Coloured and colour-matched sealant in Faversham, Kent
We carry out coloured and colour-matched sealant for visible joints in Faversham and the surrounding area. Send photos or drawings for a fixed quote.
- Patch repairs in several different colours
- Standard-colour sealant spoiling a high-end finish
- Discoloured joints on a visible elevation
Coloured sealant in Faversham
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Coloured sealant for commercial buildings in Faversham
Architects, designers and brand teams often specify the sealant colour as carefully as the finishes around it. Most sealant types are made in a broad range of standard colours, and we’ll confirm the colours available for the specified product before we quote. We don’t promise an exact custom match, but we’ll show you the closest options. We work on powder-coated and anodised frames, office fit-out finishes and cladding panels, and what we’re called in for most is standard-colour sealant spoiling a high-end finish and a run of joints in mismatched shades. Most enquiries from Faversham start with one failed joint and grow into a wider look at the building: we look at the rest while we’re there and tell you what we find.
A town such as Faversham typically has a high street, some business units, schools and a surgery or two. Shopfronts, kitchens, washrooms and frames all have sealant that ages.
Work we carry out comes with a 12-month guarantee. If an installation problem shows up, ring 01277 525 020 or send details through our quote form and we will arrange a return visit.
- Place
- Faversham (ME13)
- Wider area
- Kent
- Cover
- 12 months on our workmanship
- Quote
- A fixed quote before we start
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
When something else is needed
We seal joints; we don’t mend everything behind them. Sealant alone won’t deal with:
- Finishes that change colour from one area to another
- Restoring stained stone or masonry next to old sealant
- Paint over sealant on joints that move too much
If you are not sure, just call the office on 01277 525 020 or send details through our quote form and we’ll give you a straight answer before you book.
Joints and surfaces we work on
- Shop-fit joinery and counters
- Natural stone and brick
- Cladding panels
- Office fit-out finishes
- Powder-coated and anodised frames
- Hotel bathrooms and public areas
When to bring in a specialist
The visible bead is only part of the job. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
Redoing a failed joint typically costs more than getting it right at the outset, since all of it has to come out and the faces be cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
What affects the price in Faversham
Sealant work doesn’t have a standard rate, since sites vary so much. What we take into account:
- Removal of failed or old sealant
- Joint width, depth and condition
- The site’s rules and procedures
- Travel to remote or island sites
The product called for affects the cost, as does the preparation each joint needs, from cutting out to priming and backing rod. Access, phasing and site rules also count.
Details that help us quote
Good information means a firmer quote. When you get in touch, include:
- Whether the building will be occupied during the work
- The asbestos register, for older buildings
- Clear photographs of the problem areas
- Your programme or deadline
Tell us about the building, the joints and when you need the work done, and we’ll put a fixed quote together. To get it moving, call 01277 525 020 or email us.
FAQs: Faversham
Must a hotel around Faversham close while you work?
In the majority of cases no closure is needed: we work room by room or floor by floor. Tell us your quiet periods and access windows and we will plan around them.
Do you offer colour-matched sealant for buildings in Faversham?
Yes, we can normally get close to most finishes from the product’s colour range. Available colours for the product are confirmed with the quote.
How soon can the area be used again?
That comes down to the sealant and the temperature. Some products skin over quickly but need longer to cure fully, so we will confirm the curing time on the day.
What hours do you work?
The office is staffed Monday to Friday, from 8am until 5pm. Let us know your site hours and access windows, and the work will be planned around them.
Are you CHAS accredited?
Yes. Mastic Doctor is CHAS accredited and a Constructionline member.
Are you fully insured?
Yes. Mastic Doctor is fully insured, public liability included.
How many days will you need on site?
It depends on the scope, though a typical visit usually takes about the same time as any other sealant work, plus a little longer if a sample bead is agreed first. For bigger or phased jobs, we’ll set out a timescale with the quote.
On site: what to expect
Before we leave any area, we remove the tape, clean down and inspect every joint. If an area should be left alone while the sealant cures, we say how long and put signs out. If you have more than one building in Faversham, they can often be done on the same visit. Give us your access times and we’ll fit the work in.
- Photos or drawings show us the finishes and joints.
- We send the closest colours from the product’s range.
- The programme and access are agreed, including any phasing.
- We prepare each joint, prime where needed and fit backing.
- We seal in the approved colour and tool it smooth.
Getting the site ready
- Point out any areas we must not close
- Send your site hours and access windows
- Make sure the joints can be reached
Getting a fixed quote
Pricing a project or setting a maintenance budget? We will quote against your scope and drawings you can plan around. For a chat about it beforehand, phone 01277 525 020 or email a schedule or drawings.
Read more
Nearby places to Faversham
More services for Faversham
Aftercare for building managers
Problems stay small when the joints are checked regularly. In particular:
- Record the product and colour reference on the building file
- Put the colour reference on the finishes schedule
- Avoid abrasive pads on coloured sealant
- Brief cleaners about newly sealed joints
Don’t let anyone patch a coloured joint with whatever sealant is to hand. A mismatched repair stands out, undoing the look you paid for.
Approve a sample where colour really matters. Seeing the cured colour in place avoids surprises.
When to call us in Faversham
Failed sealant still has to be dealt with, whatever its colour: splits, adhesion loss and hardening all happen. We cut out and reseal in the agreed colour.
Look out for the following:
- Old colour-matched joints lifting at the edges
- A bead that fights the cladding or frame colour
- Weathered sealant that no longer matches
- Joints that need to match a new RAL frame colour
Refits at hotels like The Ship Hotel, under half a mile east of Faversham, bring joints at vanity tops, bars and reception desks that guests see every day.
Questions to ask before you book
- Their approach to joint depth and backing
- Proof of insurance
- The named product and why it was chosen
- Are they CHAS accredited or on Constructionline?
Working on commercial sites near Faversham
Faversham lies within about 3 miles of the sea. Shopfronts, frames and external joints on commercial buildings there take wind-driven rain and, closer to the shore, salt in the air. Sea-facing elevations are usually where failed joints show first. Central London is about 44 miles from Faversham. Business parks and retail centres are common around the capital’s motorway corridors. Multi-site occupiers here often want one sealant contractor across all their buildings.
Offices and shops close to stations such as Faversham station (to the south-east of Faversham) tend to be busy all day, so sealant work is planned around opening hours.
Faversham is about 9 miles west of Canterbury, in Kent. If you are looking for coloured sealant in Faversham, we can help, as we do across Kent. Our Kent coverage takes in 931 places. Sites around London have their own page, about 44 miles away.
We take on colour-matched joints across the ME13 postcode area, whatever the building. We cover commercial and managed buildings on Bedlington Square, Market Place and Market Street. With the A2 and A251 nearby, Faversham is straightforward for us to reach. We also cover Davington (1 mile north-west), The Brents (1 mile north-east), Preston (1 mile south-east), Ospringe (1 mile south-west) and Whitehill (1 mile south-west). Bigger towns within reach include Ashford (12 miles south), Canterbury (9 miles east), Sittingbourne (7 miles west), Whitstable (7 miles east), Herne Bay (11 miles east) and Minster (8 miles north-west).
Near you in Faversham
Recent enquiries here include premises near Mechanics Arms, Queen Elizabeth's Grammar School and Oare Meadow. Faversham has its own railway station: Faversham station. Well-known places in the area include Newnham Castle (4.2 miles south-west).