Somerley coloured sealant
Planning work on a colour-matched joint in Somerley? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Colour changes after a rebrand or refit
- Poorly tooled joints on visible finishes
- Failed coloured sealant that has split or peeled
Coloured sealant near Somerley
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Coloured sealant in Somerley, done properly
Stone, brick and cladding each bring their own colour challenge: sandstone, granite, brick and stained timber rarely have one flat colour. We choose a colour that reads well across the surface rather than chasing one spot, with a sample on site if colour is critical. If you have hotel refurbishments with a set colour scheme and a bead that fights the cladding or frame colour, we can put it right, on office fit-out finishes, natural stone and brick and hotel bathrooms and public areas alike. Most enquiries from Somerley start with one failed joint and grow into a wider look at the building: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Business units in the countryside around places like Somerley are often converted barns, stables or farmyards. Old masonry beside new aluminium, timber and plasterboard gives plenty of joints between materials that move differently.
Every job is signed off with a 12-month guarantee. It’s a plain promise: if our work fails within that year, we put it right.
- Place
- Somerley (PO20)
- Wider area
- West Sussex
- Cover
- A 12-month guarantee
- Quotes
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Doing it in-house
What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are where general trades tend to cut corners.
General builders and handymen seal joints, but it isn’t their main trade. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint.
Working on commercial sites near Somerley
Somerley lies within about 2 miles of the sea. Shopfronts, frames and external joints on commercial buildings there take wind-driven rain and, closer to the shore, salt in the air. A matched colour is only half the brief on an exposed frontage. At about 59 miles from central London, Somerley is within reach of the capital. The South East around the capital has large numbers of business parks, offices and retail centres, especially around the motorway corridors. Firms with branches across the South East can use one contractor for every site.
Parks like Enborne Business Park, 2.8 miles to the south-east of Somerley, see tenants come and go, and every move-in brings joints to seal. Shops and cafés around stations like Fishbourne station, 4 miles north of Somerley, trade from early, so work is timed around them.
Somerley is about 4 miles north-west of Selsey, in West Sussex. We cover Somerley and the rest of West Sussex, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Somerley is one of 373 places we cover in West Sussex. Portsmouth is covered too, some 10 miles away.
If you need coloured sealant in PO20, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. Among the streets we cover are Bell Lane and Hundredsteddle Lane. Nearby places we also cover include Almodington (1 mile south-east), Birdham (1 mile north-east), Shipton Green (1 mile north-west), Earnley (1 mile south) and East Wittering (2 miles south-west) for colour-matched joints. Nearby towns on our patch include Bognor Regis (7 miles east), Chichester (5 miles north-east), Selsey (4 miles south-east), Littlehampton (14 miles east), Rustington (15 miles east) and Portfield (5 miles north-east).
Landmarks near Somerley
Locally, jobs take us to sites close to The Birdham Public House and the streets around them. Somerley’s nearest station is Fishbourne station, roughly 4 miles north of the centre. A little further out are Chichester Castle (4.9 miles north-east) and St Richard's Hospital (5.2 miles north-east). Open spaces near Somerley include Pilsey Island.
FAQs: Somerley
Is Enborne Business Park, near Somerley, within your area?
Yes. Our area takes in Somerley and its surroundings, with estates and business parks such as Enborne Business Park included. Send details of the unit and the work through our quote form for a quick quote.
Can being near the sea in Somerley affect the sealant we need?
It can, yes: buildings near the sea take more wind-driven rain, and salt in the air nearer the shore. We choose the product for the exposure, prime where the manufacturer requires it and size the joint for its movement.
Can we specify the colour by RAL number?
Yes. Many specifications give the sealant colour as a RAL number. We will confirm the colours available for the specified product.
Is any job too small?
Whatever the size, the process is the same: details, then a fixed price, then sealing, then a 12-month guarantee.
Are you fully insured?
Yes. We are fully insured, including public liability cover.
Will the sealant be an exact match to our finish?
No. We can’t promise an exact custom match. Sealants come in a wide range of standard colours, and we will confirm the colours available for the specified product.
When is resealing likely to be due?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Treat them as maintenance items and inspect them regularly.
On site: what to expect
Inspect, seal, sign off: every visit follows that pattern. We inspect the joints and confirm what’s in scope, then the work is carried out to the specified product and detail, and the job ends with a walk round and sign-off. Smaller jobs around Somerley can be grouped with others nearby, which keeps travel down. A fixed quote is given before anything starts.
- We start with photos, drawings or a visit to see the finishes.
- Colour options from the specified product’s range are shared with you.
- The programme and access are agreed, including any phasing.
- Joints are prepared, primed where specified and backed.
- We seal in the approved colour and tool it smooth.
Preparing the site
- Share the asbestos register for older buildings
- Explain the parking and delivery arrangements
- Tell us which areas need to stay in use
Ask for a quote
Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price the work to it. Smaller jobs need nothing more than photographs and a few notes.
Read more
Why it’s worth doing now in Somerley
A failed joint lets in water and dirt, whatever colour it is. Water through a split seal can stain or damage the surfaces next to it, so resealing protects the finishes as well as the look. One visit to deal with every failing joint makes more sense than several trips to a place like Somerley, rather than one at a time. Send photographs of each area and we will quote for the lot.
No two sites price the same: joint size, product, access and site hours all play a part. Send the details and a fixed figure follows.
What you get with us
- Colours confirmed for the specified product
- Commercial sealant work since 2005
- Constructionline member
- RAL and finish matching where the product range allows
See how commercial sealant jobs are priced and our accreditations.
How the job changes by surface
Brick and masonry
On brick, the sealant often matches the mortar rather than the brick face. The nearest colour in the range is agreed with you.
Office fit-outs
In offices, sealant appears at partitions, tea points, washrooms and reception desks. A consistent colour across floors looks deliberate.
Places near Somerley
More services for Somerley
After the work
Your facilities or cleaning team can help the joints last. Pass these on to them:
- Keep the colour details for future repairs
- Protect fresh coloured sealant from dust and handling
- Agree the sealant colour early and write it into the specification
- Avoid abrasive pads on coloured sealant
Clean coloured joints with mild, non-abrasive products. Strong solvents and abrasive pads can dull or mark the surface.
Include coloured joints in a planned maintenance cycle. Replacing them on a schedule keeps finishes looking right across the building.
For managing agents and facilities managers
FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we will confirm with the quote.
Hotels, schools, healthcare sites, offices and retail units book us directly too. The work is planned around how the building runs, so guests, pupils, patients or staff are disturbed as little as possible.