Coloured Sealant contractors in Earnley
Coloured and colour-matched sealant for visible joints in Earnley and across West Sussex. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Untidy coloured beads with ragged edges
- Standard-colour sealant spoiling a high-end finish
- Fit-outs with a sealant colour in the specification
Need coloured sealant in Earnley?
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
About our coloured sealant in Earnley
In retail, hospitality and office fit-outs, joints are seen close up every day. A grey bead on a black shopfront or a white line against oak looks like a defect, even when the seal is sound. We pick a colour from the product’s range that sits with the finish. Site teams most often ask us about colour changes after a rebrand or refit and dirty, discoloured joints in public areas, across natural stone and brick, powder-coated and anodised frames and cladding panels. One point of contact handles commercial sealant work in Earnley from the first photographs to the final walk-round, whether it’s one building or several.
Work in smaller places such as Earnley tends to come one building at a time: a pub kitchen, a hall, a small office. We’ll want a full list and photos first, so the right products come on the day and nothing waits for a second trip.
Every job we finish is backed by a 12-month workmanship guarantee. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Place
- Earnley (PO20)
- Region
- West Sussex
- Cover
- 12 months on our workmanship
- Price
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Questions we are asked in Earnley
Is Earnley too small for you to travel to?
Not at all: smaller places are covered as well as towns. We work across Greater London and the South East. Good photographs up front let us bring everything on the first visit.
Does your area include sites such as Enborne Business Park, near Earnley?
Yes. Our area takes in Earnley and its surroundings, with estates and business parks such as Enborne Business Park included. Photos and a short description are enough for a first look.
What if there’s asbestos in the old mastic?
The duty to manage asbestos sits with the building’s dutyholder, so we will ask for the register before work on an older building. Work pauses if suspect material is found, until it has been tested.
Are you CHAS accredited and on Constructionline?
Yes. We’re CHAS accredited and a Constructionline member.
Do you seal on top of existing sealant?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, since fresh sealant will not bond reliably to aged material.
Do you need to see the site first?
It depends on the job. Straightforward work can often be priced from photos and measurements, and bigger or more complex jobs usually get a visit.
Can you match any colour exactly?
No, not always. We choose the nearest standard colour and can agree a sample bead first.
What affects the price in Earnley
What shapes the price:
- Which sealant the job calls for
- Travel to remote or island sites
- How much existing material needs removing
- The site’s rules and procedures
A quote for colour-matched joints depends on quantities, condition and access, and any specification that applies. Call for a quote.
What we need to price the job
To price the job accurately, we need to understand the site. Useful things to include:
- Asbestos survey details if the building is older
- Where the site is, with the postcode
- How the joints are reached, and at what height
- A wide shot and a close-up of the area
Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price the work to it. Smaller jobs need nothing more than photos and a few notes.
How a job runs
Before we leave any area, we remove the tape, clean down and inspect every joint, ready for your sign-off. Where the sealant needs time to cure before use, we tell you and sign the area. Jobs in and around smaller places like Earnley are usually planned as a single visit, so photos and measurements up front really help. That way the right products come on the day.
- We confirm the joint type and the product it needs.
- Your RAL reference, sample or photo is checked against that product’s colours.
- You approve the colour, on site if it’s critical.
- We cut out the existing bead, clean and set the depth.
- Edges are masked and the coloured sealant applied and tooled.
- We remove the masking and walk the finished joints with you.
What we need from you
- Explain the parking and delivery arrangements
- Let us know about inductions and permits
- Share your working hours and any access restrictions
Get a fixed quote
A handful of photos and a postcode is the fastest way to a quote. Send them through the quote form, or speak to us on 01277 525 020 or email the details over if you’d rather talk the job through.
Related advice
What the job involves on each surface
Brick and masonry
Vertical movement joints run the full height of many brick walls. The right colour keeps them discreet without affecting the joint’s performance.
Office fit-outs
Partition frames and joinery are often in a set colour. We choose sealant colours to suit and agree them before work starts.
When to call us in Earnley
Older sealant changes colour over time. UV, grime and weathering alter how a bead looks after a few years, and an old match drifts. Resealing is the chance to reset the colour.
Any of the following is a good reason to get the joints checked over:
- White or grey sealant that clashes with the finish
- Previous reseals that don’t match the original
- Untidy coloured beads with ragged edges
- Stained or mouldy coloured joints in washrooms
Offices at parks like Enborne Business Park (2.5 miles east of Earnley) have receptions, kitchens and glazed partitions where a tidy joint matters.
Comparing quotes
- Who will actually carry out the work
- How joint depth will be controlled
- How they’ll work around occupants
- Their pre-qualification and accreditations
Places near Earnley
What else we do in Earnley
Why deal with it now?
Standard white or grey sealant is cheaper to stock, but it doesn’t always suit the finish. On visible work, the small extra effort of a colour from the product’s range pays off. One visit to deal with every failing joint makes more sense than several trips to a place like Earnley, rather than one at a time. Photos of every joint help us quote for the whole job.
Small jobs and large programmes are priced from the same things: scope, access, product and programme. Call for a quote, and you’ll have a fixed figure to work with.
Why choose Mastic Doctor in Earnley
- Matching to RAL references, product permitting
- Health and safety: CHAS accredited
- Failed material removed, not covered up
- Sealing commercial buildings since 2005
Owners, agents and contractors
Hotels, schools, healthcare sites, offices and retail units book us directly too. The work is planned around how the building runs, so the building keeps working while we do.
Agents, factors and owners’ representatives all follow the same route: send details, get a fixed quote, we seal, guaranteed. Keys, access and contacts can be agreed in advance.
What Earnley’s businesses ask us to seal
Earnley sits close to the coast, within about 2 miles. Exposed frontages near the sea are hard on sealant, so the product has to suit the weather as well as the look. A matched colour is only half the brief on an exposed frontage. Two named trading, business or retail sites lie within about 3 miles of Earnley. Tenant changes on such sites bring fit-outs, and fit-outs bring new joints, often in a colour the occupier specifies.
If you have premises on more than one site, say at Enborne Business Park and Ferry Yard Industrial Park, one contractor and one quote can cover both.
Earnley is about 3 miles north-west of Selsey, in West Sussex. We send applicators to Earnley for colour-matched joints, handled exactly as we handle every other area. Earnley is one of 373 places we cover in West Sussex. We also cover Portsmouth, some 11 miles away.
If you need coloured sealant in PO20, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. Streets here include Earnley Manor Close, Bookers Lane and Drove Lane, and sites on any of them can send details for a fixed quote. If your building is just outside Earnley, we cover East Wittering (1 mile west), Almodington (1 mile north-east), Somerley (1 mile north), Shipton Green (2 miles north) and Birdham (2 miles north). A short drive away, we cover Bognor Regis (7 miles east), Chichester (6 miles north-east), Selsey (3 miles south-east), Littlehampton (14 miles east), Rustington (15 miles east) and Portfield (6 miles north-east).
Local landmarks in Earnley
Nearby you will also find Selsey Lifeboat Museum (3.9 miles south-east). Not far away are Pilsey Island.