Coloured and colour-matched sealant in Throwley Forstal, Kent
Our CSCS-carded applicators take on coloured and colour-matched sealant for visible joints in Throwley Forstal and the surrounding area. Send photos or drawings for a fixed quote.
- Previous reseals that don’t match the original
- Standard-colour sealant spoiling a high-end finish
- Old colour-matched joints lifting at the edges
Coloured sealant near Throwley Forstal
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Commercial clients in Throwley Forstal
Main contractors use us as their sealant subcontractor. We work to your programme, your specification and your site rules, and our applicators hold CSCS cards.
We work for building owners and managing agents on sealant work across single buildings or whole portfolios. Several sites can go on one quote, which keeps the paperwork simple.
About our coloured sealant in Throwley Forstal
Coloured sealant is a finishing trade, so it normally comes late in a programme. Adjacent finishes are masked and protected while we work, and we leave the area clean. A 12-month guarantee covers our workmanship. If you have shop fits that need consistent sealant colours across sites and a bead that fights the cladding or frame colour, we can put it right, whatever the surface. For commercial sealant work in Throwley Forstal, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.
A job in a smaller place like Throwley Forstal is typically a single building. We will want a full list and photos first, so the right products come on the day and nothing waits for a second trip.
What our 12-month guarantee covers is the way we did the job: preparation, application and finish. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Location
- Throwley Forstal (ME13)
- Region
- Kent
- Guarantee
- 12 months on every job
- Quotes
- Quoted before any work starts
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Also near Throwley Forstal
What else we do in Throwley Forstal
Site staff or a sealant specialist?
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
Why deal with it now?
Resealing a full run gives a consistent colour. Small repairs at different times rarely match. For buildings around smaller places like Throwley Forstal, water damage can go unnoticed for longer, especially where a building isn’t used daily, so a failed joint can leak for a while before anyone sees it. Renewing joints in good time avoids the problem.
There’s no price list, since every building and every scope is different. Call for a quote and we will price your job on its own details.
Why appoint us
- Coloured sealants to suit the setting, where available
- Commercial sealant work since 2005
- CSCS-carded applicators
- One number for every site we cover
Take a look at how commercial sealant jobs are priced and how we’re accredited.
Sealant on show in Throwley Forstal’s commercial buildings
The South East is one of the drier parts of the UK. Drier doesn’t mean dry every day, so frontage work still has some give in the dates. At about 44 miles from central London, Throwley Forstal is within reach of the capital. This part of the South East is dense with business parks and out-of-town offices. Firms with branches across the South East can use one contractor for every site.
For any commercial premises in Throwley Forstal, a lasting joint depends on full removal of the old sealant and clean, dry faces. Premises within reach of Selling station, 4.1 miles to the east of Throwley Forstal, often have busy frontages where joints are seen by everyone passing.
Throwley Forstal is about 4 miles south of Faversham, in Kent. We cover commercial sites throughout Throwley Forstal. Across Kent, 931 places are covered, including Throwley Forstal. We also cover London, some 44 miles away.
If you need coloured sealant in ME13, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. We also cover Throwley (1 mile north), Badlesmere (1 mile east), Sheldwich (2 miles north-east), Sheldwich Lees (2 miles north-east) and The Valley (2 miles west) for colour-matched joints. A short drive away, we cover Maidstone (14 miles west), Ashford (8 miles south), Canterbury (10 miles east), Sittingbourne (8 miles north-west), Whitstable (10 miles north-east) and Faversham (4 miles north).
What’s near Throwley Forstal
The nearest railway station is Selling station, about 4.1 miles east. Other landmarks nearby include Newnham Castle (3 miles north-west).
When it isn’t the sealant
Not every problem is a sealant problem, and we’d rather tell you before you spend money. It won’t fix:
- Stopping sealant from ever changing colour outdoors
- Paint over sealant on joints that move too much
- Repairing damaged frames or cladding
If in doubt, call the office on 01277 525 020 or use the quote form and we will say what we think.
Surfaces we seal
- Natural stone and brick
- Hotel bathrooms and public areas
- Powder-coated and anodised frames
- Cladding panels
- Office fit-out finishes
- Shop-fit joinery and counters
Our process
Where the site stays busy, the work is phased so only one area is out of use at a time. Each section is protected, cleaned back and sealed before we move to the next. Rural sites near Throwley Forstal may need directions, gate codes or a contact on site. Add it to your enquiry and we will build it into the plan.
- We confirm the joint type and the product it needs.
- Your RAL reference, sample or photo is checked against that product’s colours.
- You approve the colour, on site if it’s critical.
- The existing bead comes out, then faces are cleaned and backed.
- We mask, seal and tool to a clean line.
- We remove the masking and walk the finished joints with you.
Before we start on site
- Explain the parking and delivery arrangements
- Make sure the joints can be reached
- Let us know about inductions and permits
Request a quote
Every quote starts with the facts: the joints involved, quantities, access and the product called for. Share whatever details you have and we’ll fill any gaps with a visit.
Related advice
Questions we’re asked in Throwley Forstal
Do you offer colour-matched sealant for buildings in Throwley Forstal?
Yes. Colour matching to frames, cladding, stone and shop-fit finishes is a regular part of the work. The quote lists the colours the product is made in.
Which documents can you supply for work in Throwley Forstal?
Whatever your site asks for, from RAMS to CSCS details, is confirmed when we quote. We’re CHAS accredited and a Constructionline member, with £5m public liability insurance and CSCS-carded applicators.
How many days will you need on site?
We plan the time on site around your programme and access. You’ll have an expected duration with the quote.
Are you fully insured?
Yes. Mastic Doctor is fully insured, public liability included.
What do you charge?
That depends on the job: the volume of work, the access, the specified product and how it’s phased. Call for a fixed quote.
Can you work to our specification?
Yes. We follow the specification, along with the manufacturer’s installation guidance, and we raise anything unclear before work begins.
Are you CHAS accredited?
Yes. We’re CHAS accredited and a Constructionline member.
Surface by surface
Office fit-outs
In offices, sealant appears at partitions, tea points, washrooms and reception desks. A consistent colour across floors looks deliberate.
Paintable sealants
Paintable sealants suit internal, low-movement joints best. We’ll tell you if a joint needs a non-paintable product.