an insurance certificate and CSCS details are the usual requests. Every applicator holds a CSCS card.

Which sealant will you use?

A specification, where there is one, decides it. Without one, the joint decides: its movement, its surfaces and what it has to cope with.

Can areas stay open during the work?

We phase the work so parts of the building stay open. We plan around the site hours and access windows you give us.

How many days will you need on site?

That varies with the scale of the job, though a typical visit normally takes part of a day on a small job and longer where several buildings or phases are involved. Larger or phased jobs take longer, and we’ll give you a timescale with the quote.

Aftercare for building managers

For the best life from the joints:

  • Check the asbestos register before anyone disturbs old sealant in an older building
  • Check sealant as part of routine building inspections
  • Act on the first lifting edges rather than waiting
  • Log reseals in the O&M or maintenance records

Good ventilation keeps wet-area sealant in better condition. Fans that are broken or switched off leave joints damp for longer, and mould follows damp. It’s worth having fans checked while the sealant is fresh.

A failed external joint lets water in every time it rains. Behind a panel or frame, that water can sit unseen for a long time. Catching it at the sealant stage avoids the bigger repair.

How a job runs

Inspect, seal, sign off: every visit follows that pattern. First comes an inspection and agreement on scope, then the work is carried out to the specified product and detail, and we finish with a walk round so the work can be signed off. For work around Fingest, we aim to finish in one visit, so photos and measurements up front really help. That way the right products come on the day.

  1. Site photos, drawings or a visit tell us what’s there and how it has failed.
  2. You get a fixed quote covering removal, preparation and the new sealant.
  3. We agree the order of work, access windows and site hours with you.
  4. The failed sealant comes out and the faces are prepared, with primer where required.
  5. Backing goes in, the new sealant is laid and tooled, and the area is left neat.
  6. We hand back each area with its cure time and our 12-month guarantee.

Preparing the site

  • Tell us what induction or permit system the site runs
  • Warn occupants and staff about the work
  • Move anything stored against the joints

Ask for a quote

Need a figure for a tender or a budget? We will quote against your scope and drawings you can plan around. For a chat about it beforehand, ring 01277 525 020 or email drawings and photos.

Get a quick quote

Read more

Shops, offices and hotels in and around Fingest

Fingest sits in one of the drier corners of the country, the South East. Drier doesn’t mean dry every day, so frontage work still has some give in the dates. At about 35 miles from central London, Fingest is within reach of the capital. The commuter belt holds a great many offices, retail parks and business parks. Firms with branches across the South East can use one contractor for every site.

For premises near Saunderton station, 4.8 miles to the north-east of Fingest, footfall is part of the plan: work is phased so shops and offices keep trading.

Fingest is about 5 miles north-west of Marlow, in Buckinghamshire. We cover commercial sites throughout Fingest, whether it’s a single job or part of a planned programme. Our Buckinghamshire coverage takes in 308 places, large and small. Our Reading page has more on work in that area.

Postcode districts covered here: RG9 for sealant joints. Nearby places we also cover include Turville (1 mile west), Little Frieth (1 mile south-east), Cadmore End (1 mile north-east), Frieth (1 mile south-east) and Bolter End (2 miles north-east) for sealant joints. Nearby towns on our patch include Aylesbury (14 miles north), High Wycombe (6 miles east), Chesham (13 miles north-east), Marlow (5 miles south-east), Amersham (13 miles east) and Beaconsfield (10 miles east).

Near you in Fingest

Recent enquiries here include premises near The Chequers Inn and the streets around them. The nearest railway station is Saunderton station, roughly 4.8 miles north-east of the centre. Nearby you will also find Wycombe Hospital (5.4 miles east). For a walk, there’s Bald Hill and Warburg Nature Reserve.

Map of Fingest © OpenStreetMap contributors
Accreditations

Trusted. Accredited. Insured.