Ram Lane coloured sealant
Our CSCS-carded applicators take on coloured and colour-matched sealant for visible joints in Ram Lane and the surrounding area. Send photographs or drawings for a fixed quote.
- White or grey sealant that clashes with the finish
- Fit-outs with a sealant colour in the specification
- Poorly tooled joints on visible finishes
Coloured sealant across Ram Lane
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
About our coloured sealant in Ram Lane
Coloured sealant is a finishing trade, so it usually comes late in a programme. We work around other trades and protect adjacent finishes, and snag any marks before we leave. Our workmanship carries a 12-month guarantee. If you have poorly tooled joints on visible finishes and standard-colour sealant spoiling a high-end finish, we can put it right, whatever the surface. Whoever orders the work in Ram Lane, the brief is typically the same: a clear scope, tidy work and joints that don’t fail again.
In and around smaller places such as Ram Lane, the commercial buildings we are asked about are often pubs, shops, village halls and barns converted to offices. Kitchens, toilets and window frames in all of them need resealing sooner or later.
The 12-month guarantee is for workmanship rather than wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we are clear about what is covered before work starts.
- Place
- Ram Lane (TN26, TN25)
- Region
- Kent
- Guarantee
- 12 months on every job
- Price
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
On site: what to expect
At the end of each section, the masking comes off, the area is cleaned and every joint is checked. Where the sealant needs time to cure before use, we tell you and sign the area. If others near Ram Lane need work, visits can be combined, which keeps travel down. You will have a fixed quote before work starts.
- Photos or drawings show us the finishes and joints.
- Colour options from the specified product’s range are shared with you.
- Tell us your site hours and access windows and we’ll plan around them.
- Joints are prepared, primed where specified and backed.
- We seal in the approved colour and tool it smooth.
What we need from you
- Explain the parking and delivery arrangements
- Let us know about inductions and permits
- Confirm the product named in the specification
Ask for a quote
To get a fixed quote, give us a call on 01277 525 020 or email us with the site address and an outline of the work. Our quote form is another easy route.
Related advice
Commercial premises in Ram Lane
Ram Lane lies roughly 45 miles out from central London. This part of the South East is dense with business parks and out-of-town offices. Firms with branches across the South East can use one contractor for every site. The South East is one of the drier parts of the UK. That helps, but frost and condensation on glass and coated frames still stop outside sealing on some winter mornings.
On a business park such as Eurogate Business Park, 2.9 miles south-east of Ram Lane, sealant work tends to follow fit-outs: receptions, tea points, washrooms and frame perimeters.
Ram Lane is about 4 miles north-west of Ashford, in Kent. We cover commercial sites throughout Ram Lane. Ram Lane is one of 931 places in Kent on our list for colour-matched joints. There’s a separate page for London, roughly 45 miles from Ram Lane.
Commercial sites across TN26 and TN25 are covered for colour-matched joints. If your building is just outside Ram Lane, we cover Tutt Hill (1 mile south-east), Westwell Leacon (1 mile north-west), Hothfield (1 mile south), Westwell (1 mile east) and Potters Corner (2 miles south-east). Nearby towns on our patch include Maidstone (14 miles north-west), Ashford (4 miles south-east), Canterbury (13 miles north-east), Sittingbourne (11 miles north), Whitstable (15 miles north-east) and Faversham (9 miles north).
Near you in Ram Lane
The closest station to Ram Lane is Charing station, roughly 1.8 miles north-west. A little further out are County Square (3.6 miles south-east) and William Harvey Hospital (5.4 miles south-east).
What we can’t put right
Part of a good diagnosis is knowing where sealant stops. You will hear from us if the cause turns out to be any of the following:
- Restoring stained stone or masonry next to old sealant
- Paint over sealant on joints that move too much
- Preventing all fading from sunlight and weathering
If you’re not sure, just call the office on 01277 525 020 or email the details over and we will give you a straight answer.
Joints and surfaces we work on
- Cladding panels
- Powder-coated and anodised frames
- Natural stone and brick
- Hotel bathrooms and public areas
- Office fit-out finishes
- Shop-fit joinery and counters
Should maintenance staff do it?
Using site staff can make sense for a small touch-up, but anything bigger is another matter: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
How the quote is worked out
We price every job individually. The things that drive the figure:
- Joint width, depth and condition
- How much existing material needs removing
- Quantities, in metres or numbers
- Induction, permit and paperwork requirements
Quantities, awkward access and phased working all shape the price. Site requirements like inductions and permits play a part as well, along with the time of year for external work.
Details that help us quote
There’s no need for a formal survey. These details are enough to start:
- Any dates the work must fit around
- Whether an asbestos survey exists
- Approximate linear metres or a joint schedule
- How the joints are reached, and at what height
Need a figure for a tender or a budget? We’ll quote against your scope and drawings that you can work with. For a chat about it beforehand, give us a call on 01277 525 020 or email the details over.
Questions we are asked in Ram Lane
Will you take on work at estates like Eurogate Business Park, close to Ram Lane?
Yes. Our area takes in Ram Lane and its surroundings, with estates and business parks such as Eurogate Business Park included. To start, just ring 01277 525 020 or email drawings and photos with the unit, the joints involved and your access times.
Can you match sealant colours for premises in Ram Lane?
Yes, we can normally get close to most finishes from the product’s colour range. Available colours for the product are confirmed with the quote.
How long does a typical visit take?
It depends on the scope, but the work normally takes a day for a modest shop fit, and longer for a full building or several floors. Larger or phased jobs take longer, and we will give you a timescale with the quote.
Is Ram Lane in your area?
Yes. Ram Lane is in our area and the rest of Kent. For a quote, speak to us on 01277 525 020 or email us.
How long do sealant joints last?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Treat them as maintenance items and inspect them regularly.
When can the area be used after sealing?
That comes down to the sealant and the temperature. Some products skin over quickly but need longer to cure fully, and we confirm it before leaving site.
Will you just go over the old sealant?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, since fresh sealant will not bond reliably to aged material.
Towns and villages near Ram Lane
What else we do in Ram Lane
Different surfaces, different methods
Cladding panels
Panel joints form a grid on the facade, so colour matters. The colour is picked from the range of a sealant that suits the panel joint, rated for the joint’s movement.
Office fit-outs
In offices, sealant appears at partitions, tea points, washrooms and reception desks. A consistent colour across floors looks deliberate.
What we’re called out for in Ram Lane
Older sealant changes colour over time. UV, grime and weathering alter how a bead looks after a few years, and an old match drifts. Resealing is the chance to reset the colour.
Site and facilities staff are often the first to spot these:
- Untidy coloured beads with ragged edges
- A run of joints in mismatched shades
- Joints that need to match a new RAL frame colour
- Hotel refurbishments with a set colour scheme
For premises near Charing station (1.8 miles north-west of Ram Lane), footfall is part of the plan: work is phased so shops and offices keep trading.
Questions to ask before you book
- What level of public liability insurance do they hold?
- The terms of the workmanship guarantee
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- Whether old or failed sealant will be cut out, not overlaid