Sealant applicators in Ardersier
Our CSCS-carded applicators take on sealant work for offices, shops, hotels and other commercial buildings in Ardersier and the surrounding area. Send details for a fixed quote.
- Mouldy silicone around WCs, urinals and vanity tops
- Messy, uneven beads from earlier work that let the building down
- Expansion joints with the sealant torn out
Commercial sealant contractors across Ardersier
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Common problems we fix in Ardersier
A split down the middle of the bead tells a different story. That normally means the joint stretched further than the product could cope with: a bead laid too thin, an over-stretched joint or the wrong movement class. Replacing it like for like rarely holds.
If one of these sounds familiar, it’s time for a closer look:
- Damp patches where an external joint has failed
- Messy, uneven beads from earlier work that let the building down
- External beads that have gone brittle and cracked
- Black mould through washroom sealant that won’t clean off
Offices and shops close to stations such as Inverness Airport station, 2.3 miles to the south of Ardersier, tend to be busy all day, so sealant work is planned around opening hours.
What to look for in a quote
- What the guarantee covers, and for how long
- Their plan for phasing and protecting the area
- The named product and why it was chosen
- Whether their applicators hold CSCS cards
Commercial mastic work in Ardersier
Mastic Doctor has been sealing joints for businesses and contractors since 2005, and the paperwork side is in order: CHAS accredited, Constructionline member, five million pounds of public liability insurance and CSCS-carded applicators. Let us know which site documents you need and they’ll be confirmed with the quote. Most enquiries involve frame mastic that has hardened and come away from the wall and gaps behind commercial kitchen worktops and sinks, across washrooms and tea points, floor and threshold joints and external facade joints. A specialist sealant contractor works differently from a general builder: on jobs in Ardersier, preparation and product choice get the time they need.
On a typical commercial building in Ardersier, the joints that fail first are the hardest-worked ones: frame perimeters in the sun, floor joints at doorways and anything that gets wet every day.
Travel to smaller places such as Ardersier is planned so the whole job is finished in one visit where possible, so it helps to have photographs and a full list first. If neighbouring businesses have work too, the visits can be grouped.
Our workmanship is guaranteed for 12 months. If our installation lets you down in that time, we return and fix it.
- Location
- Ardersier (IV2)
- Region
- Highland
- Guarantee
- 12 months on our workmanship
- Quote
- Quoted before any work starts
- Call
- 01277 525 020
- Page updated
- 3 November 2026
What sets the cost
A fixed quote reflects the actual work. It takes account of:
- Removal of failed or old sealant
- How much there is to seal
- Phasing around occupants
- How accessible the joints are
Access can matter as much as the joints themselves: easy-to-reach joints are quicker than those that need equipment to get to. Mention the access as part of your enquiry.
Details that help us quote
However big the job, the same details help:
- Approximate linear metres or a joint schedule
- The product your specification calls for
- The postcode of the building
- Whether an asbestos survey exists
Quotes are fixed against the scope you send, so you know the figure before anyone is on site. To start the process, speak to us on 01277 525 020 or send details through our quote form.
What else we do in Ardersier
What Ardersier’s businesses ask us to seal
Ardersier sits close to the coast, within about 1 mile. For shops, hotels and offices, that means frontage and frame joints that weather faster than they would inland. Sea-facing elevations are usually where failed joints show first. Ardersier is on Scotland’s wetter western side. Frontage work is booked with a few days’ give for the weather. Shopfronts and frames facing the prevailing weather are where failures show first
Trade counters and showrooms on estates such as Dalcross Industrial Estate (to the south-west of Ardersier) need neat joints where customers see them.
Ardersier is about 6 miles west of Nairn, in Highland. We send applicators to Ardersier for sealant joints. Across Highland, 256 places are covered, Ardersier among them. For work in that direction, see our Aberdeen page.
