Coloured Sealant in Ardersier
Coloured and colour-matched sealant for visible joints throughout Ardersier and nearby, carried out by CSCS-carded applicators. Fully insured and CHAS accredited.
- Joints that need to match a new RAL frame colour
- White or grey sealant that clashes with the finish
- Fit-outs with a sealant colour in the specification
Coloured sealant in Ardersier
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Coloured sealant in Ardersier, done properly
Where colour is critical, a sample bead in a discreet spot settles the question. Sealant can look slightly different once it has cured, and again in different light, so approving a sample on site is worth doing. Let us know who signs off colour, and we will fit the sample into the programme. If you are dealing with old sealant that has yellowed, darkened or faded and fit-outs with a sealant colour in the specification, we can help, whatever the surface. Whoever orders the work in Ardersier, the brief is usually the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
For work in and around Ardersier, we’d rather do everything on one trip, so it helps to have photos and a full list first. If neighbouring businesses have work too, the visits can be grouped.
Work we carry out comes with a 12-month guarantee. Should something we installed fail, call 01277 525 020 or email a schedule or drawings and we will come back to it.
- Where
- Ardersier (IV2)
- Wider area
- Highland
- Guarantee
- A 12-month guarantee
- Price
- Quoted before any work starts
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Questions we are asked in Ardersier
Will you take on work at estates like Dalcross Industrial Estate, close to Ardersier?
Yes. Estates, retail parks and business parks around Ardersier, Dalcross Industrial Estate among them, are all within reach. Send details of the unit and the work through our quote form for a quick quote.
Does the sea air around Ardersier change the choice of sealant?
It can. Wind-driven rain and, closer to the shore, salt air are harder on external joints. Product choice and preparation matter more, and sea-facing elevations are worth inspecting more often.
Can the building stay open while you work?
Typically, yes. We phase the work so most of the building stays in use.
Can you fit around our working hours?
We are in the office from 8am until 5pm, Monday to Friday. Let us know your site hours and access windows, and the work will be planned around them.
Do you match sealant to RAL colours?
Yes. We compare the RAL reference with the colours made for the specified sealant. We’ll tell you which colour is closest before work starts.
Can you quote from photographs?
Many jobs can be quoted from photos, drawings or a joint schedule. If the job needs a look first, we’ll arrange a visit before quoting.
Will the sealant be an exact match to our finish?
No, not in every case. We match as closely as the product’s range allows.
What happens if it’s left?
Across a chain of shops or hotels, consistency matters. Setting one product and colour for every site avoids variation. Renewing every failing joint on one visit is the sensible approach for a place like Ardersier. Photos of each area help us quote the whole job.
The price depends on the quantity of joints, what has to come out first and the access. Call for a fixed quote once you have the details.
Why clients in Ardersier choose us
- Fixed quotes based on photos, drawings or a visit
- 12-month guarantee on workmanship
- Health and safety: CHAS accredited
- One contact handling all your sites
See how commercial sealant jobs are priced and how we’re accredited.
What else we do in Ardersier
When something else is needed
Honesty saves time and money. New sealant won’t cure:
- A colour that never alters with age
- Finishes that change colour from one area to another
- Paintable products in joints they aren’t suited to
If you are not sure, just speak to us on 01277 525 020 or send photos by email and we will give you a straight answer.
What we seal
- Office fit-out finishes
- Hotel bathrooms and public areas
- Shop-fit joinery and counters
- Powder-coated and anodised frames
- Cladding panels
- Natural stone and brick
What the job involves on each surface
Cladding panels
Cladding joints are often seen across a whole elevation. We pick a facade-grade sealant in a shade that sits with the panels, rated for the joint’s movement.
Brick and masonry
Vertical movement joints run the full height of many brick walls. The right colour keeps them discreet.
General trades versus a specialist
Some joints are best left to specialists: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class, which is what makes a joint last.
Coloured sealant in Ardersier: the local picture
Ardersier is within about 1 mile of the coast. For shops, hotels and offices, that means frontage and frame joints that weather faster than they would inland. Sea-facing elevations are usually where failed joints show first. Ardersier is on Scotland’s wetter western side. We plan external joints for dry spells and keep internal work in reserve. Shopfronts and frames facing the prevailing weather are where failures show first
Trade counters and showrooms on estates such as Dalcross Industrial Estate (2.1 miles south-west of Ardersier) need neat joints where clients see them. Offices and shops close to stations such as Inverness Airport station (2.3 miles south of Ardersier) tend to be busy all day, so sealant work is planned around opening hours.
Ardersier is about 6 miles west of Nairn, in Highland. We send applicators to Ardersier for colour-matched joints, handled exactly as we handle every other area. Ardersier is one of 256 places we cover in Highland for colour-matched joints. There’s a separate page for Aberdeen, about 77 miles away.
We cover the IV2 postcode districts. Streets here include Station Road, High Street and Cameron Drive. Close to Ardersier, our area also takes in Croy (3 miles south), Rosemarkie (3 miles north-west), Fortrose (4 miles west), Avoch (5 miles west) and Cawdor (5 miles east). A short drive away, we cover Inverness (10 miles south-west), Nairn (6 miles east), Cradlehall (7 miles south-west), Merkinch (10 miles south-west), Dingwall (15 miles west) and Hilton (10 miles south-west). Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so mention the location when you ring 01277 525 020 or email us.
Near you in Ardersier
For rail, the closest station is Inverness Airport station, roughly 2.3 miles south of the centre. Nearby you will also find Highland Aviation Museum (2.1 miles south-west) and Chanonry of Ross (3.7 miles west). Not far away are Loch of the Clans and Fairy Glen.
Our process
Inspect, seal, sign off: every visit follows that pattern. First comes an inspection and agreement on scope, then the work is carried out to the specified product and detail, and the job ends with a walk round and sign-off. Tell us who will meet us and how to get in at your building near Ardersier. That goes into the plan alongside the quote.
- The sealant type is chosen for the joint first, then the colour.
- We compare your RAL reference or sample with the colours made for that sealant.
- Where colour is critical, a sample bead can be agreed in a discreet spot.
- We remove the existing bead, clean the faces and set the depth.
- We apply the agreed colour and tool it neatly, with masking where the finish needs it.
Preparing the site
- Flag any permit to work we will need
- Point out parking and an unloading spot
- For older buildings, check the asbestos register before work
Ask for a quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to ring 01277 525 020 or email a schedule or drawings with what you know.
Read more
Building owners, agents and FMs in Ardersier
Facilities managers want contractors who arrive with the paperwork sorted. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we’ll confirm them with the quote.
If you look after buildings for someone else, you need clear quotes and clear reporting. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative, plus a 12-month guarantee.