Coloured Sealant in The Mint
Sealant work in The Mint for main contractors, managing agents and facilities managers: coloured and colour-matched sealant for visible joints, quoted at a fixed price.
- Previous reseals that don’t match the original
- Coloured joints that have cracked with movement
- Dirty, discoloured joints in public areas
Coloured sealant for The Mint sites
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
After the work
After handover, these steps help:
- Agree the sealant colour early and write it into the specification
- Look at the cured colour before the full run
- Keep the colour details for future repairs
- Reseal whole runs rather than patching single joints
Don’t let anyone patch a coloured joint with whatever sealant is to hand. Wrong-colour patches are obvious, so it is better to reseal the section properly.
Put the sealant colour into the specification or finishes schedule. Late decisions lead to substitutes and mismatches.
About our coloured sealant in The Mint
Where finishes matter, a white or grey bead in the wrong place stands out. We install coloured and colour-matched sealant so joints sit quietly against cladding, stone, brick, frames and shop-fit finishes. The right product for the joint always comes first, then the colour. We work on hotel bathrooms and public areas, natural stone and brick and cladding panels, and the usual reasons a site gets in touch are sealant that no longer suits recoated frames and shop fits that need consistent sealant colours across sites. For commercial sealant work in The Mint, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.
Work in smaller places such as The Mint tends to come one building at a time: a pub kitchen, a hall, a small office. We plan the visit so everything on the list is done in one go, with the right products and colours on hand.
The 12-month guarantee is for workmanship rather than wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we spell out the cover before we begin.
- Where
- The Mint (GU33)
- Wider area
- Hampshire
- Guarantee
- 12 months on our workmanship
- Quote
- A fixed quote before we start
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Leave it or put it right?
It’s far cheaper to approve a sample than to strip and redo a full run. A sample takes little time. Halls, stores and units around places like The Mint may not be checked every day, so a failed joint can leak for a while before anyone sees it. Renewing joints in good time avoids the problem.
The product called for affects the cost, as does the preparation each joint needs, such as cutting out, priming or new backing rod. Access, phasing and site requirements come into it too.
Why choose Mastic Doctor in The Mint
- CHAS accredited contractor
- Public liability insurance in place
- Commercial sealant work since 2005
- Colours confirmed for the specified product
Read our cost guide or our accreditations.
Quoting for work in The Mint
The price varies from site to site. It mainly depends on:
- Phasing around occupants
- Any access equipment needed
- Specialist products, such as fire-rated or hygienic sealants
- How much existing material needs removing
Pricing colour-matched joints depends on how many there are, their condition and the access. Ask us for a fixed quote.
Details that help us quote
Diagnosis starts before we arrive. Let us know:
- The postcode of the building
- The type of building and who uses it
- Any specification or named product
- Asbestos survey details if the building is older
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we’ll arrange a site visit if anything is unclear.
On site: what to expect
When we get to site, we report to your site contact and complete whatever induction the building runs. Floors, finishes and fittings next to the joints are covered before any cutting starts, and the work normally takes a few hours or a phased programme, depending on joint lengths and how many colours are involved. For work around The Mint, we aim to finish in one visit, so photos and measurements up front really help. That way the right products come on the day.
- We confirm the joint type and the product it needs.
- Your RAL reference, sample or photo is checked against that product’s colours.
- You approve the colour, on site if it’s critical.
- The existing bead comes out, then faces are cleaned and backed.
- We mask, seal and tool to a clean line.
- We remove the masking and walk the finished joints with you.
Preparing the site
- Send asbestos survey details if the building is pre-2000
- Tell us your opening times and when work is allowed
- Tell staff and tenants when we’ll be in
Get a fixed quote
To get a fixed quote, ring 01277 525 020 or email a schedule or drawings with the site address and an outline of the work. You can also send details through our quote form.
Read more
Owners, agents and contractors
Whether you’re a managing agent, a property factor or an owner’s representative: send details, get a fixed quote, we seal, guaranteed. We can agree access arrangements and keyholder contacts beforehand.
We work for building owners and managing agents on everything from one building to a spread of sites around The Mint. One quote can cover more than one site, which keeps the paperwork simple.
Common questions from The Mint clients
Is The Mint too small for you to travel to?
No. Small places get the same service as large ones. We cover Greater London and the counties of the South East. Good photos up front let us bring everything on the first visit.
Does your area include sites such as Ham Barn Business Park, near The Mint?
Yes. Our area takes in The Mint and its surroundings, with estates and business parks such as Ham Barn Business Park included. A few photographs and the unit address let us price the work.
What will the job cost?
There isn’t a price list, because every site is different. Send photos or drawings and we will price it at a fixed figure.
Do you have public liability insurance?
Yes. We’re fully insured, and the certificate can go with your quote.
What about RAMS and site documents?
Each site asks for different documents, so list what you need, whether RAMS, insurance or CSCS details, and we’ll confirm with the quote.
Will you come and look before quoting?
It depends on the job. Simple work can often be priced from photos, while larger or less clear jobs get a site visit first.
Is it fine to apply new sealant on top of old?
No, never. Overlaying old sealant is a frequent cause of early failure, so everything comes out first.
Do you need coloured sealant in The Mint?
A change of finish can leave existing sealant mismatched. Refurbishments and rebrands often bring a new colour scheme.
If one of these sounds familiar, it’s time for a closer look:
- Untidy coloured beads with ragged edges
- Discoloured joints on a visible elevation
- Marked sealant in hotel bathrooms
- White or grey sealant that clashes with the finish
Offices at parks like Ham Barn Business Park (1.2 miles north-west of The Mint) have receptions, kitchens and glazed partitions where a tidy joint matters.
Comparing quotes
- How they handle RAMS and site documents
- Their public liability cover
- Whether old or failed sealant will be cut out, not overlaid
- Will CSCS-carded applicators be on site?
What The Mint’s businesses ask us to seal
The Mint has at least three named business or industrial parks inside a 3-mile radius. Sites like these see regular refits, with shopfronts, offices and staff areas to seal. At about 46 miles from central London, The Mint is within reach of the capital. This part of the South East is dense with business parks and out-of-town offices. Multi-site occupiers here often want one sealant contractor across all their buildings.
A business with units at Ham Barn Business Park and Longmoor Enterprise Park needn’t use two contractors for its sealant. Premises within reach of Liss station (to the south-west of The Mint) often have busy frontages where joints are seen by everyone passing.
The Mint is about 4 miles north-east of Petersfield, in Hampshire. We send applicators to The Mint for colour-matched joints, handled exactly as we handle every other area. We work across 723 places in Hampshire, from busy centres to rural villages. For work in that direction, see our Portsmouth page.
We cover the GU33 postcode districts for colour-matched joints. Nearby places we also cover include Liss Forest (1 mile north-west), Liss (1 mile south-west), Rake (1 mile south-east), West Liss (1 mile south-west) and Hill Brow (1 mile south). A short drive away, we cover Havant (14 miles south), Horndean (11 miles south-west), Aldershot (14 miles north), Alton (8 miles north-west), Waterlooville (13 miles south-west) and Petersfield (4 miles south-west).
What’s near The Mint
Locally, jobs take us to sites close to The Temple Inn. The closest station to The Mint is Liss station, roughly 0.8 miles south-west of the centre. A little further out are Chase Community Hospital (3.9 miles north). Not far away are Liss Riverside Railway Walk North and Wheatham Hill.