Business premises anywhere in IV2 are within our area. If your site is on Station Road, High Street and Cameron Drive or close by, we can quote for sealant joints. Just outside Ardersier, we also work in Croy (3 miles south), Rosemarkie (3 miles north-west), Fortrose (4 miles west), Avoch (5 miles west) and Cawdor (5 miles east). Further afield, our area takes in Inverness (10 miles south-west), Nairn (6 miles east), Cradlehall (7 miles south-west), Merkinch (10 miles south-west), Dingwall (15 miles west) and Hilton (10 miles south-west). Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so give the site location in your enquiry.
Landmarks near Ardersier
For rail, the closest station is Inverness Airport station, roughly 2.3 miles south. Well-known places in the area include Highland Aviation Museum (2.1 miles south-west) and Chanonry of Ross (3.7 miles west). Green spaces nearby include Loch of the Clans and Fairy Glen.
Site staff or a sealant specialist?
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and we will confirm the paperwork you need with the quote.
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.
Your questions answered
Is a smaller place like Ardersier outside your area?
No. Places such as Ardersier are covered as much as the big towns. Our area covers all of Scotland, cities, towns and islands alike. Where we can, we group nearby jobs to make the most of each trip.
Our building in Ardersier is near the coast: does that change the sealant?
It can, yes: buildings near the sea take more wind-driven rain, and salt in the air nearer the shore. Product choice and preparation matter more, and sea-facing elevations are worth inspecting more often.
What guarantee do you give on resealing?
Our workmanship on each job is backed by a 12-month guarantee. Public liability insurance is in place too.
How many days will you need on site?
It depends on the scope, though a typical visit usually takes anything from part of a day on a short run of joints to several weeks on a large phased package. For bigger or phased jobs, we will set out a timescale with the quote.
Do you take on multi-site sealant work?
Yes, across South East England, Greater London and all of Scotland. Each site gets the same process and a single contact.
How long do sealant joints last?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Sealant joints are maintenance items, so inspect them regularly.
When can the area be used after sealing?
We’ll confirm how long the chosen product needs to cure.
Why act early in Ardersier
On many buildings the mastic was done by whichever trade was on site. A specialist applicator takes care of product choice, joint depth and preparation, the three things that decide how long a joint lasts. It shows over the following seasons rather than at handover. For buildings near Ardersier, dealing with all the failing joints at once saves return trips. Send photographs and we’ll quote for everything together.
Quantities, awkward access and phased working all shape the price. Site requirements like inductions and permits play a part as well, along with the time of year for external work.
Why choose Mastic Doctor in Ardersier
- Workmanship guaranteed for 12 months
- RAL and finish matching where the product range allows
- CHAS accredited contractor
- One contact handling all your sites
See what affects the cost and our accreditations.
On site: what to expect
We begin with a short walk round with whoever looks after the building, agreeing which joints are in scope, where to start and what must stay open. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. Where we can, we combine work around Ardersier with other jobs nearby, to make the most of each trip. Let us know if your dates have any give.
- We begin with whatever information you have, whether that’s photographs, a drawing or a list of locations, or we arrange a site visit.
- The failure is diagnosed and a fixed quote issued for the work agreed.
- We plan around your site hours and access windows, phasing the work where areas have to stay in use.
- The failed bead is removed and the joint faces cleaned until they’re sound and dry.
- Backing and primer go in where needed, then the chosen sealant is applied and tooled.
- We walk the completed areas with you and sign them off under the 12-month guarantee.
What we need from you
- Point out parking and an unloading spot
- Make sure the joints can be reached
- Agree which areas must stay open
Getting a fixed quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. To take the first step, ring 01277 525 020 or send details through our quote form.
Related advice
How the job changes by surface
Fire-rated seals where specified
Where the specification calls for fire-rated or intumescent sealant around service penetrations or linear gaps, we install it to the product’s tested detail. The design and sign-off of fire stopping belong to the designer and building control.
Window and door perimeters
Where frames meet the surrounding wall, sealant is the weather line. Failed perimeters are cut out and cleaned, backing goes into deeper gaps, and the joint is resealed with a low-modulus neutral-cure silicone or another suitable product.